• 소음진동
• /
• 제4권3호
• /
• pp.377-384
• /
• 1994

This paper is an investigation of the performance of absorption diffusers to suppress the vent noise emitted when high pressure gas is throttled. First, experiment for the static performance is carried out. When there is no through-flow, the insertion loss has been obtained in terms of 1/3 octave band spectrum and the effect of the number of diffusers and the thickness of the absorption material on the static performance has been obtained. And the similarity in the spectrum of the static insertion loss is confirmed by comparing two similar models with different size. Second, the dynamic performance has been obtained by experiment using blow-down of compressed air from a storage tank through an orifice of diameter 10 mm. The back pressure by the diffuser is measured and compared with that of a single diffuser. It is found that the insertion loss of asingle diffuser is very low around 3 dB at high frequencies with negative value at low frequencies. By absorption material between the diffuser tubes, however, the performance is increased considerably. Without flow the static insertion loss increases by 3 - 4 dB by doubling the thickness or the density of the absorptionmaterial. With flow, however, the dynamic insertion loss increases. While, the back pressure by the diffuser is small enough to be neglected.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.539-542
• /
• 2010

In this paper, we designed and fabricated the Electro-Magnetic (EM) wave absorber for wireless LAN by using Amorphous and CPE. The material constants and the absorption properties were measured for the samples containing 50 %, 60 %, and 70 % weight fraction of Amorphous. Moreover, the EM wave absorption abilities were simulated for the EM absorbers in different thicknesses by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition ratio in Amorphous : CPE = 60 : 40 wt.% with the thickness of 4 mm has the absorption ability more than 35 dB at 2.4 GHz. Thus, it is expected the wireless LAN environment can be improved by using the developed absorber.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.137-140
• /
• 1993

Electrical properties and thermal annealing effects of $C_{22}$-quinolium(TCNQ) Langmuir-Blodgett(LB) films were studied. Typical current-voltage(I-V) characteristics along the perpendicular direction chow an anomalous behavior of breakdown near the electric-field strength of $10^{6}$V/cm. To see the thermal influence of the specimen, current was measured as a function of temperature(20∼$180^{\circ}C$). It shows that the current increases about 4 orders of magnitude near 60∼$70^{\circ}C$ and remains constant far a while up to ∼$150^{\circ}C$ and then suddenly drops. Such increase of current near 60∼$70^{\circ}C$ seems tn be related to a softness of alkyl chains. Besides the electrical measurements, UV/visible absorption(300∼800 nm) of the thermally annealed sample was measured to see the internal-structure change. It is found that there are four characteristic peaks. At 494 nm, the optical absorption of the thermally annealed specimen at $60^{\circ}C$ starts increase and stays almost constant upto∼ $140^{\circ}C$. And eventually it disappears above $180^{\circ}C$. After heat treatment of the specimen up to $150^{\circ}C$, Uv/visible absorption was measured while cooling.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.113-118
• /
• 2007

From the construction material the cement and the concrete which will reach to 90% are used to construction. But the cement occurrence (from the whole industry 4.4% of carbon dioxide exhaust quantity) makes the carbon dioxide of manufacture hour and anti- the recognition which is an environment industry. The cement absorbs the carbon dioxide during life period of the life time. It calls carbonation. In this study in order to evaluate the carbon dioxide absorption of the cement test produced the mortar specimens which it follows in the W/C. And carbonatable material of mortar specimens (calcium hydroxide) the quantitly it measured, reference study it led and absorption of carbon dioxide quantity it produced. Finally two result comparisons leads and it is a fundamental study which does the test evaluation possibility and a propriety investigation of carbon dioxide absorption quantity in objective.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.322.1-322.1
• /
• 2014

Many research groups have studied tandem or multi-junction cells to overcome this low efficiency and degradation. In multi-junction cells, band-gap engineering of each absorb layer is needed to absorb the light at various wavelengths efficiently. Various absorption layers can be formed using multi-junctions, such as hydrogenated amorphous silicon carbide (a-SiC:H), amorphous silicon germanium (a-SiGe:H) and microcrystalline silicon (${\mu}c$-Si:H), etc. Among them, ${\mu}c$-Si:H is the bottom absorber material because it has a low band-gap and does not exhibit light-induced degradation like amorphous silicon. Nevertheless, ${\mu}c$-Si:H requires a much thicker material (>2 mm) to absorb sufficient light due to its smaller light absorption coefficient, highlighting the need for a high growth rate for productivity. ${\mu}c$-SiGe:H has a much higher absorption coefficient than ${\mu}c$-Si:H at the low energy wavelength, meaning that the thickness of the absorption layer can be decreased to less than half that of ${\mu}c$-Si:H. ${\mu}c$-SiGe:H films were prepared using 40 MHz very high frequency PECVD method at 1 Torr. SiH4 and GeH4 were used as a reactive gas and H2 was used as a dilution gas. In this study, the ${\mu}c$-SiGe:H layer for triple solar cells applications was performed to optimize the film properties.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.456-462
• /
• 2013

