• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.288-294
• /
• 2000

The dyeing of Tencel fabric with Coptis chinensis Franch was studied. The colorant was extracted with distilled water under various concentrations of dyestuff, times, mordants. UV-VIS spectra were obtained to find the maximum wavelength and absorbance of colorant. Tencel fabric was dyed with different mordants in pre and post-mordanting methods. Maximum wavelength of spectrum was 343 nm, and K/S value of pre-mordant was higher than post-mordant. Aluminium and stannic mordants changed color from yellow to blue-greenish and red-bluish. Colorfastnesses of light, and washing were low grade, but that of perspiration was increased.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.145-148
• /
• 2000

In contrast to the $\pi$ -conjugated polymers which typically absorb light only in the visible spectral region, the $\sigma$-conjugated polymers can be used as efficient material absorbing light in the UV region. In this work, the electronic and optical properties of I$_2$-doped $\sigma$ -conjugated poly (methyl-phenylsilylene) (PMPSi) polymer were investigated. DC conductivity up to 1.2$\times$10$^{-4}$ S/cm was obtained by I$_2$-doping. In UV/Vis absorbance spectrum, a new peak was observed near 370 nm, which was explained by polaron model. The photoluminescence (PL) intensity decreased with increasing degree of I$_2$-doping, and the Infrared (IR) spectrum analysis revealed that the dopants are not directly coupled to the polymer, but effect motions of the methyl and phenyl groups.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.2
• /
• pp.90-95
• /
• 2019

Methylammonium lead bromide ($MAPbBr_3$) has attracted a lot of attention due to their excellent optoelectronic properties such as the compositional flexibility relevant to photoluminescence (PL) and UV-Vis absorbance spectrum, high diffusion length, and photoluminescence quantum yield (PLQY). Despite such advantages of organic-inorganic perovskite materials, more systematic study on manipulation of their optoelectronic properties in homo- or heterovalent metal ions doped halide perovskite nanocrystals is lacking. In this study, we systematically investigated the optical properties of colloidal $CH_3NH_3Pb_{1-x}Sn_xCl_{2x}Br_{3-2x}$ particles by addition of $SnCl_2$ into the typical methylammonium lead tribromide ($CH_3NH_3PbBr_3$) precursor solution. We found that only 1% addition of $SnCl_2$ shows a significant blue-shift from 540 nm to 420 nm in UV-Vis absorbance spectrum due to the strong quantum confinement effect. Furthermore, continuous blue-shift in photoluminescence spectra was observed as the amount of Cl increases. These experimental results provide new insights into the replacement of Pb within $MAPbBr_3$, required for the broadening of their application.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2245-2249
• /
• 2010

The physical properties of the LB films with merocyanine dyes have been published and attract attention due to the possibility of molecular structure control. The evaluation of the thin films was focused for the purpose of molecular structure control. The molecular structure in the case of the thin films with dyes can be examine by optical absorption spectra measurements. In the result measured by optical absorption spectra, the $[DX]_{1-x}[DO]_x$ LB films shows a large in-plane anisotropy and the transition dipole moment of red-shifted band is preferentially oriented perpendicular to the dipping direction of the film, while that of the blue-shifted band prefers the dipping direction. The spectrum for $0_{\circ}$, $90_{\circ}$-polarized light coincides with the spectrum for non-polarized light and also with the spectrum was observed in the LB film deposited using a fresh solution. These results show that the aging process does not cause a structural change in chromophore but a change in the degree of molecular orientation. In the results, study of the merocyanine dyes LB films using optical absorption spectra would an interesting problem of absorbance peak shifts and mixed components.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.352-353
• /
• 2007

The spectrum for $0_{\circ}$, $90_{\circ}$-polarized light coincides with the spectrum for non-polarized light and also with the spectrum was observed in the LB film deposited using a fresh solution. And, the formation and dissociation of J-aggregates, anisotropic behavior was no longer observed in the heat treated merocyanine dyes LB films. But, in the optical absorption spectra of same LB films by UV irradiation at room temperature, their were observed only dissociation of J-aggregates, that is decrease of absorbance peak without change spectral shape. On the other hand, in the case of optical absorption spectra of the LB films by the heat treatment at $70^{\circ}C$ in the air, both of the shifted absorption bands decay and a monomer absorption peak of about 530 nm appears instead.

