• 폴리머
• /
• 제32권5호
• /
• pp.440-445
• /
• 2008

정수압 상태의 선형저밀도 폴리에틸렌 튜빙의 파손 메커니즘과 파손 모폴로지를 연구하였다. 비디오현미경과 주사전자현미경을 이용한 관찰 결과, 선형저밀도 폴리에틸렌 튜빙의 파손모드는 내면에서 외면으로 진전되는 크랙을 수반하는 취성파괴임을 확인하였다. 또한 산화유발시간과 적외선분광분석을 통하여, 파손된 선형저밀도 플리에틸렌 튜빙의 단면상에 열화에 의한 발열 피크와 카르보닐 피크의 증가를 관찰하였다. 열 가속에 의한 음력과 수명특성 사이의 관계를 고려한 선형저밀도 폴리에틸렌 튜빙의 가속수명시험법 및 시험장치를 개발하였다. 선형저밀도 폴리에틸렌 튜빙의 장기 정수압 상태의 수명을 예측하기 위해 아레니우스 모델과 와이블 분포를 적용한 통계학적 기법을 도입하였다. 그 결과, 사용온도 $25^{\circ}C$에서의 선형저밀도 폴리에틸렌 튜빙의 장기수명을 평가/분석하였다.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.797-818
• /
• 2022

Steel-precast ultra-high-performance concrete (UHPC) composite beams with demountable high-strength friction-grip bolt (HSFGB) shear connectors can be used for accelerated bridge construction (ABC) and achieve excellent structural performance, which is expected to be dismantled and recycled at the end of the service life. However, no investigation focuses on the demountability and reusability of such composite beams, as well as the installation difficulties during construction. To address this issue, this study conducted twelve push-out tests to investigate the effects of assembly condition, bolt grade, bolt-hole clearance, infilling grout and pretension on the crack pattern, failure mode, load-slip/uplift relationship, and the structural performance in terms of ultimate shear strength, friction resistance, shear stiffness and slip capacity. The experimental results demonstrated that the presented composite beams exhibited favorable demountability and reusability, in which no significant reduction in strength (less than 3%) and stiffness (less than 5%), but a slight improvement in ductility was observed for the reassembled specimens. Employing oversized preformed holes could ease the fabrication and installation process, yet led to a considerable degradation in both strength and stiffness. With filling the oversized holes with grout, an effective enhancement of the strength and stiffness can be achieved, while causing a difficulty in the demounting of shear connectors. On the basis of the experimental results, more accurate formulations, which considered the effect of bolt-hole clearance, were proposed to predict the shear strength as well as the load-slip relationship of HSFGBs in steel-precast UHPC composite beams.

• Advances in concrete construction
• /
• 제10권1호
• /
• pp.61-69
• /
• 2020

This paper looks into how the shape of headed bars may influence the durability of reinforced concrete structures. Nowadays the only heads used in site works are cylindrical in shape. An alternative shape of head is studied in this piece of work. The new head reduces the concentration of stresses and so the appearance of cracks. In this work durability is studied based on both, first cracking and failure mode. An experimental campaign of 12 specimens and finite element modelling are described. The specimens were subjected to an accelerated corrosion process using an electrical current supply. Direct current was impressed on the specimens until breaking. Test results and the results obtained from numerical models are presented. Results are presented in term of comparison between the two shapes of heads studied. It was shown that the shape of the head has a significant influence on durability of reinforced concrete structures with headed reinforcing bars.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.449-452
• /
• 2006

본 논문에서는 전장부품에서 중요한 연결 장치인 커넥터의 고장 모드를 분석하기 위한 방법으로 HALT(Highly Accelerated Life Test)를 이용해 관측된 고장 데이터를 기반으로 ReliaSoft사의 소프트웨어인 ALTA PRO를 이용하여 분석하고자 한다. 커넥터를 이루는 주재료는 플라스틱과 금속으로 구성되어 있어 습도에 대한 반응 보다 열 변화와 진동에 의해 고장이 발생 한다. 이러한 커넥터의 특성을 고려하여 HALT는 온도와 진동 스트레스를 이용한 복합 스트레스 시험을 실시하였다. HALT에 사용된 시료는 20핀 커넥터 5개로 74시간 동안 시험하였으며, 9개의 핀에서 부러지는 고장이 관측 되었다. 관측된 고장 데이터를 단일 스트레스에 의한 고장으로 분석하기위해 시험에 사용된 온도와 진동 스트레스를 개별 스트레스로 하여 ALTA PRO를 이용하여 분석하였다. 분석을 위한 수명-스트레스관계식은 스텝 스트레스에 적합한 Cumulative Damage 선택하였으며 Likelihood Function을 이용 최적 분포는 Weibull 분포임을 확인하였다, ALTA Pro를 이용한 분석 결과 열에 대한 Mean Life는 2444.03 시간이며, 진동에 대한 Mean Life는 1784.27시간으로 진동에 대한 Mean Life가 659.76 시간만큼 작은 것을 확인 하였다. 고장 데이터를 이용한 수명 예측에서 Mean Life가 작다는 것은 스트레스에 의해 고장이 빠르게 발생 했다는 것을 의미한다. 가속수명시험을 통해 관측된 커넥터의 고장은 핀이 부러지는 현상이며, 고장에 대한 주요 원인으로 온도 스트레스 보다 Mean Life가 낮은 진동 스트레스인 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.341-349
• /
• 2001

