• 한국시스템다이내믹스연구
• /
• 제5권1호
• /
• pp.5-33
• /
• 2004

This study explores how agents would make decisions responding to control mechanism in contractual relationship of their firm. Focusing on agent's averse behavior against control, system dynamics model for agent's opportunistic behavior is developed in view of agent theory and control theory. This SD model shows that control mechanism by contracts doesn't always play a positive role on corporate decision-making process and Control, especially in the over-controlled contracts, often makes a paradox accelerating agent's opportunistic behavior unexpectedly. This paradox provides us both theoretical and practical implications for the relationship between control mechanism and autonomous behavior for sustainable corporate management.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.70-78
• /
• 2004

NATM 시공에서 급결제의 사용은 일반화되어 있으나 품질 및 시험기준의 제정은 미흡한 실정이다. 본 연구는 숏크리트용 급결제에 대한 국내외 품질기준 비교 및 시험을 수행하여 규격의 적정성을 평가하였다. 실리케이트계, 알루미네이트계 및 시멘트광물계 급결제의 알칼리함유량이 매우 높게 나타나 사용골재의 반응성 평가에 대한 관리 및 시험빈도를 높여야 할 것으로 생각된다. 또한 응결시험결과 BS 시험방법이 정량적인 것으로 판단되었으나, 실리케이트계 및 알칼리프리계 급결제는 첨가방법에 따라 응결시간이 큰 차이를 나타내었다. 압축강도는 실리케이트계, 알루미네이트계 및 급결성 시멘트 광물계의 재령 1일 강도는 $90kgf/cm^2$ 이상으로 한국콘크리트학회 규준을 만족하나 플래인 모르타르 강도대비 재령 28일 압축강도비는 알칼리프리계를 제외하고 $50{\~}65\%$ 정도를 나타내었다. 따라서 재료특성 및 국내터널 시공방법 반영과 품질향상을 도모할 수 있는 규격제정이 시급히 요망되었다.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.153-157
• /
• 2013

The defect like the void or seam is frequently generated in the PCB (Printed Circuit Board) Via-Filling plating inside via hole. The organic additives including the accelerating agent, inhibitor, leveler, and etc. are needed for the copper Via-Filling plating without this defect for the plating bath. However, the decomposition of the organic additive reduces the lifetime of the plating bath during the plating process, or it becomes the factor reducing the reliability of the Via-Filling. In this paper, the interaction of each organic additives and the decomposition of additive were discussed. As to the accelerating agent, the bis (3-sulfopropyl) disulfide (SPS) and leveler the Janus Green B (JGB) and inhibitor used the polyethlylene glycol 8000 (PEG). The research on the interaction of the organic additives and decomposition implemented in the galvanostat method. The additive decomposition time was confirmed in the plating process from 0 Ah/l (AmpereHour/ liter) to 100 Ah/l with the potential change.

• Journal of Plant Biology
• /
• 제15권2호
• /
• pp.1-6
• /
• 1972

Cultivar Yeollow Special A, the most leading Korean economic leaf tobacco in Korea, were field-cultivated in four different localities of Korea for the period of two years (1970 and 1971) and sprayed at varied levels of 2-chloroethyl phosphonic acid (CEPA) for foliar application few days after topping. While no striking difference in leaf yield by weight was obtained among the treatments when compared with control, leaf quality as expressed for shipment price in won tended when compared with control, leaf quality as expressed for shipment price in won tended to improve. The treated leaves with 300 to 900 ppm of CEPA (approximately 140 1/acre of 500 ppm) not only showed yellowing and accelerated maturity to pick 4 to 5 days with practicable optimal level earlier than control, but also speeded up to take nearly with practicable optimal level earlier than control, but also speeded up to take nearly last half of the total time required for the five stages of flue-curing. It is therefore considered that CEPA is as effective maturity-accelerating agent and useful as known for other solanaceous plants showing climacteric stage respiration, and discussions were made about physiological actions of ethylene gas released from CEPA at plant tissues sprayed.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.68-73
• /
• 1997

Urea/formaldehyde(UF) and melamine/formaldehyde(MF) microcapsules containing perfume and 2,4,4'-trichlroro-2-hydroxydiphenyl ether(DP) were prepared by the in-situ polymerization using urea and formaldehyde. Effects of dispersing agent, accelerating agent, formaldehyde, agitation speed on the mean diameter of microcapsules were investigated. The diameter of microcapsule was decreased with increasing dispersing agent concentration. A slight increase in the diameter was observed when the concentration of film forming material was increased. The diameter of microcapsule was decreased with increasing agitation speed up to 8,000rpm. The mean diameters of UF microcapsule prepared at 8,000rpm are about 3$\mu$m. A slight decrease in the diameter was observed when the concentration of resorcinol was increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.505-508
• /
• 2004

This paper investigated the setting and compressive strength of concrete with the combination of mineral and chemical admixture. According to test results, plain concrete with high early strength development type AE water reducing agent(HEAEWRA) and $10\%$ of CKD respectively had earlier setting time than concrete with AE water reducing agent by $0.5\~1.5$ hours. Setting time of concrete with retarding type AE water reducing agent(RAEWRA) and FA $30\%$, BS $60\%$ respectively retarded by as much as $4\~7.5$ hours compared with plain concrete. Plain concrete with HEA WRA, $10\%$ of CKD and RAEWRA had higher strength than that of AE water reducing agent by as much as 5MPa at 28days. From the result of the paper, it is found that the combination of mineral admixture and setting accelerating or retarding agent can reduce the hydration heat cracks by setting time difference and hydration heat reduction effects.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.195-200
• /
• 2011

