• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.358-367
• /
• 2017

The purpose of this study was to evaluate the influence of water infiltration and flexural strength changes in dental porcelain with glazing treatment. The block specimens were prepared as experimental materials, using feldspar type commercial dental porcelain; then, these were fired at $940^{\circ}C$ for 1 minute. The fired specimens were polished with a dimension of $40{\times}5.5{\times}5mm$. The specimens were distributed to two experimental groups: with and without glazing treatment specimens (n=5), and they were immersed in a solution of pH 7 for 3, 7, and 20 days at $40^{\circ}C$ after fabrication. To evaluate the flexural strength changes with water infiltration treatment in specimens with and without glazing, the 3-point flexural test was performed, using a universal testing machine until failure occurred. Starting powder and fired specimens consisted of amorphous and leucite crystalline phase. The Vickers hardness of fired specimens was more than 1.6 times higher than that of the enamel of natural teeth. According to porosimeter results, the specimens without glazing treatment exhibited a porosity of about 14.7%, whereas the glazed specimens exhibited the lowest porosity at about 1.1%. The average flexural strength of glazed specimens was higher than the flexural strength of specimens without glazing treatment (p<0.05). The flexural strength of all specimens with and without glazing treatment deteriorated with accelerated aging in the solution. In addition, significant differences between these two treatment groups were observed in all of the specimens treated at various water infiltration periods (p<0.05). The exposure of internal pores and micro-cracks in the surface due to polishing of the fired specimens influenced mechanical behaviors. Especially, the flexural strength in specimens without glazing treatment has shown significant degradation with the infiltration of water. Therefore, this study suggests that glazing processes can improve mechanical properties of dental porcelain.

• Health Policy and Management
• /
• v.24 no.1
• /
• pp.56-70
• /
• 2014

Background: Korea shows rapid population aging and increase in healthcare service use and expenditure. Also, this would be accelerated because of the baby boomers who will be 65 years old and more in 2020. Chronic disease is another reason that increases the use of healthcare service and expenditure of the middle- and old-aged households. Catastrophic health expenditure (CHE) is the index which can indicate the households' burden of health spending. Despite the importance, there are few studies on CHE of middle- and old-aged households and especially no panel study yet. This is the reason that this study is carried out. Methods: This study used 3-year data from the Korea Welfare Panel Study conducted from 2009 to 2011. We defined CHE if a household's health expenditure is equal or greater than the threshold value if income remaining after subsistence needs has been met. We used 4 different threshold values which are 10%, 20%, 30%, and 40%. In order to look at the households which experienced CHE, we conducted panel logit analysis after correspondence analysis and conditional transition probability analysis. Results: This study showed three notable results. First, there has been a difference among age groups, which implies that the older people are, the more easily they can experience CHE. Second, the households with no private insurance are shown to have a higher CHE occurrence rate. Lastly, there has been a significant difference among the kinds of chronic diseases. The households which have cancer, cerebrovascular disease, and heart disease have a higher CHE occurrence rate. However, the households with diabetes have no significant effects to CHE occurrence. Also, hypertension has a negative effect to the occurrence. Conclusion: With the results, it can be implied that elderly people with chronic disease are more needed in medical coverage and healthcare. Also, private insurance can play its role in protecting households from CHE. Therefore, it needs to conduct studies on CHE especially about different age groups, private insurance, and chronic disease.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.419-427
• /
• 2018

The purpose of this study is to recycle steel slag generated from the iron producing process and to use steel slag as a construction material which is currently landfilled Steel slag is subjected to aging treatment due to the problem of expansion and collapse when it reacts with water. The Slag Atomizing Technology (SAT) method developed to solve these problems of expanding collapse of steel slag. In this study, experimental study on the emergency repair mortar using the reducing slag, electric arc furnace slag and silicon manganese slag manufactured by the SAT method is Reduced slag was shown an accelerated hydration when it was replaced with rapidly-setting cement, and the rate of substitution was equivalent to 15%. It is shown that the electric furnace oxide slag is equivalent to 100% of the natural aggregate, and it can be replaced by 15-30% when the silicon manganic slag is substituted for the electric furnace oxide slag. With the above formulation, it was possible to design the rapidly repair mortar for road use. These recycling slags can contribute on achieving sustainability of construction industry by reducing the use of cement and natural aggregates and by reducing the generation of carbon dioxide and recycling waste slag.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.230-238
• /
• 2014

The purpose of this study was to develop the cost-effective and efficiency seed longevity prediction method of rice (Oryza sativa L.) germplasm for viability monitoring. To find an optimum predicting method for rice seed longevity at genebank, an accelerated ageing (AA) test, a controlled deterioration (CD) test and a dry-heat treatment (DHT) were conducted to the four groups of rice germplasm based on ecotype, such as Indica, Japonica, Javanica and Tongil type. Among the three artificial aging treatments, the dry-heat treatment of 36 hours at $90^{\circ}C$ is suggested as a routine predictive test method of rice germplasm longevity at a genebank. The distribution of germination rate on 3,066 accessions which conserved 26.5 years at $4^{\circ}C$ showed similar trend with the result of distribution by dry-heat treatment at $90^{\circ}C$ on 36 hours using 106 accessions of rice selected samples which composed four ecotype groups. The results show that the dry-heat treatment affect not only predicting the rice seed longevity but also determining effective interval for monitoring germination of rice germplasm in genebanks.