Eco-friendly material applied to building would be one of the materials which is must developed for global environmental conservation and reduction of carbon dioxide. For development of eco-friendly material, a cellulose absorber has been developed with waste paper through adjustment of various mix proportions. The developed cellulose absorber has been tested for its acoustic properties such as absorption coefficient and dynamic stiffness. The absorption coefficient was evaluated by developing six samples and using impedance tube and reverberation chamber. As a result of the evaluation, 0.64(NRC) was secured in absorption coefficient and 4.7 $MN/m^3$ was indicated in dynamic stiffness. Also, for practical use of developed absorbers as inner heartwood in drywall, comparison test of sound reduction index was performed with existing glass wool absorbers and constructed drywall of gypsum board. The results have shown 55 dB(Rw) of sound reduction index in glass-wool wall and 46 dB(Rw) in cellulose.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.130-137
• /
• 1988

This thesis introduced that character of a treatment technique for a mading synthetic resin Hifiow-Ring. The material system of packings make an experiment air$NH_{3}$/air$H_{2}SO_{4}$, $SO_{2}$-air/NaOH, $NH_{3}$-air/$/H_{2}SO_{4}$ under general conditions. Lattices packing compared with conventional packings was proved low pressure loss and high separation efficiency for high loading per trans unit. And an inflow materal tested for absorption and rectification, it made an experiment under a range regular temperature, low energy and small amount of money. That made possible in simple equation, volume material tranfer coefficient$\beta_{L}$ . a by absorption or $\beta_{V}$ .a calculated in all range loading. The peculiarity pressure loss $\Delta\;P/NUT_{ov}$ for Hiflow-ring contributed to a fall cost of energy, a grade number of a vacuum rectification and absorption calculation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.479-482
• /
• 1999

Cured epoxy resins are extensively used for the electrical insulation in high-voltage equipments. The bisphenol A-based epoxy resins lured with azine show, especially, good thermal properties and mechanical resistances. For the technical and economic reasons, varing amount of inorganic fillers are added to endow the required special properties. In the large generators and motors of power plants, epoxy insulation is disclosed to the harsh conditions like the superheated steam and abrupt temperature variation. Hygrothermal aging at elevated temperatures tends to induce degradation in epoxy resins. To predict the effect of this degradation in DGEBA/MDA/SN/zeolite system, we proceeded the forced moisture absorption experiment using the autoclave. The thermal properties of the untreated and treated specimens were analyzed by DSC and TGA under the nitrogen flowing condition. The moisture absorption results showed a weight increase during hygrothermal aging at 1207. At the initial aging period, the system leaded to more or less postcuring but more prolonged environmental aging leaded the discoloration of specimen and lowering the T$_{g}$./.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.579-583
• /
• 2003

HgGa$_2$S$_4$: Co$^{2＋}$ single crystal were grown by the chemical transport reaction(CTR) method. In the optical absorption spectrum of the HgGa$_2$S$_4$: Co$^{2＋}$ single crystal measured at 298K, three groups of impurity optical absorption peaks consisting of three peaks, respectively, were observed at 673nm, 734nm, and 760nm, 1621nm, 1654nm, and 1734nm, and 2544nm, 2650nm, and 2678nm. At 10K, the three peaks(673nm, 734nm, and 760nm) of the first group were split to be twelve peaks. These impurity optical absolution peaks are assigned to be due to the electronic transitions between the split energy levels of Co$^{2＋}$ sited in the S$_4$ symmetry point.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.352-353
• /
• 2007

The spectrum for $0_{\circ}$, $90_{\circ}$-polarized light coincides with the spectrum for non-polarized light and also with the spectrum was observed in the LB film deposited using a fresh solution. And, the formation and dissociation of J-aggregates, anisotropic behavior was no longer observed in the heat treated merocyanine dyes LB films. But, in the optical absorption spectra of same LB films by UV irradiation at room temperature, their were observed only dissociation of J-aggregates, that is decrease of absorbance peak without change spectral shape. On the other hand, in the case of optical absorption spectra of the LB films by the heat treatment at $70^{\circ}C$ in the air, both of the shifted absorption bands decay and a monomer absorption peak of about 530 nm appears instead.