KS F 2782(숏크리트용 급결제) 규격은 터널시공 또는 단면보수 보강 현장에서 사용되는 숏크리트용 급결제의 성능을 평가하기위한 규격이라 볼 수 있다. KS F 2782(숏크리트용 급결제) 규격에 의한 급결제의 품질시험방법은 단순히 급결제의 품질만을 확인하기 위해서는 많은 변수들이 존재하고 있다. 또한 현재까지 생산된 급결제 제품들은 실내시험에서는 거의 대부분 품질기준에 만족하지는 못하지만 현장에서 급결제가 숏크리트에 혼합되어 슈팅된 후의 품질은 상당히 만족하는 수준의 제품들이 다수이다. 즉 실내 시험을 통해 도출한 결과를 바탕으로 현장에 적합여부를 판단하기 위해서는 실내 시험과 실제 타설 시의 품질의 연관성을 확인하고 그에 맞는 시험방법을 찾아야 한다고 본다. 따라서 본 연구는 급결제와 숏크리트의 재료의 조건을 다양하게 하여 길모어침에 의한 시험결과와 압축강도를 비교하여 KS F2782(숏크리트용 급결제) 규격은 급결제의 품질을 확인하기 위한방법으로서 적합성에 대하여 분석하고자 한다. 그 결과로서 KS F 2782규격의 일부만 수정을 한다고 해서 해결될 수 있는 문제점은 아니며 전반적으로 처음부터 철저하게 검토를 하여 국내 현실에 적합하고 실내 시험의 균일성이 보장되면서 현장에 적용 시 충분한 연관성이 있는 보완책이 마련되어야 한다.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.210-223
• /
• 1999

An efficient management of product information is critical to the enhancement of corporate competitiveness. Product information is often distributed in term of organization, geography, and time. With the rapid increase in the use of Internet or its associated Web and intranets, it has been accelerating to integrate the distributed information. In this research, a Distributed, Open, Intelligent Product data Management system, namely DOI-PDM, is developed. This system deals with product information following the STEP standard, and its operation is controlled by a Web-based workflow management system. CORBA is employed to ensure interoperability among distributed objects. It is intended to achieve openness by using various standards, such s STEP, KQML, SGML, and WfMC specifications. One major difficulty in managing it needs also be properly modified according to the dynamics. It however is very hard to have a prior anticipation to the dynamics. It however is very hard to have a prior anticipation to the modification requirements in practice. We introduce a process adaptation model and a use of intelligent agent technology. An agent is delegated to modify process definitions during run-time. A method of agent implementation and a proper communication scheme among te agents are proposed. Also developed in this research is a STEP-based content search system which can co-work with the agents by providing relevant product information that the agents require.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.267-272
• /
• 2021

본 연구는 최근 증가하고 있는 건축물의 다양한 외벽 형상에 따라 적용이 가능한 비정형 건축물에의 적용을 위해 3D 프린팅 기법을 적용한 외장재의 제조를 위한 기초 연구로서 진행하였다. 3D 프린팅 외장재의 출력성과 적층성의 확보를 위하여 3D 프린팅 콘크리트를 몰드에 타설한 시험체와 급결제를 사용한 출력물 시험체의 단위중량과 강도특성을 분석하였다. 몰드에 타설한 콘크리트의 단위중량에 비하여 급결제를 사용한 3D 프린팅 콘크리트의 단위중량이 3.5%~5.0% 정도 감소하는 경향을 나타내었고, 압축강도는 몰드에 타설한 콘크리트의 압축강도에 비하여 3D 프린팅을 통한 출력물의 압축강도는 36%~46%정도 감소하는 경향을 나타냈다. 휨강도의 경우 몰드에 타설한 콘크리트의 압축강도에 비하여 3D 프린팅을 통한 출력물의 압축강도는 36%~46%정도 감소하는 경향을 나타냈다. 급결제를 사용한 3D 프린팅 콘크리트의 강도 특성에 관한 영향은 2.0~5.8%정도 감소하는 경향을 나타냈다. 따라서, 3D 프린팅 출력시 급결제의 사용에 따른 강도 특성에 영향은 출력에 의한 강도 특성의 감소 보다 적은 것으로 나타나 3D 프린팅 외장재 제조시 급결제의 사용이 가능한 것으로 판단된다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.1-9
• /
• 2017

PURPOSES : The objective of this study is to develop an optimized method of mix design for rapid-set lightweight-formed mortar mix. To achieve this objective, the workability, setting time, and compressive strength of mixes under various conditions of mix design were evaluated. METHODS : The water-bonder ratio, fly-ash substitution ratio, and forming agent injection amount were selected as design variables in the study. The fluidity, setting time, density, and strength of the mortar mix were considered as major evaluation criteria of the mixture, and were subsequently utilized to evaluate the characteristics of the mortar mix under various conditions. RESULTS : The observations made from the mix design process are as follows: 1) the air content and fluidity increase as the forming agent ratio and forming agent ratio increase, respectively; 2) the maximum air content is approximately 20%; 3) the accelerating agent decreases the fluidity of the mortar mix by 15% on average; 4) the forming agent injection ratio and fly-ash substitution ratio yield significant effects on the initial and final set times of the mortar mix; 5) as the forming agent injection ratio and fly-ash substitution ratio increase, the compressive strength of the mortar mix decreases; and 6) the 28-day compressive strengths of the forming agent injection ratio and fly-ash substitution ratio yield the most significant effects. CONCLUSIONS : It is concluded that the governing design variables for the rapid-set lightweight-formed mortar mix are the forming agent injection ratio and fly-ash substitution ratio.