• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2015

In this study, the causes and countermeasures for the leakage of a sea dyke under construction are analyzed. In general, the seabed ground is clearly divided from the embankment but a lot of parts show abnormal zones with low resistivity from the results of electric resistivity survey. Hence the causes of the leakage are considered as following: three-dimensional shear strain behavior, irregular compulsory replacement of the soft seabed ground with low strength and quality deterioration of the waterproof sheets during the closing process. The improvement method is determined by considering the constructability in the seawater and its velocity condition, durability, economic feasibility, similar application cases and so on. Consequently, a combination of low slump mortar and slurry grouting and injection method is selected as an optimum combination. Mixing ratio and improvement pattern are determined after drilling investigation and pilot test. The improvement boundary is separated into general and intense leakage area. The construction is performed with each pattern and the improvement effects are confirmed. The confirmed effects with various tests after completion show tolerable ranges for all of the established standards. Finally, various issues such as prediction of length of the waterproof sheet, installation of it against seawater velocity, etc. should be considered when sea dykes are designed or executed around the western sea which has high tide difference.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.639-648
• /
• 2013

Metabolic syndrome is the most important risk factors of cardiovascular diseases So, it is judged that Quality of life of persons with metabolic syndrome inevitably deteriorate. For the purpose, the study aims to analyse the number of risk factors, and the relationship between abnormality of each risk factor and Quality of life, targeting adult women aged more than 19. For this study, data from the National Health and Nutrition Behavior Survey in 2007 and 2008 were incorporated and 4,365 subjects were collected for the study. Version 17.0 SPSS was used for data analysis. Statistical significance was defined as p<0.05. As a result of the study, the prevalence rate of metabolic syndrome was 24.2%. According to the number of risk factors of metabolic syndrome the regression coefficient of Quality of life was -0.024 when the number of risk factor was one, -0.048 when there were two risk factors, -0.090 when there were three risk factors, -0.117 when there were four risk factors, and -0.168 when there were five risk factors. The regression coefficient(abnormal/normal)of risk factors of metabolic syndrome were as follows; Waist circumference -0.035, Blood pressure was -0.064, Fasting glucose was -0,026 and HDL cholesterol was -0.012. In conclusion, as it was discovered that risk factors of metabolic syndrome had significant relations with Quality of life, it is suggested that the relations between some significant variables and Quality of life should be actively considered so that adult women can perceive metabolic syndrome properly and endeavor to improve their Quality of life.

• Journal of Hospice and Palliative Care
• /
• v.2 no.2
• /
• pp.109-113
• /
• 1999

Purpose : Because we don't have inappropriate health care system for the terminal cancer patients, there were abnormal behavior patterns of health care utilization. So, There were needs to develop the comprehensive care for terminal cancer patients. Increased attention is being paid to the futility of life-sustaining treatment and high cost of management of terminal cancer patients Materials and Methods : This study was performed on cancer patients, registered in 1996 Central Cancer Registry, who were as insured person of Korea Medical Insurance and died from January 1997 to June 1998. We studied the day of medical care and medical expenses of 151 cancer patients evaluable. Results : The mean day of inpatient care was 39 days, and the mean days of outpatient care was 14 days in study subjects. Mean expenses per day of medical care, day of inpatient, and day of outpatients care were 85,392 won, 105,908 won, and 40,173 won. 95% of medical expenses is paid to the general hospital, and 85% of medical expenses was paid for inpatient care. About half of all medical expenses in th last 6 months were incurred in the last 60 days of life, and about 30 percent were incurred in the last 30 days. Expenses of outpatients care increased between 6 month and 3 months, after which they decreased. Expenses of inpatients care increased during all last 6months Conclusion : The distribution or medical expenses during the last 6 months in our study is similar to the distribution of American Medicare costs. We need to study medical expenses during the last year of life with large scale and details in order to develop the plan about the management of terminal cancer patient.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.34-42
• /
• 2011