• The Journal of Korean Medicine
• /
• v.19 no.2
• /
• pp.373-390
• /
• 1998

35 theses conducted in Korea on the topic of senescence or anti-oxidant were classified on the basis of research methods, animals used for the experiments, and research items. Evaluating these research works with respect to the Free Radical Theory, the following conclusions were reached. 1. Of the 17 theses written in the Oriental medicine aspect, three theses used a single herb, nine theses used a complex prescription, four theses concentrated on the usage of the medicinal acupuncture, and one research paper focused on using scientific components. Common objection of these papers were on the verification of the efficacy of herbs. 2. Of the 18 these written in the Western medicine aspect, five theses used a single drug, seven theses conducted a research on the changes due to senescence, and 6 papers were on variety of topics. The main focus of these works were on the mechanism and pathology related to the senescence rather than on the suppression of senescence. 3. Among the theses written in the Oriental medicine perspective, a total of 48 herbs were utilized. 26 of these herbs has a tonification function on the Kidney. Six out of nine complex prescription mentioned above has a function of tonifying the Kidney. 4. With respect to the research subjects used on the experiments, 8 theses have used Senescence-Accelerated mice, 13 theses have used Sprague-Dawley mice, and remaining 7 papers have used human or other animals. 5. These are the categorization of the research items used: the weight (11) and weight changes of the visceral organs (9), the measurement of the content of peroxide-disease (9), the measurement of enzyme vitality (21), the blood and urine test (10), the experiment concerning immune system (3), the influence on the hepatic capability of metabolizing foreign substance (3), the effect on hepatic cell protection (3), the measurement of both the suppression of Free Radical and ability to create Free Radical (2), the measurement of effect of suppresing MDA(malondialdehyde) (4), the effect of eliminating DPPH Radical (2), and experiements about the functions (2). 6. The rate of vitalization of well known anti-oxidants such as Superoxide dismutase (SOD), Protein-bound SH, Nonprotein-bound SH, Glutathione(GSH), Catalase, and etc. were tested in 17 theses. Considering the conclusions mentioned above, the theses related to the senescence published in Korea elected different animals used for experiments, research items and the methods of research, the end result seems to be a lack of objectivity. Thus, I would argue that research methods to overcome such a deficiency need to be developed systematically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.5
• /
• pp.305-309
• /
• 2000

Ultra-drying [＜5.0% seed moisture content (SMC)] storage technique is a cost-effective storage method for oily seeds. To decide proper ultra-drying condition for soybean seeds, drying rate was compared three silica gel to seed ratios, two seed sizes with varietal difference, two kinds of container, and three seed amounts per container under :t 23$\pm$1$^{\circ}C$. When the relative humidity (RH) was reduced at the rate of less than 0.1 % a day, silica gel was replaced with dry one by 47 days. Higher silica gel to seed ratios (3:1 and 2:1) dried faster than lower ratio (1:1) until 28 days, but not after 43 days of drying. Also, large seeded variety was dried faster than small seeded variety. Kinds of container and seed amounts per container didn't show differences in drying of soybean seeds. After completion of ultra-drying, percentage germination by standard germination test (SGT) was not different among silica gel to seed ratios, kinds of container, and seed amounts per container, except among seed sizes (varieties). Before SGT, soybean seeds were premoistened using saturated ${CaCl}_2$ for 48 hours and ${NH}_4$Cl for 24 hours in desiccators. To compare germinability between ordinary-dried seeds and ultra-dried seeds, the seeds of seven soybean varieties, which were varying in size from 8.1 to 34.9 g per 100 seeds, were dried using same amount of silica gel under 23$\pm$1$^{\circ}C$. After completion of 76 days of drying, SMCs were reduced to 3.13-3.45% from 7.86-8.82%. SMC after completion of drying was not correlated with 100-seed weight (r=0.556). Before germination tests, soybean seeds were premoistened using saturated salt solutions. Percentage germination was higher with ultra-dried seeds than ordinary-dried seeds in SGT and higher with ordinary-dried seeds than ultra-dried seeds in AAT at the beginning of storage and after 6 months storage, but general trend of percentage germination was not observed among varieties classified by 100-seed weight. From these results, we concluded that further studies are needed to improve ultra-drying storage method for soybean seeds.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.122-129
• /
• 2019

