• 제목/요약/키워드: Absorption Material

검색결과 1,918건 처리시간 0.027초

Fe계 나노결정립 분말의 표면 산화에 따른 전자파 흡수특성 (Effect of the Surface Oxidation on the Electromagnetic Wave Absorption Behavior of a Fe-based Nanocrystalline Alloy)

  • 구숙경;우수정;문병기;송용설;박원욱;손근용
    • 한국분말재료학회지
    • /
    • 제14권5호
    • /
    • pp.303-308
    • /
    • 2007
  • The oxidation of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline powder has been conducted to investigate its influence on the electromagnetic wave absorption characteristics of the soft magnetic material. Oxidation occurred primarily on the surface of nanocrystals. Oxidation reduced the real part of complex permeability due to the reduction of the relative volume of the powder, which otherwise contributes to the permeability. Oxidation reduced the absorption efficiency of the sheet at frequencies over 1GHz, indicating that the relative contribution of skin depth increments to the absorption was not significant. The pulverization and milling process lowered the optimum crystallization temperature of the material by $40{\sim}50^{\circ}C$ because of the internal energy accumulated during the fragmentation and powder thinning processes.

$HgGa_2S_4:CO^{2+}$ 단결정의 불순물 광흡수 (Impurity optical absorption of $HgGa_2S_4:CO^{2+}$ single crystals)

  • 김형곤;김남오;김병철;최영일;김덕태;현승철;방태환;이경섭;구할본
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집
    • /
    • pp.3-7
    • /
    • 2004
  • $HgGa_2S_4:CO^{2+}$ single crystal were grown by the chemical transport reaction(CTR) method. 1n the optical absorption spectrum of the $HgGa_2S_4:CO^{2+}$ single crystal measured at 298K, three groups of impurity optical absorption peaks consisting of three peaks, respectively, were observed at 673nm, 734nm, and 760nm, 1621nm, 1654nm, and 1734nm, and 2544nm, 2650nm, and 2678nm. At 10K, the three peaks(673nm, 734nm, and 760nm) of the first group were split to be twelve peaks. These impurity optical absorption peaks are assigned to be due to the electronic transitions between the split energy levels of $Co^{2+}$ sited in the $S_4$ symmetry point.

  • PDF

Optical Absorption and Fluorescence of NADH Encapsulated Sol-Gel Silicate Gels

  • Hong, Hye-Jeong;Jiin Jung;Jeong, Ae-Young;Kim, Dong-Pyo;Bae, Byeong-Soo
    • The Korean Journal of Ceramics
    • /
    • 제6권4호
    • /
    • pp.359-363
    • /
    • 2000
  • Reduced nicotinamide adenine dinucleotide (NADH) was encapsulated in transparent porous sol-gel silicate gels using by different organoalkoxysilane precursor. Characteristics optical absorption and fluorescence of NADH in the gels were examined with depending on NADH concentration and compared. Optical absorption in the aminopropyltrimethoxysilane (APTMS) gel is highest and remains constant during aging the gel. Thus, it is found that NADH in the APTMS gel is most stable and activated. On the other hand, methyltriethoxysilane (MTES) gel presents the lowest optical absorption diminishing with aging the gel. Measurable increase of fluorescence with raising the NADH concentration is observed except for the APTMS gel due to its solubility in the buffer during fluorescence measurement.

  • PDF

지중 전력케이블용 반도전재료의 이온성 불순물에 따른 흡습 및 열적특성 (Absorption and Thermal Properties According to Ionic Impurities of Semiconductive Materials for Underground Power Cable)

  • 이경용;최용성;박대희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
    • /
    • pp.133-137
    • /
    • 2004
  • In this paper, we investigated impurities content, absorption properties, and thermal properties showing by changing the content of carbon black which is semiconductive materials for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Impurities content of specimens and absorption properties were measured by ICP-AES (Inductively Coupled Plasma Atomic Emission Spectrometer) and Karl Fisher. And high temperature, heat degradation initiation temperature, and heat weight loss were measured by TGA (Thermogravimetric Analysis). The dimension of measurement temperature was 0$[^{\circ}]$ to 800$[^{\circ}]$, and rising temperature was 10$[^{\circ}/min]$. Impurities content was highly measured according to increasing the content of carbon black from this experimental result also absorption amount was increased according to these properties. Specially, impurities content values of the A1 and A2 of existing resins were measured more than 4000[ppm]. Heat degradation initiation temperature from the TGA results was decreased according to increasing the content of carbon black. All over, heat stabilities were EEA>EBA>pEVA. That is, heat stabilities of EVA containing the weak VA(vinyl acetate) against heat was measured the lowest.

