• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.99-107
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions which are high temperature and high pressure for an extended period time. Such material degradation leads to various component failures causing serious accidents at the plants. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this paper, artificial creep degradation test and ultrasonic measurement for their creep degraded specimens have been carried out for the purpose of evaluation for creep damage which can occur in high-temperature pipeline of fossil power plant. Absolute measuring method of quantitative ultrasonic measurement for material degradation was established, and long term creep degradationtests using life prediction formula were carried out. As a result of ultrasonic tests for crept specimens, we confirmed that the sound velocity decreased and the attenuation coefficient linearly increased in proportion to the increase of creep fractiin(${\phi}$c).

• 한국환경과학회지
• /
• 제22권2호
• /
• pp.173-185
• /
• 2013

In order to clarify the impact of wildfire and its thermal forcing on atmospheric wind and temperature patterns, several numerical experiments were carried out using three dimensional atmospheric dynamic model WRF with wildfire parametrization module SFIRE. Since wind can accelerate fire spread speed, the moving speed of fireline is faster than its initial values, and the fireline tends to move the northeast, because of the wind direction and absolute vorticity conservation law associated with driving force induced by terrain. In comparison with non-fire case, the hydraulic jump that often occurs over downwind side of mountain became weak due to huge heat flux originated by surface wildfire and wind pattern over downwind side of mountain tends to vary asymmetrically with time passing. Therefore temporal variation of wind pattern should be catched to prevent the risk of widfire.

• 보존과학연구
• /
• 통권26호
• /
• pp.189-202
• /
• 2005

This study carried out to understand thermoluminescence dating of ancient tiles at Jinju Janghungri Kilin site. Also radiocarbon dating by the benzene synthesis method and Liquid scintillation counting method were performed for comparison for the agedetermination of charcoal sample at the obtained same site.1st and 2nd glow curve were obtained according to the typical method thermoluminescence. Plateau tests of revealed the proper temperature range to be $300~440^{\circ}C$ Palaeodose average values were formed to the 2.44Gy.Annual dose of ancient tiles was calculated from soil samples and ancient tiles it self by measuring alpha radiation dose, potassium concentrations and water contents respectively. Annual dose average values were calculated to be 7.012mGy/yr.The radiocarbon age(BP year) was converted to calibrated age(AD/BC year) using high precision curve. Radiocarbon ages were calculated to be AD 15~17 .Comparison of samples with their radiocarbon and thermoluminescence ages for revealed the in range the AD 15~17. This result means that the measured absolute ages are in good agreement with each other within the margin of error.

• 응용통계연구
• /
• 제27권5호
• /
• pp.843-853
• /
• 2014

급증하고 있는 전력수요에 대한 신뢰성 있는 예측은 합리적인 전력수급계획 수립 및 운용에 있어서 매우 중대한 사안이다. 본 논문에서는 여러 시계열 모형의 비교를 통해 전력수요량과 밀접한 연관성이 있는 온도를 어떠한 형태로 고려할 것인지, 또한 4계절이 뚜렷하여 계절별 기온 차가 많이 나는 우리나라의 특성을 어떻게 고려할 것인지에 대하여 연구하였다. 모형 간 예측력을 비교하기 위하여 Mean Absolute Percentage Error(MAPE)를 사용하였다. 모형의 성능비교 결과는 냉 난방지수와 계절요인을 동시에 고려하면서 큰 변동성을 잘 고려해줄 수 있는 Reg-AR GARCH 모형이 가장 우수한 예측력을 나타냈다.

• 기본간호학회지
• /
• 제17권4호
• /
• pp.531-538
• /
• 2010

Purpose: This study was done to identify the effects of Qi hand reflexology on autonomic nerve activity in patients admitted to hospital. Method: A non-equivalent control group and quasi-experimental research with pre/post test design were used and 59 patients on a medical ward were assigned to either the experimental group (32) or the control group (27). The study variables included vital signs, autonomic nerve activities (ALF (absolute low frequency), AHF (absolute high frequency), nLF (normalized low frequency), nHF (normalized high frequency), SDNN (standard deviation of all normal-normal intervals)) and were evaluated using the QECG-3 system. The experimental group was treated with Qi hand reflexology for 10 minutes per day, for 3days. Results: Skin temperature and systolic blood pressure in the experimental decreased with treatment. ALF, AHF and SDNN for the experimental group increased with regulating proportion (nLF: nHF=6:4) and a significant difference between the groups was observed. Conclusion: The results indicated that application of Qi hand reflexology for patients in the hospital is effective in regulating the autonomic nervous system activation. Implication of finding should be useful for future research.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.6-10
• /
• 2005