The movement of deterioration agents such as a chloride ion, etc. in concrete varies with loading conditions and micro-structure developed by age effect. In this paper, the carbonation behavior by accelerated carbonation test is evaluated considering curing periods(28 days, 91 days, and 365 days) and loading conditions. Carbonation velocity coefficients are obtained referred to KS F 2584. In the control case without loading condition, carbonation velocity coefficient of 91 days decreases to 50.0 % level and that of 365 days decreases to 44.8 % level than that of 28 days curing condition. In 28 curing days, carbonation velocity coefficients changed level of 103.9 ~ 108.8 % in tensile region and 91.9~104.6 % in compressive region by loading conditions. Carbonation velocity coefficients in the 30 % and 60 % tensile loading case at 28 days decreases to 47.3 % and 52.5 % level compared to control case after 1 year. Furthermore, 45.8 % and 44.9 % level of carbonation velocity coefficients are evaluated for 30 % and 60 % compressive loading conditions compared to control case after 1 year. Carbonation velocity coefficient decreases in the 30 % compressive loading level due to effective pore compaction and it increases afterwards due to micro-cracking. In the tensile loading condition, unlike the behavior of compressive region, it linearly increases with increasing loading level.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.1
• /
• pp.27-36
• /
• 2022

Currently the population of rural areas in Korea continue to decline due to low birth rate, aging population, and migration. This phenomenon is accelerated over time. And as a result, there are some declining phenomenon in rural society. And it is same in the residential and basic living conditions of rural villages. The increase ratio of empty houses exacerbates the rural landscape, acts as a cause of crime and bring out various social and economic problems such as worsening settlement conditions and local slums. The study is carried out to prevent this phenomenon by investigating the architectural contents of empty houses in the village, surveyed residents and owners and finally analyzed and synthesized to make a plan to utilize empty houses in the village. This study was conducted from June to December 2021. The conclusions are followings: 1. The empty houses in Korea were 1,511 million in 2020, 8.2% of the total number of houses, whereas those in Jeollabuk-do were 95,412, 12.9% of those of houses, and those in Gimje-city, the subject of this study, were 5,944. It is up to 15.8%. In particular, empty houses in Hacheon village, the site of this study, accounted for the highest ratio, with 25% of the total number of houses. 2. To understand the utilization and improvement of empty houses, surveys and interviews were conducted to residents and owners of Hacheon village in Gimje, and most of the residents submit proposals that empty houses were not desirable in terms of village landscape and safety. The owners don't have intentions of selling or leasing them. They want to remodel them and rent for a specific period. 3. As the physical condition of the empty houses(9empty houses) 6 empty houses of them are good. 4 of them are in poor condition. 4. By synthesizing these contents, nine empty houses in Hacheon village will be remodeled as the space for those of rural start-up young people, smart farm area, community space and rental housings for rural returnees.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.93-101
• /
• 2022

RC Slab bridges in Korea account for more than 70% of the total bridges for more than 20 years of service. As the number of aging structures increases, the importance of safety diagnosis and maintenance of structures increases. For highway bridges, cracks are a main cause of deck deterioration, which is very closely related to the decrease in bridge durability and service life. In addition, the damage rate of expansion joints and bearings accounts for approximately 73% higher than that of major members. Therefore, this study defined damage scenarios combined with devices damages and deck deterioration. The stress distribution and maximum stress on the deck were then evaluated using design vehicle load and daily temperature gradient for single and combined damage scenarios. Furthermore, this study performed damage-spread analysis and predicted condition ratings according to a deck deterioration model generated from the inspection and diagnosis history data of cracks. The heterogeneous damages combined with the member damages of expansion joints and bearings increased the rate of crack area and damage spread, which accelerated the time to reach the condition rating of C. Therefore, damage to bridge members requires proper and prompt repair and replacement, and otherwise it can cause the damage to bridge deck and the spread of the damage.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.179-189
• /
• 2023

Korea's port development adjusts the completion time and size of port facilities according to the future port throughput. The current port development system, which is referred to as "throughput-linked port development (Trigger Rule)", has received positive evaluation for efficiently executing the limited port development budget. Recently concerns have been growing over deteriorating service levels in port facilities in Korea due to accelerated aging of terminal facilities. However, the current port development system does not possess any standard for assessing the level of service and utilizing development indicators. The purpose of this paper is to calculate the Port Service Index (PSI) by selecting indicators to measure the Level of Service (LOS) of ports and deriving weights between the indicators, so that the current "throughput-linked port development (Trigger Rule)" can be linked with the level of service. Based on the result of analysis on a variety of preceding studies, the ship waiting rate, berth productivity, ship turnaround time and ship productivity were selected as four indicators to constitute the Port Service Index. The AHP and entropy methodologies were used to derive weights for each of four indicators which were later combined to calculate the comprehensive weight. The calculation formula of the Port Service Index (PSI) was derived by using the aggregated weights of each indicator, based on which the LOS of domestic container and bulk terminals were evaluated and this measurement result was divided into 6 classes to define each LOS. This paper contributes to draw the improvement measures for port development system that are able to connect the quantitative indicator of throughput, as well as a qualitative indicator of the level of "service".