Dental caries is the most common oral disease. There are many factors contributing to its development, but complete understanding and prevention are not fully known. However, it is possible to remineralize the early enamel curious lesion by fluoride containing remineralization solution. Recently the pH-cycling model has been used to examine the effect of fluoride solution on remineralization of artificial caries in vitro as it can closely simulate the conditions encountered in vivo within a carefully controlled environment. The aim of this study was to evaluate the remineralizing effects of supersaturated buffer solutions under pH-cycling model. The specimen with 3mm-diameter was made using mature bovine incisors which has no caries and has sound enamel surface. Early curious lesions were produced by suspending each specimens into demineralization solution at pH 5.0 for 33 hours and the specimen whose surface hardness value ranged from 25 to 45 VHN were used. The pH cycling treatment regimen consisted of 5 min soaks of three treatment solutions four times per days for 15 days and the continuous cycling of demineralization and remineralization were carried out for 15 days. Following the pH-cycling treatment regimen, the specimens' surface microhardness were measured by the Vickers hardness test (VHN) and analyzed by ANOVA and Duncan's multiple-range test. 1. The surface microhardness value of supersaturated solution, Senstime, and Gagline groups were increased after pH cycling, and that of supersaturated solution was significantly Increased compared to saline group(P<0.05). 2. The surface remineralization effect of fluoride containing solutions was accelerated by saliva under pH-cycling mode 3. The pH cycling model was considered appropriate to mimic the intra-oral pH changes when evaluating demineralization and remineralization in vitro. Under the results of above study, salivary remineralization effect can be improved by fluoride containing remineralization solution. The pH-cycling model was considered appropriate to mimic the intra-oral pH changes when evaluating demineralization and remineralization in vitro.

• Steel and Composite Structures
• /
• 제48권1호
• /
• pp.27-41
• /
• 2023

Under the long-term effect of corrosive environment, many cold-formed steel (CFS) structures have serious corrosion problems. Corrosion leads to the change of surface morphology and the loss of section thickness, which results in the change of instability mode and failure mechanism of CFS structure. This paper mainly investigates the elastic local buckling behavior of corroded CFS columns. The surface morphology scanning test was carried out for eight CFS columns accelerated corrosion by the outdoor periodic spray test. The thin shell finite element (FE) eigen-buckling analysis was also carried out to reveal the influence of corrosion surface characteristics, corrosion depth, corrosion location and corrosion area on the elastic local buckling behaviour of the plates with four simply supported edges. The accuracy of the proposed formulas for calculating the elastic local buckling stress of the corroded plates and columns was assessed through extensive parameter studies. The results indicated that for the plates considering corrosion surface characteristics, the maximum deformation area of local buckling was located at the plates with the minimum average section area. For the plates with localized corrosion, the main buckling shape of the plates changed from one half-wave to two half-wave with the increase in corrosion area length. The elastic local buckling stress decreased gradually with the increase in corrosion area width and length. In addition, the elastic local buckling stress decreased slowly when corrosion area thickness was relatively large, and then tends to accelerate with the reduction in corrosion area thickness. The distance from the corrosion area to the transverse and longitudinal centerline of the plate had little effect on the elastic local buckling stress. Finally, the calculation formula of the elastic local buckling stress of the corroded plates and CFS columns was proposed.

