Browse > Article
http://dx.doi.org/10.12989/acc.2020.10.1.061

Influence of the shape of head anchors on the durability of reinforced concrete elements  

Martinez-Echeverria, M. Jose (Department of Construction Engineering and Engineering Projects, University of Granada (UGR), Campus Universitario de Fuentenueva)
Gil-Martin, Luisa Maria (Department of Structural Mechanics, University of Granada (UGR). Campus Universitario de Fuentenueva)
Montero, Jose Rodriguez (Department of Construction Engineering and Engineering Projects, University of Granada (UGR), Campus Universitario de Fuentenueva)
Hernandez-Montes, Enrique (Department of Structural Mechanics, University of Granada (UGR). Campus Universitario de Fuentenueva)
Publication Information
Advances in concrete construction / v.10, no.1, 2020 , pp. 61-69 More about this Journal
Abstract
This paper looks into how the shape of headed bars may influence the durability of reinforced concrete structures. Nowadays the only heads used in site works are cylindrical in shape. An alternative shape of head is studied in this piece of work. The new head reduces the concentration of stresses and so the appearance of cracks. In this work durability is studied based on both, first cracking and failure mode. An experimental campaign of 12 specimens and finite element modelling are described. The specimens were subjected to an accelerated corrosion process using an electrical current supply. Direct current was impressed on the specimens until breaking. Test results and the results obtained from numerical models are presented. Results are presented in term of comparison between the two shapes of heads studied. It was shown that the shape of the head has a significant influence on durability of reinforced concrete structures with headed reinforcing bars.
Keywords
headed bars; shape of the heads; durability; anchorage;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Eurocode 2 (2013), Design of Concrete Structures. Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
2 Fang, C., Lundgren, K., Chen, L. and Zhu, C. (2004), "Corrosion influence on bond in reinforced concrete", Cement Concrete Res., 34(11), 2159-2167. https://doi.org/10.1016/j.cemconres.2004.04.006.   DOI
3 Furche, J. and Eligehausen, R. (1991), Lateral Blow-out Failure of Headed Studs Near a Free Edge, ACI Special Publications (ACI SP-130), Stuttgart, Germany, pp. 235-252. http://dx.doi.org/10.18419/opus-432.
4 Ghojel, J. (2004), "Experimental and analytical technique for estimating interface thermal conductance in composite structural elements under simulated fire conditions", Exp. Therm. Fluid Sci., 28(4), 347-354. https://doi.org/10.1016/S0894-1777(03)00113-4.   DOI
5 Gil-Martin, L.M. and Hernandez-Montes, E. (2019), "Reinforcement anchored in tension by heads. Review of capacity formulation and applicability limits", Eng. Struct., 184, 186-193. https://doi.org/10.1016/j.engstruct.2019.01.063.   DOI
6 Hawkins, N.M. (1968), "The bearing strength of concrete loaded through rigid plates", Mag. Concrete Res., 20(62), 31-40. https://doi.org/10.1680/macr.1968.20.62.31.   DOI
7 Ibrahim, M.A., Sharkawi, A.E.M., El-Attar, M.M. and Hodhod, O.A. (2018), "Assessing the corrosion performance for concrete mixtures made of blended cements", Constr. Build. Mater., 168, 21-30. https://doi.org/10.1016/j.conbuildmat.2018.02.089.   DOI
8 Imperatore, S., Leonardi, A. and Rinaldi, Z. (2012), Mechanical Behaviour of Corroded Rebars in Reinforced Concrete Elements, Springer, Berlin, Heidelberg, Germany, 61, 207-220. https://doi.org/10.1007/978-3-642-24638-8_13.
9 Jebara, K., Ozbolt, J. and Hofmann, J. (2016), "Pryout failure of single headed stud anchor: 3D numerical FE analysis", Mater. Struct., 49(11), 4551-4563. https://doi.org/10.1617/s11527-016-0806-8.   DOI
10 Kim, K.H., Jang, S.Y., Jang, B.S. and Oh, B.H. (2010), "Modeling mechanical behavior of reinforced concrete due to corrosion of steel bar", ACI Mater. J., 107(2), 106-113.
11 Mehta, K. and Burrows, R. (2001), "Building durable structures in the 21st century", Concrete Int., 23(3), 57-63.
12 Lee, H.S., Noguchi, T. and Tomosawa, F. (2002), "Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion", Cement Concrete Res., 32(8), 1313-1318. https://doi.org/10.1016/S0008-8846(02)00783-4.   DOI
13 Lu, C., Jin, W. and Liu, R. (2011), "Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures", Corros. Sci., 53(4), 1337-1347. https://doi.org/10.1016/j.corsci.2010.12.026.   DOI
14 Malerba, P.G., Sgambi, L., Ielmini, D. and Gotti, G. (2017), "Influence of corrosive phenomena on bearing capacity of RC and PC beams", Adv. Concrete Constr., 5(2), 117-143. https://doi.org/10.12989/acc.2017.5.2.117.   DOI
15 Malumbela, G., Moyo, P. and Alexander, M. (2012), "A step towards standardising accelerated corrosion tests on laboratory reinforced concrete specimens", J. S. Afr. Inst. Civil Eng., 54(2), 78-85. http://hdl.handle.net/11427/27644.
