• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1042-1044
• /
• 2003

The photoluminescence (PL) properties are studied for a new phosphor $BaZr(BO_{3})_{2}$ doped with $Eu^{3+}$ activator ion. The excitation spectrum shows strong absorption in the vacuum ultraviolet (VUV) region with an absorption band edge at 200 nm. The PL spectrum shows the strongest emission at 615 nm corresponding to the electric dipole $^{5}D_{0}\;{\rightarrow}\;^{7}F_{2}$ transition of $Eu^{3+}$, which results in a good color purity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.257-259
• /
• 2002

As a new host material for a red phosphor for PDP applications, has studied (Y,Gd)$Al_3(BO_3)_4$ which gives non-centrosymmetric sites for $Eu^{3+}$ activators. Vacuum ultraviolet (VUV) excitation spectrum of new red phosphor (Y,Gd)$Al_3(BO_3)_4$:$Eu^{3+}$ has two broad bands. One band with the absorption edge at ca. 168 nm is the band-gap absorption of aluminoborate and the other broad band centered 240 nm is the charge transfer transition between $Eu^{3+}$ and the neighboring oxygen anions. The PL spectrum shows the strongest emission at 617 nm due to the electric dipole $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$, whose luminescent chromaticity is (0.67, 0.33).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.187-189
• /
• 1994

The degree of the photodoping process in Ag(100 )/a-$Se_{75}Ge_{25}$(2000 ) films has been measured as a funcition of photon energy between 1.5eV and 2.9eV with the exposing time. The window of Ag occurs at 3400 (3.65eV) and Ag is almost transparent in this region. It was shown that transmitance is always constant (40∼50%) for the wavelength ranges of our experiment. It was found that the energy gap of a unexposed a-$Se_{75}Ge_{25}$ film is 1.81eV. Ag photodoping process result in the photodarkenting effect which the absorption edge shift to the large wavelength. Especially, we could obtain very large band shut ( ∼0.3eV) resulting in exposing He-Ne laser(6328[ ]). From the result of our experimental, we suggest that Ag photodoping process depends on the photon absorption in Ag.

• Applied Science and Convergence Technology
• /
• v.23 no.4
• /
• pp.179-186
• /
• 2014

Fluid model based numerical simulation was carried out for an inductively coupled plasma assisted sputter deposition system. Power absorption, electron temperature and density distribution was modeled with drift diffusion approximation. Effect of an electrically conducting substrate was analyzed and showed confined plasma below the substrate. Part of the plasma was leaked around the substrate edge. Comparison between the quasi-neutrality based compact model and Poisson equation resolved model showed more broadened profile in inductively coupled plasma power absorption than quasi-neutrality case, but very similar Ar ion number density profile. Electric potential was calculated to be in the range of 50 V between a Cr rod source and a conductive substrate. A new model including Cr sputtering by Ar+was developed and used in simulating Cr deposition process. Cr was modeled to be ionized by direct electron impact and showed narrower distribution than Ar ions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.149-149
• /
• 2011

CdS films were deposited on glass substrates by R.F. magnetron sputtering method and the films were annealed at various substrate temperatures ranging from room temperature to $300^{\circ}C$. Structural properties of the films were studied by X-ray diffraction analysis. The structural parameters as crystallite size have been evaluated. The crystallite sizes were found to increase, and the X-ray diffraction patterns were seen to sharpen by increasing substrate temperatures. X-ray diffraction patterns of these films indicated that they contain both cubic (zincblende) and hexagonal (wurtzite) structures as a mixture. Optical properties of the films were measured at room temperature by using UV/VIS spectrometer in the wavelength range of 190 to 1100nm and optical absorption coefficients were calculated using these data. The energy gap of the films was found to decrease, and the band edge sharpness of the optical absorption was seen to oscillate by annealing. The results show that heat treatments under optimal annealing condition can provide significant improvements in the properties of CdS thin films.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1388-1390
• /
• 2013