It's been reported that the global warming effect has invoked the ever increasing typhoon intensity and long-term sea level rise which jointly cause severe wave overtopping over breakwaters or shore dykes. A simple measure to cope with this undesirable change may be just to increase the crest height of the dykes and breakwaters. This is surely effective to prevent wave overtopping, but it also decreases the seaward visibility of coastal waterfront. In this paper, a dynamic deformable rubber membrane parapet which not only reduces wave overtopping in storm period but also secures seascapes in normal days is presented. Several optimal configurations of the parapet are proposed. Through numerical analyses using a nonlinear finite element model and hydraulic experiments, the air controlled expansion and contraction of the parapets, their behavior against wave overtopping and structural stability are investigated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2015-2022
• /
• 2008

The effect of content of $Al_2O_3+Y_2O_3$ sintering additives on the densification behavior, mechanical and electrical properties of the pressureless-sintered $SiC-ZrB_2$ electroconductive ceramic composites was investigated. The $SiC-ZrB_2$ electroconductive ceramic composites were pressurless-sintered for 2 hours at 1,700[$^{\circ}C$] temperatures with an addition of $Al_2O_3+Y_2O_3$(6 : 4 mixture of $Al_2O_3$ and $Y_2O_3$) as a sintering aid in the range of $8\;{\sim}\;20$[wt%]. Phase analysis of $SiC-ZrB_2$ composites by XRD revealed mostly of $\alpha$-SiC(6H), $ZrB_2$ and In Situ YAG($Al_5Y_3O_{12}$). The relative density, flexural strength, Young's modulus and vicker's hardness showed the highest value of 89.02[%], 81.58[MPa], 31.44[GPa] and 1.34[GPa] for $SiC-ZrB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature respectively. Abnormal grain growth takes place during phase transformation from $\beta$-SiC into $\alpha$-SiC was correlated with In Situ YAG phase by reaction between $Al_2O_3$ and $Y_2O_3$ additive during sintering. The electrical resistivity showed the lowest value of $3.l4{\times}10^{-2}{\Omega}{\cdot}cm$ for $SiC-ZrB_2$ composite added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at 700[$^{\circ}C$]. The electrical resistivity of the $SiC-TiB_2$ and $SiC-ZrB_2$ composite was all negative temperature coefficient resistance (NTCR) in the temperature ranges from room temperature to 700[$^{\circ}C$]. Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.342-347
• /
• 2020

Recently, as the collaborative robot has been introduced into the domestic industrial robot market, it is installed mainly in the manufacturing industry. Collaborative robots are subject to the safety regulations of industrial robots by Article 93 of the Safety Inspection of the Industrial Safety and Health Act. The sites where collaborative robots are to be installed must perform risk assessments for robots-humans, work environments, and work methods and reduce the risks according to ISO 10218-2 and ISO 12100. On the other hand, because it is early in the introduction of collaborative robots, new risks for collaborative robots have not been issued, and risk assessments are unfamiliar and difficult to apply in the workplace. The risk assessment of collaborative robots aims to identify and reduce the risk of a high probability of occurrence by focusing on the abnormal behavior of humans, human errors, equipment defects, and interlock functions. In this study, a risk assessment was applied to a domestic automobile parts production plant, and improvement measures were drawn. This risk assessment is expected to be useful for improving the safety of small businesses by continuously discovering risk assessment examples of collaborative robots.

• Journal of Nutrition and Health
• /
• v.14 no.2
• /
• pp.59-70
• /
• 1981

The objective of this study is to induce the primary characteristics of phenylketonuria in infant rats during the first 2 weeks after birth. The critical biochemical parameter in the development of phenylketonuria is the elevation of plasma phenylalanine while tyrosine is maintained at a relatively low level. A PKU-like condition was induced in infant rats during the first 2 weeks after birth using a modification of our previously published procedure for the development of a temporary (1 to 3 days) PKU-like condition. Phenylalanine was administered by stomach intubation every 6 hours (starting at 6:00 a.m.) at a dose level of 400mg per kg body weight (after birth-day 2 thru 5) and 500mg per kg body weight (day 6 thru 14). Amethopterin was given at 0.00625 or 0.0125mg per kg body weight (day 3 thru 14) and p-chlorophenylalanine at 50 mg per kg body weight (day 5 thru 14) at 9:00 a.m. and 9:00 p.m. At the times measured (6,10 and 14 days) plasma phenylalanine/tyrosine (P/T) ratios were elevated from a normal value of the or less to values ranging from 6 to 15. During the second week after birth a staggering gait, abnormal stance and decreased social behavior were also observed. None of these PKU-like characteristics were apparent in the three control groups receiving (a) no phenylalanine or inhibitors, (b) phenylalanine alone, or (c) inhibitors alone. The establishment of these primary biochemical characteristics of phenylketonuria by stomach intubation of phenylalanine and a combination of low dose levels of enzyme inhibitors to infant rats provides an experimental system which should he valuable for extensive biochemical, histological and behavioral studies in phenylketonuria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.737-742
• /
• 2016