Optimal extraction conditions such as pressures, temperatures, and modifiers on glycyrrhizin extraction from licorice were investigated using supercritical $CO_2\;(SC-CO_2)$ at 3 mL/min flow rate. Morphology of licorice tissue, after glycyrrhizin extraction, was examined by SEM, and absolute density ($g/cm^3$) measurement and glycyrrhizin content were determined by HPLC. Pure $SC-CO_2$ had no effect on glycyrrhizin extraction, but recovery of glycyrrhizin ($32.66{\pm}0.77%$) was enhanced when water was used as modifier. The highest recovery was $97.22{\pm}2.17%$ when 70% (v/v) aqueous methanol was added to 15% (v/v) $SC-CO_2$ at 50 MPa and $60^{\circ}C$. Under optimal extraction conditions, 30 MPa pressure and $60^{\circ}C$ heating temperature, glycyrrhizin recovery reached maximum ($102.67{\pm}1.13%$) within 60 min. Licorice tissue was severely damaged by excessive swelling, and absolute density of licorice residues was highest when aqueous methanol was used as a modifier.

• 콘크리트학회지
• /
• 제4권1호
• /
• pp.127-134
• /
• 1992

일반적으로 콘크리트 내부의 수분은 주로 중심부에 분포되어 있으며, 노출된 콘크리트의 표면은 주위의 온습도영향에 따라 건조하게 된다. 이에 따라 동일 부재내에서도 부위에 따라 함수율이 달라지게 된다. 이는 콘크리트의 내부공극에 존재하고 있는 수분의 증발과 이동으로 인하여 함수상태가 달라지기 때문이다. 이와 같이 콘크리트의 함수상태변화로 인하여 압축강도, 탄성계수, 용적변화등의 제성상이 각 부위에 따라 달라질 것으로 예상된다. 따라서, 콘크리트의 함수상태에 따른 콘크리트의 제성상을 명확히 파악함은 매우 중요하다고 판단된다. 본 연구에서는 콘크리트의 함수상태와 역학적 성상을 규명하는데 그 목적이 있다. 콘크리트의 함수량이 증가할수록 압축강도와 인장강도는 감소하나, 탄성계수는 증가한다. 본 연구에서 실험을 통하여 이와 같은 콘크리트의 성상과 함수상태와의 상관관계를 밝혔다.

• 대기
• /
• 제23권1호
• /
• pp.1-11
• /
• 2013

The angular momentum transport of an idealized axisymmetric vortex in the developing stage was investigated using the Weather Research and Forecast (WRF) model. The balanced axisymmetric vortex was constructed based on an empirical function for tangential wind, and the temperature, geopotential, and surface pressure were obtained from the balanced equation. The numerical simulation was carried out for 6 days on the f-plane with the Sea Surface Temperature (SST) set as constant. The weak vortex at initial time was intensified with time, and reached the strength of tropical cyclone in a couple of days. The Absolute Angular Momentum (AAM) was transported along with the secondary circulation of the vortex. Total AAM integrated over a cylinder of radius of 2000 km decreased with simulation time, but total kinetic energy increased rapidly. From the budget analysis, it was found that the surface friction is mainly responsible for the decrease of total AAM. Also, contribution of the surface friction to the AAM loss was about 90% while that of horizontal advection was as small as 8%. The trajectory of neutral numerical tracers following the secondary circulation was presented for the Lagrangian viewpoint of the transports of absolute angular momentum. From the analysis using the trajectory of tracers it was found that the air parcel was under the influence of the surface friction continuously until it leaves the boundary layer near the core. Then the air parcel with reduced amount of angular momentum compared to its original amount was transported from boundary layer to upper level of the vortex and contributed to form the anti-cyclone. These results suggest that the tropical cyclone loses angular momentum as it develops, which is due to the dissipation of angular momentum by the surface friction.

• 에너지공학
• /
• 제25권1호
• /
• pp.48-55
• /
• 2016

최소자연발화온도는 가연성물질이 주위의 열에 의해 스스로 발화하는 최저온도이다. 최소자연발화온도는 유기혼합물중 가연성 액체혼합물의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-hexanol+p-xylene 계의 최소자연발화온도를 측정하였다. 2성분계를 구성하는 순수물질인 n-hexanol과 p-xylene의 최소자연발화온도는 각 각 $275^{\circ}C$, $557^{\circ}C$로 측정되었다. 그리고 측정된 n-hexanol+p-xylene 계의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.1-8
• /
• 2016

최소자연발화온도는 가연성물질이 주위의 열에 의해 스스로 발화하는 최저온도이다. 최소자연발화온도는 유기혼합물중 가연성 액체혼합물의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-butanol+p-xylene 혼합물의 최소자연발화온도를 측정하였다. 2성분계를 구성하는 순수물질인 n-butanol과 p-xylene의 최소자연발화온도는 각 각 $340^{\circ}C$, $557^{\circ}C$로 측정되었다. 그리고 측정된 n-butanol+p-xylene 혼합물의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.