Macroporous $SnO_2$ foam was successfully synthesized via a simple soft-chemical route by hybridization between alkylamine and tin(IV) oxide. According to X-ray diffraction (XRD) analysis, the as-prepared $SnO_2$ foam had a highly ordered lamella structure along the crystallographic c-axis, which transformed to a rutile phase after thermal treatment at $300^{\circ}C$. X-ray absorption spectroscopy (XAS) at the Sn K-edge revealed that $SnO_2$ particles in the hybrid material maintained their nanosized structure after hybridization with alkylamine. Scanning electron microscope (SEM) images clearly showed that the as-prepared $SnO_2$ foam had a macroporous structure. This synthetic route can be extended to the development of open frameworks with good electrochemical properties in battery applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.374-374
• /
• 2010

Charge transfer mechanism of poly(4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (TP6F PI) which exhibits bistable ON and OFF switching has been studied using photoemission electron spectroscopy (PES) and near-edge x-ray absorption fine structure (NEXAFS). Here, we demonstrate novel set-up in which holes are injected by photoemission process instead of direct charge carrier injection via metal electrode. The accumulated charges on the PI surface in the OFF state abruptly flow across the PI film when the bias voltage of a back electrode reaches a specific value, indicating that the film is changed to the ON state. Core level and x-ray absorption spectra probed at charge injection region via photoemission process do not show any evidences implying structural modification of TP6F PI during the phase change. Whereas, in valence band spectra, the highest occupied molecular orbital (HOMO) is shifted toward Fermi level, responsible for improved hole-mobility of TP6F PI of ON state.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.295-295
• /
• 2012

The $TiO_2$ films were prepared in the $H_2SO_4$ solution containing $NH_4F$ at different anodic voltages, to compare the photocatalytic performances of titania for purification of waste water. The microstructure was characterized by a Field-emission scanning electron microscopy (FE-SEM) and X-ray diffractometry (XRD). Chemical bonding states and co-doped elements of F and N were analyzed using surface X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the co-doped $TiO_2$ films was analyzed by the degradation of aniline blue solution. From the result of diffuse reflectance absorption spectroscopy(DRS), it is indicated that the absorption edge of the F-N-codoped $TiO_2$ films shifted toward visible light area, and the photocatalytic reaction of $TiO_2$ was improved by doping an appropriate contents of F and N.

• Analytical Science and Technology
• /
• v.11 no.3
• /
• pp.202-205
• /
• 1998

X-ray absorption fine structure spectroscopic studies at the Ni K-edge have been performed for the Ni-Zn alloy coating layer on steel. The Ni-Zn interatomic distances and Debye-Waller factors were determined by fitting the experimental data with the theoretical spectra in the temperature range of 80 to 300K. The average Ni-Zn interatomic distance was found to be $2.557{\AA}$ and the variation of the Ni-Zn interatomic distance with temperature in this range was insignificant. From the comparison of the Ni-Zn interatomic distance with the nearest neighbor distance of pure Zn lattice it has been suggested that there is an apparent contraction around Ni atom.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.259-265
• /
• 1995

Antireflection coatings on optical lenses commertially available in domestic market are optically analyzed. Transmission spectra and reflection spectra are collected using spectrophotometers. The apparent absorption spectra around the absorption band edge are dominated by the substrate absorption. The reflection spectra and the apparent absorption spectra at visible region between 400nm and 700nm show very strong correlation to each other except a couple samples. The discrepency observed in the latters are due to an increased absorption in visible region by the substrate, which is negative effect of these samples. An antireflection coating consisted of $SiO_2/TiO_2/SiO_2/ZrO_2/Cr$ is made on c-Si substrate for spectroscopic ellispometry analysis. A film-by-film coating is accomplished and between each film deposition, ex-situ spectroscopic ellipsometry measurements are made. The analysis of the spectroscopic ellipsometry data reveals that the average film densities of $ZrO_2$ and $TiO_2$ reach only 80% of their respective packing densities and thick films are inhomogeneous along film growth direction. Discussions are made toward in-situ, real-time monitoring of the film growth so that a real-time feedback is possible to achieve a post-correction to minor deviations occured in the previous step. step.