We prepared five different ethylene-propylene copolymers (EPCs) for use as the encapsulant of a photovoltaic module. All of the polymers were of commercial grade from ExxonMobile company and had different ethylene/propylene compositions. The crystallization behaviors and crystal structures of the polymers were analyzed by differential scanning calorimetry and wide angle X-ray scattering diffractometry, respectively. We observed the general trend that the degree of crystallization, density and glass transition temperature of the EPCs decreased with increasing ethylene content. However, an unexpected result was also observed: the EPC with the highest ethylene content (22.2 mol. %) showed the highest melting temperature. As a result, the EPC with 22.2 mol. % of ethylene shows the highest light transmittance, due to its having the lowest degree of crystallization and highest thermal creep resistance. This abnormal result is attributed to the blocky structure prepared by ExxonMobile's special catalyst technology. It was also observed that new additional melting peaks appeared as the crystallization time increased. Using wide angle X-ray scattering diffractometry, it was confirmed that these additional peaks originated from the formation of a new crystal structure caused by annealing.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.405-414
• /
• 2010

According to the statistics of SecurityFocus in 2008, client-side attacks through the Microsoft Internet Explorer have increased by more than 50%. In this paper, we have implemented a behavior-based malicious web page detection system and a blacklist-based malicious web page filtering system. To do this, we first efficiently collected the target URLs by constructing a crawling system. The malicious URL detection system, run on a specific server, visits and renders actively the collected web pages under virtual machine environment. To detect whether each web page is malicious or not, the system state changes of the virtual machine are checked after rendering the page. If abnormal state changes are detected, we conclude the rendered web page is malicious, and insert it into the blacklist of malicious web pages. The malicious URL filtering system, run on the web client machine, filters malicious web pages based on the blacklist when a user visits web sites. We have enhanced system performance by automatically handling message boxes at the time of ULR analysis on the detection system. Experimental results show that the game sites contain up to three times more malicious pages than the other sites, and many attacks incur a file creation and a registry key modification.

• Korean Journal of Veterinary Research
• /
• v.50 no.2
• /
• pp.93-103
• /
• 2010

This study investigated the potential effects of amitraz on the pre- and postnatal development, behavior, and reproductive performance of offspring of parent rats given amitraz during pre-mating, gestation, and lactation. The test chemical was administered via the drinking water containing 0, 40, 120, and 360 ppm to male rats from 2 weeks before mating to the end of 14-day mating period and to females from 2 weeks before mating, throughout mating, gestation and lactation up to weaning. Based on fluid consumption, the male rats received an average of $0,\;5.7{\pm}1.33,\;13.2{\pm}2.08,$ and $35.8{\pm}3.42$ mg/kg/day amitraz, and the female rats received an average of $0,8.7{\pm}4.42,\;20.1{\pm}9.60,\;and\;47.6{\pm}22.38$ mg/kg/day amitraz, respectively. At 360 ppm, an increase in the incidence of abnormal clinical signs, a suppression in the body weight gain, a decrease in the food consumption and litter size, an increase in the post-implantation loss, and a decrease in the seminal vesicle weight were observed in the parent animals. In addition, a suppression in the body weight gain, a decrease in the grip strength, a delay in the negative geotaxis, an increase in the pre- and post-implantation loss, and a decrease in the number of live embryos were observed in the offspring. At 120 ppm, suppressed body weight gain and reduced food consumption were observed in the parent rats. Suppressed body weight gain and decreased grip strength were also observed in the offspring. There were no signs of either reproductive or developmental toxicity at 40 ppm. Under these experimental conditions, the no-observed-adverse-effect level of amitraz for parent rats and their offspring was estimated to be 40 ppm in rats.