  • PDF

Monte Carlo approach for calculation of mass energy absorption coefficients of some amino acids

  • Bozkurt, Ahmet;Sengul, Aycan
    • Nuclear Engineering and Technology
    • /
    • 제53권9호
    • /
    • pp.3044-3050
    • /
    • 2021
  • This study offers a Monte Carlo alternative for computing mass energy absorption coefficients of any material through calculation of photon energy deposited per mass of the sample and the energy flux obtained inside a sample volume. This approach is applied in this study to evaluate mass energy absorption coefficients of some amino acids found in human body at twenty-eight different photon energies between 10 keV and 20 MeV. The simulations involved a pencil beam source modeled to emit a parallel beam of mono-energetic photons toward a 1 mean free path thick sample of rectangular parallelepiped geometry. All the components in the problem geometry were surrounded by a 100 cm vacuum sphere to avoid any interactions in materials other than the absorber itself. The results computed using the Monte Carlo radiation transport packages MCNP6.2 and GAMOS5.1 were checked against the theoretical values available from the tables of XMUDAT database. These comparisons indicate very good agreement and support the conclusion that Monte Carlo technique utilized in this fashion may be used as a computational tool for determining the mass energy absorption coefficients of any material whose data are not available in the literature.

잔향실법 흡음률 측정에 미치는 확산체의 영향 (The effect of diffusers on the measurement of sound absorption in a reverberation room)

  • 한희갑;김경호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.1194-1197
    • /
    • 2006
  • Recently, international standard for measurement of sound absorption in a reverberation room has been amended. In the revised version, temperature, humidity and air pressure conditions are strictly restricted and also the concrete procedures are presented to reduce the differences in test results by adding inspection of diffusion, measurement uncertainty etc. In this paper, the systematic tests are conducted based on the inspection guide of diffusion defined by ISO 354 and the effects of diffusers on the measurement of sound absorption ratio are considered. As a result, we perceived that the averaged sound absorption ratio in mid and high frequency range is expected to measure around $0.05{\sim}0.1$ higher in high sound absorption material. Therefore, as for the reverberation room for measurement of sound absorption, we need to take into consideration not only the spatial standard deviation of sound pressure mandated by ISO 3741, but also, inspection regulation of diffusion showed by ISO 354.

  • PDF

폴리에스터 건식부직포의 흡음성 연구 (A Study on Sound Absorption of Polyester Dry-laid Nonwovens)

  • 배영환;이명성;김정연;최영옥;여상영
    • 한국염색가공학회지
    • /
    • 제34권1호
    • /
    • pp.38-45
    • /
    • 2022
  • Sound absorbing materials are being developed in various materials and shapes and they are being applied in many fields such as construction, transportation, civil engineering, and sound. Among many sound-absorbing materials, polyester fiber has no environmental problems and harmfulness, and is a material with good sound absorption properties while being inexpensive. So it is manufactured as a nonwoven sound-absorbing material and used in various fields. In this study, polyester dry-laid nonwoven with different basis weight were manufactured using three types of polyester staple fibers: regular solid, single-hole hollow, and low linear density. We focused on the effects of the properties of the fibers, which constitute nonwovens, on the sound absorption properties, and we considered the basis weight. As the basis weight of the nonwoven fabric increased, the pore size became smaller and the air permeability was lowered, but the sound absorption coefficient was higher. However, the single-hole hollow polyester fiber did not contribute to the increase of the sound absorption coefficient of the nonwoven. It was established that, lower fiber fineness caused the sound absorption coefficient of the nonwoven to be increased. It was also found that the increase in the sound absorption coefficient due to the application of low fineness appeared from a certain basis weight or more.

