• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.273-281
• /
• 2010

본 논문은 교정가속수명시험법을 이용하여 액슬구동축의 피로수명을 예측하는 법을 제안한다. 교정가속 수명시험법은 수명예측, 시험시간 절감, 신뢰성 정량화시에 매우 효과적이다. 피로시험은 두 개의 고 부하 수준과 한 개의 저 부하 수준에서 수행되고, 외삽법을 사용하여 사용수준에서의 수명시간을 예측하게 된다. 본 논문에서는 수행시험 결과로부터 획득한 수명시간, 가속지수, 형상모수, 척도모수등과 같은 주요 신뢰성 인자들을 보여주고 있다. 액슬구동축의 수명예측은 부하스펙트럼 데이터와 시험데이터와의 비교 연구를 수행하여 검증하였다. 교정가속수명시험법을 사용한 수명예측법은 짧은 시간내에 수명을 예측하는데 매우 효과적인 방법임을 확인하였다.

• Carbon letters
• /
• 제28권
• /
• pp.9-15
• /
• 2018

In the aerospace field, Carbon/Cork composites have been used for rocket propulsion systems as a light weight structural component with a high bending stiffness and high thermal insulation properties. For the fabrication of a carbon composite with a heat insulation cork part, the bonding properties between them are very important to determine the service life of the Carbon/Cork composite structure. In this study, the changes in the interfacial adhesion and mechanical properties of Carbon/Cork composites under accelerated aging conditions were investigated. The accelerated aging experiments were performed with different temperatures and humidity conditions. The properties of the aged Carbon/Cork composites were evaluated mainly with the interfacial strength. Finally, the lifetime prediction of the Carbon/Cork composites was performed with the long-term property data under accelerated conditions.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권1호
• /
• pp.37-45
• /
• 2009

Recently mechanical watt-hour meters are being replaced by electronic watt-hour meters. The replacement period of mechanical watt-hour meters is 7 years. This period is based on long term historical data. The replacement period of electronic watt-meters is also 7 years. This period is determined using the replacement period of mechanical watt-hour meters. However lifetime of mechanical watt-hour meters is different from the lifetime of electronic meters. In order to determine desirable replacement period of electronic watt-hour meters, accelerated life tests of major components in electronic watt-hour meters were performed. The test results showed that LCD was the component which had the shortest lifetime. In this paper, lifetime of electronic watt-hour meters manufactured by 3 company was estimated and life test standard for LCD was developed.

• Journal of the Korean Data and Information Science Society
• /
• 제7권1호
• /
• pp.37-46
• /
• 1996

계단충격가속수명시험에서 얻은 자료를 토대로 통계적 추론을 위해 가정하는 수명분포에 대한 적합도 검정을 Kolmogorov-Smirnov, Cramer-von Mises, Anderson-Darling과 같은 비모수적 검정통계량들을 이용한 검정절차를 제안하고, 각 통계량들을 검정력 측면에서 비교하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.197-201
• /
• 2007

The accelerated aging test equipment which is possible to apply voltage and temperature at the same time, is fabricated to predict lifetime of high capacity thyristor in short time. The variations of the forward/reverse breakdown voltage and the leakage current are investigated as an aging diagnostic tool. Lifetimes of the devices which are predicted from the reverse breakdown voltage with an accelerated aging time, have shown 3-15 years.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.91-97
• /
• 1988

In accelerated life testing, a relationship is usually assumed between the stress and a parameter of the lifetime distribution. However, the true relationship is not usually known, and therefore, the experimenter may wish to provide protections against the likely departures from the assumed relationship. This paper considers an accelerated life test in which two stress levels are involved, and the lifetime of each test item at a stress level is assumed to have an independent, identical, exponential distribution. For the case where a first order relationship is assumed while the true one is quadratic, a procedure is developed for allocating test items to stress levels such that the bias and/or the variance of the estimated(log-transformed) mean lifetime at the use condition is minimized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1945-1947
• /
• 2005

This study considers find out best accelerated life testing and lifetime prediction of electrolytic capacitors. We proved about relation between failure and deterioration mechanism from last thesis. Beside we performed test that temperature and voltage press higher than allowance specification. Failure distribution acquired from those test. And wiebull function and Minitab program applied to accelerated constant and lifetime by means of calculation. At the result, goodness of fit affect to weibull function and acceleration factor therefore fitting is important factor in reliability testing.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.129-137
• /
• 2004

This paper presents an accelerated life test for burnout of tungsten filament of incandescent lamp. From failure analyses of field samples, it is shown that their root causes are local heating or hot sports in the filament caused by tungsten evaporation and wire sag. Finite element analysis is performed to evaluate the effect of vibration and impact for burnout, but any points of stress concentration or structural weakness are not found in the sample. To estimate the burnout life of lamp, an accelerated life test is planned by using quality function deployment and fractional factorial design, where voltage, vibration, and temperature are selected as accelerating variables. We assumed that Weibull lifetime distribution and a generalized linear model of life-stress relationship hold through goodness of fit test and test for common shape parameter of the distribution. Using accelerated life testing software, we estimated the common shape parameter of Weibull distribution, life-stress relationship, and accelerating factor.

• 대한산업공학회지
• /
• 제24권3호
• /
• pp.367-379
• /
• 1998

This paper considers two modes of partially accelerated life tests for items having Weibull lifetime distributions. In a use-to-acclerated mode each item is first run at use condition and, if it does not fail for a specified time, then it is run at accelerated condition until a predetermined censoring time. In an accelerated-to-use mode each one is first run at accelerated condition and, if it does not fail for a specified time, then it is run at use condition. Maximum likelihood estimators of the parameters of the lifetime distribution at use condition, and the 'acceleration factor' are obtained. The stress change time for each mode is determined to minimize the asymptotic variance of the acceleration factor, and the two modes are compared. For selected values of the design parameters the optimum plans are obtained, and the effects of the incorrect pre-estimates of the design parameters are investigated. Minimizing the generalized asymptotic variance of the estimators of the model parameters is also considered as an optimality criterion.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.257-258
• /
• 2008

Hall-type current sensors have been widely used in many fields such as elevator and train system. To estimate lifetime of hall-type current sensors, an accelerated life test with real-time monitoring system simultaneously was designed and performed in high temperature environment with three different temperatures. From the experimental results, activation energy was about 0.9 eV, and acceleration factor was about 450 based on Arrhenius model. As a results, $B_{10}$ lifetime of hall-type current sensor is estimated to be 65,460 hours.