16 Mangat, P.S. and Elgarf, M.S. (1999), "Bond characteristics of corroding reinforcement in concrete beams", Mater. Struct., 32(2), 89-97. https://doi.org/10.1007/BF02479434.   DOI
17 Ouglova, A., Berthaud, Y., Francois, M. and Foct, F. (2006), "Mechanical properties of an iron oxide formed by corrosion in reinforced concrete structures", Corros, Sci., 48(12), 3988-4000. https://doi.org/10.1016/j.corsci.2006.03.007.   DOI
18 Reinhardt, H.W., Blaauwendraad, J. and Vos, E. (1984), "Prediction of bond between steel and concrete by numerical analysis", Mater. Constr., 17(4), 311-320. https://doi.org/10.1007/BF02479089.   DOI
19 Thompson, M.K., Jirsa, J.O., Breen, J.E. and Klingner, R.E. (2002), "Anchorage Behavior of Headed Reinforcement: Literature Review", FHWA/TX-0-1855-1, Research Report 1855-1, 00970589.
20 UNE 36068:2011 (2011), Ribbed Bars of Weldable Steel for the Reinforcement of Concrete.
21 UNE-EN 10083-1:2008 (2008), Steels for Quenching and Tempering - Part 1: General Technical Delivery Conditions.
22 Willam, K.J. (1975), "Constitutive model for the triaxial behaviour of concrete", Proceedings of the International Association for Bridge and Structural Engineering, Bergamo, Italy, 19, 174-179.
23 Zhang, W., Chen, J. and Luo, X. (2019), "Effects of impressed current density on corrosion induced cracking of concrete cover", Constr. Build. Mater., 204, 213-223. https://doi.org/10.1016/j.conbuildmat.2019.01.230.   DOI
24 Chernin, L., Dimitri, V.V. and Volokh, K.Y. (2010), "Analytical modelling of concrete cover cracking caused by corrosion of reinforcement", Mater. Struct., 43, 543-556. https://doi.org/10.1617/s11527-009-9510-2.   DOI
25 Zhao, Y., Hu, B., Yu, J. and Jin, W. (2011) "Non-uniform distribution of rust layer around steel bar in concrete", Corros. Sci., 53(12), 4300-4308. https://doi.org/10.1016/j.corsci.2011.08.045.   DOI
26 Zhou, X., Tu, X., Chen, A. and Wang, Y.. (2019), "Numerical simulation approach for structural capacity of corroded reinforced concrete bridge", Adv. Concrete Constr., 7(1), 11-22. https://doi.org/10.12989/acc.2019.7.1.011.   DOI
27 ACI 318 (2019), Building Code Requirements for Structural Concrete and Commentary. Detroit: American Concrete Institute, ACI, Farmington Hills, MI, USA.
28 Auyeung, Y. (2001), "Bond properties of corroded reinforcement with and without confinement", Ph.D. Dissertation, The State University of New Jersey, New Brunswick
29 Ayinde, O.O., Zuo, X.B. and Yin, G.J. (2019), "Numerical analysis of concrete degradation due to chloride-induced steel corrosion", Adv. Concrete Constr., 7(4), 203-210. https://doi.org/10.12989/acc.2019.7.4.203.   DOI
30 Bashandy, T.R. (1996), "Application of headed bars in concrete members", Ph.D. Dissertation, University of Texas, Austin.
31 Coccia, S., Imperatore, S. and Rinaldi, Z. (2016), "Influence of corrosion on the bond strength of steel rebars in concrete", Mater. Struct., 49, 537-551. https://doi.org/10.1617/s11527-014-0518-x.   DOI
32 Delhomme, F., Roure, T., Arrieta, B. and Limam, A. (2016), "Pullout behavior of cast-in-place headed and bonded anchors with different embedment depths", Mater Struct., 49(5), 1843-1859. https://doi.org/10.1617/s11527-015-0616-4.   DOI
33 DeVries, R. (1996), "Anchorage of headed reinforcement in concrete", Ph.D. Dissertation, University of Texas, Austin.
34 El-Maaddawy, T.A. and Soudki, K.A. (2003), "Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete", J. Mater. Civil Eng., 15(1), 41-47. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(41).   DOI
35 Eurocode 2 (2009), Design of fastening for use in concrete. Part4-2: Headed Fasteners, European Committee for Standardization; Brussels, Belgium.