• Clean Technology
• /
• v.23 no.4
• /
• pp.408-412
• /
• 2017

Pigment red 53:1 is a dye used in various products as a component of the inks, suspected of being carcinogenic. Thus, the environmental and occupational issues related to it are important. The enzyme-based approach with reusability has advantages to consume less energy and generate less harsh side- products compared to the conventional strategies including separations, microbe, and electrochemical treatment. The degradation of Pigment red 53:1 by the lignin peroxidase immobilized on the surface of magnetic particles has been studied. The immobilization of the peroxidase was conducted on magnetic particle surface with the treatment of polyethyleneimine, glutaraldehyde, and the peroxidase, in sequence. The immobilization was confirmed using X-ray photon spectroscopy. The absorbance peak of the pigment was monitored at 495 nm of UV/Vis spectrum with respect to time to calculate the catalytic activities of the pigment for the immobilized lignin peroxidase. For the comparison, the absorbance of the lignin peroxidase free in solution was also monitored. The catalytic rate constant values for the free lignin peroxidases and the immobilized those were 0.51 and $0.34min^{-1}$, respectively. The reusable activity for the immobilized lignin peroxidase was kept to 92% after 10 cycles. The stabilities for heat and storage were also investigated for both cases.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.50-58
• /
• 2014

A novel fullerene derivative with photoresponsive azobenzene group was designed and synthesized, and its photoresponsive properties were reported. Starting from 4-nitrophenol, compound 1, which is containing fullerene moiety connected to azobenzene group through covalent linkage was synthesized by 5 steps. All the intermediates and the final compound were characterized by $^1H$, $^{13}C$-NMR, FAB-Mass or elemental analysis. Compound 1 exhibited the expected photoresponsive behavior. Chloroform solution($10^{-5}M$) of it served to maximize the absorption at 351 nm corresponding to the trans-azobenzene chromophore. Irradiation of this solution with 365 nm light resulted in photoisomerization to cis-azobenzene, as evidenced by decrease in the absorbance at 351 nm and an increase in absorbance at 450nm. A photostationary state was reached within about 150 s. Thermal reversion to the original spectrum was observed over the course of about 6 h at room temperature in the dark. However, exposure to bright sun light for about 5 s also effect almost complete reversion to the trans-isomer. This indicates that there is no strong steric influence on the trans-cis reversible isomerization of compound 1.

• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.21-27
• /
• 1974

This work was carried out to investigate the chemical properties of the chelate compounds which were produced with 2-methoxy-5-nitrophenol(MNG) and metal salt such as copper nitrate and manganese nitrate. And obtained results were as in the followings. 1) The binding ratio of the chelate compounds formation were determined by using the molar ratio concentration method and their chemical structures were identified by IR-spectrum. 2) In the absorbance measuring, 2-methoxy-5-nitrophenol coordinated with manganese and copper showed the maximum absorbance at $430 m\mu$ and $410 m\mu$ respectively. 3) The binding ratio of chelated compounds were measured by molar ratio method and continuous variation method with spectrophotometer, which was identified as 1:2. 4) The conditional formation constant(log Kn value) of manganese and copper chelate compounds were 6.70, 6.75, respectively according to the equation of $log\frac{A-AM\circ n MNG}{AMm MNG-A}=n log (M\circ)+log Kn$ 5) The dissociations degree of manganese and copper chelate compound were $2, 300{\times} 10^{-7}$, $2, 346{\times} 10^{-7}$ respectively according to the molar calculation method.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1491-1504
• /
• 2012

InP quantum dot (QD)-organosilicon nanocomposites were synthesized and their photoluminescence quenching was mainly investigated because of their applicability to white LEDs (light emitting diodes). The as-synthesized InP QDs are capped with myristic acid (MA), which are incompatible with typical silicone encapsulants. We have introduced a new ligand, 3-aminopropyldimethylsilane (APDMS), which enables embedding the QDs into vinyl-functionalized silicones through direct chemical bonding. The exchange of ligand from MA to APDMS does not significantly affect the UV absorbance of the InP QDs, but quenches the PL to about 10% of its original value with the relative increase in surface related emission intensities, which is explained by stronger coordination of the APDMS ligands to the surface indium atoms. InP QD-organosilicon nanocomposites were synthesized by connecting the QDs using a short cross-linker such as 1,4-divinyltetramethylsilylethane (DVMSE) by the hydrosilylation reaction. The formation and changes in the optical properties of the InP QD-organosilicon nanocomposite were monitored by ultraviolet visible (UV-vis) absorbance and steady state photoluminescence (PL) spectroscopies. As the hydrosilylation reaction proceeds, the QD-organosilicon nanocomposite is formed and grows in size, causing an increase in the UV-vis absorbance due to the scattering effect. At the same time, the PL spectrum is red-shifted and, very interestingly, the PL is quenched gradually. Three PL quenching mechanisms are regarded as strong candidates for the PL quenching of the QD nanocomposites, namely the scattering effect, F$\ddot{o}$rster resonance energy transfer (FRET) and cross-linker tension preventing the QD's surface relaxation.