• 디지털콘텐츠학회 논문지
• /
• 제16권1호
• /
• pp.63-70
• /
• 2015

본 연구는 PACS의 영상저장부의 디스크 배열에 들어가는 하드디스크의 수명을 제조회사의 가속 수명시험 결과로 예측하고자 하였다. $50^{\circ}C$, $60^{\circ}C$의 고장시간 데이터로 Anderson-Darling 적합도 검증을 진행하여 와이블 분포를 채택하였다. 형상모수와 척도모수로 동일성 검증을 진행한 결과, 가속 수명 시험 $50^{\circ}C$ 조건과 가속 수명 시험 $60^{\circ}C$ 조건의 확률분포가 통계적으로 유의하지 않았다. 온도 가속인자를 포함한 와이블-아레니우스 모형으로부터 추정한 형상모수는 1.0409이며, 사용조건($30^{\circ}C$)의 특성수명은 24603.5 시간이었다. 또한 아레니우스 모델 식에 반영하여 활성화 에너지 0.5011 eV을 산출하였다. 그리고 가속시험의 정확성 확보차원에서 가속시험 불량시료와 시장 반품 시료로 고장 분석을 진행한 결과, 불량 모드별 점유율의 세부 차이는 있으나, 점유율 순서는 일치 하였다. 본 연구는 PACS 환경 하에서 하드디스크의 가속시험절차를 제안하며, 제조자와 사용자간에 수명예측에 도움을 주고자 한다.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.51-56
• /
• 2015

솔더 조인트의 신뢰성 강화를 위해서 다양한 pad finish material이 사용되고 있으며, 최근에는 Electroless Ni Electroless Pd Immersion Gold (이하 ENEPIG) pad가 많이 사용되고 있다. 따라서, 본 연구는 상용화 되어 사용중인 Electrolytic Ni (soft Ni) pad와 최근 이슈가 되고 있는 ENEPIG pad에 대한 신뢰성 평가에 관한 것으로, 다양한 Cu 함량에 따른 거동을 관찰 하였다. Reflow 후 솔더와 pad간의 접합층은 $Cu_6Sn_5$에 Ni이 치환된 형태의 금속간 화합물로 구성되어 있었으며, ENEPIG pad의 경우, 접합층과 Ni layer 사이에 $Ni_3P$ (dark layer) layer가 관찰 되었다. 또한, Cu 함량에 따라 Dark layer의 두께를 제어할 수 있었다. 충격 낙하 시험 후, 파괴모드를 관찰한 결과 soft Ni pad와 ENEPIG pad에서 서로 다른 파괴모드가 관찰 되었으며, soft Ni의 경우, 1차 IMC와 2차 IMC 경계에서 파괴가 관찰 되었고, ENEPIG pad의 경우, dark layer에서 파괴가 관찰 되었다. IMC와 pad material, bulk 솔더와의 lattice mismatch에 의해 불안정한 계면이 존재하며, 이는 연속적인 외부 충격에 의해 가해진 열적, 물리적 스트레스를 IMC 계면으로 전송하기 때문에, 솔더의 신뢰성 향상을 위해서는 솔더 벌크의 제어와 IMC의 두께 및 형상의 제어는 필요하다.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.236-242
• /
• 1989

본 연구에서는 주로 보일러의 과열기 및 재열기등의 관재료로 널리 사용되고 있는 304 스테인레스강에 대하여 실제 고온부식현상을 재현한 부식환경하인 630.deg. C, 690.deg. C 및 750.deg. C 3가지 온도범위에서 크리프시험을 실시하고 고온부식이 크리프파단 특성에 미치는 영향을 부식조건이 없는 고온대기중의 실험결과와 비교 검토하였다.

• Smart Structures and Systems
• /
• 제12권2호
• /
• pp.97-119
• /
• 2013

This paper presents numerical and experimental results on the use of guided waves for structural health monitoring (SHM) of crack growth during a fatigue test in a thick steel plate used for civil engineering application. Numerical simulation, analytical modeling, and experimental tests are used to prove that piezoelectric wafer active sensor (PWAS) can perform active SHM using guided wave pitch-catch method and passive SHM using acoustic emission (AE). AE simulation was performed with the multi-physic FEM (MP-FEM) approach. The MP-FEM approach permits that the output variables to be expressed directly in electric terms while the two-ways electromechanical conversion is done internally in the MP-FEM formulation. The AE event was simulated as a pulse of defined duration and amplitude. The electrical signal measured at a PWAS receiver was simulated. Experimental tests were performed with PWAS transducers acting as passive receivers of AE signals. An AE source was simulated using 0.5-mm pencil lead breaks. The PWAS transducers were able to pick up AE signal with good strength. Subsequently, PWAS transducers and traditional AE transducer were applied to a 12.7-mm CT specimen subjected to accelerated fatigue testing. Active sensing in pitch catch mode on the CT specimen was applied between the PWAS transducers pairs. Damage indexes were calculated and correlated with actual crack growth. The paper finishes with conclusions and suggestions for further work.