복합재료의 수분에 의한 열화 및 회복 메커니즘에 관한 연구 (A Study on Degradation and Recovery Mechanisms of Composites under the Moisture Environment)

  • 김윤해;김국진;한중원;조영대;배성열;문경만
    • Composites Research
    • /
    • 제21권2호
    • /
    • pp.8-14
    • /
    • 2008
  • 섬유강화 복합재료는 수분에 의해 강도저하가 발생하며 이로 인하여 파괴가 발생하여 인적 물적 피해를 야기하고있다. 본 논문에서는 흡습에 의한 강도저하의 원인을 규명하고자 하였다. 먼저 수분이 복합재료에 흡수되는 메커니즘을 가정하였다. 흡수 메커니즘은 step 1, step 2, 그리고 step 3로 구분하였다. 이 메커니즘을 증명하기 위하여 강화섬유 및 수지의 종류, 수분이 흡수되는 시간 등의 조건을 다르게 하여 시험을 하였으며 그 결과 건조에 의해 인장강도가 회복되는 가역(reversible)반응과 건조로 인해 회복이 불가능한 비가역(irreversible)반응이 모두 작용함을 알 수 있었다. 강도저하는 흡습율 2.5% 에서 거의 완료되며, 흡습율이 4%에 이르면 비가역반응에 의한 강도저하가 많이 작용하여 강도회복이 적어지는 경향을 보였다.

철도 노반 재료의 중금속 흡착특성과 안전성에 관한 연구 (A study on the adsorption characteristic and safety assessment of railway subsoil material)

  • 백승봉;길경익
    • 한국습지학회지
    • /
    • 제17권2호
    • /
    • pp.146-154
    • /
    • 2015
  • 국내의 철도 산업은 친환경적 지속가능한 교통으로 많은 관심을 받으며 지속적인 산업발전을 이루어왔다. 하지만 철도운영 시 발생하는 중금속 오염물질에 대한 처리 및 예방이 미흡하다. 철도 운영 시에 발생하는 중금속은 강우 시 강우유출수와 함께 흘러나온다. 특히 철도 교량의 경우 강우 시 중금속이 강우 유출수와 함께 수계로 직접 유입되어 하천 및 호소 등 오염의 원인으로 작용한다. 이러한 중금속 유출을 예방하기 위해선 철도 노반 재료의 흡착능이 중요하다. 본 연구에서는 기존에 철도 노반의 주 재료로 사용되는 자갈과 고로슬래그의 흡착능에 대하여 분석하였으며, Freundlich와 Langmuir 등온흡착식을 이용하여 고로슬래그의 흡착 특성에 대한 연구를 수행하였다. 그 결과 고로슬래그의 흡착양이 Cd와 Cu는 초기에 자갈보다 높게 나타났고, Pb와 Zn은 자갈의 흡착양이 높게 나타났다. 하지만 시간이 지남에 따라 고로슬래그의 흡착양이 기존에 철도 노반 재료로 쓰이는 자갈에 비하여 높게 나타났다. 흡착 특성은 Freundlich 등온흡착식에 비하여 Langmuir 등온흡착식에서 중금속의 결정계수가 더 높은 것으로 분석되었다. 또한 모델링을 이용하여 철도 노반 재료로서의 안전성을 평가하였다. 또한 모델링을 통해 기존 노반재료와의 안전성 비교 분석을 실시하였다. 그 결과 기존 노반재료인 자갈에 비하여 변형율이 약 10%정도 낮은 것으로 나타났다. 이는 중금속의 수계 유출을 예방 및 안전성 확보 측면에서 철도 노반 재료로 고로슬래그를 적용할 수 있을 것으로 판단된다.

Assessment of Absorption Property for Five Species According to Soaking Conditions for Manufacturing a Cask for Ripening Traditional Liquor

  • Park, Han-Min;Byeon, Hee-Seop
    • 한국가구학회지
    • /
    • 제19권6호
    • /
    • pp.420-427
    • /
    • 2008
  • To study the suitability of chestnut as a cask for ripening traditional liquors, the absorption property for pure water, liquor with 30% alcohol content and ethanol with 95% alcohol content were investigated for five species. Oriental oak had the greatest amount of liquid absorption while chestnut had the smallest amount. The absorption amount linearly increased with increasing soaking time. The absorption amounts for each section were greatest in RT plane, and the difference between LR plane and LT plane was very small for all soaking conditions. The anisotropy of absorption amount for five species was greatest in Japanese cedar and was smallest in white mulberry on the whole. And the change of absorption amounts according to soaking conditions tended to decrease in softwoods and increase in hardwoods, and the difference among wood species was not clear. From this result, it was found that chestnut with a small absorption amount, regarding of soaking behavior, was a good material as a cask for ripening traditional liquors, whereas small diameter oriental oak with a great absorption amount was not suitable in this purpose.

  • PDF