• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.232-237
• /
• 2007

임베디드 시스템은 특정 목적을 수행하기 위해 설계된 시스템이며, 임베디드 운영체제는 실시간 운영체제 범용 운영체제로 나뉜다, 실시간 운영체제는 각 운영체제에서 각각의 API를 제공하기 때문에 응용프로그램 작성 시 API를 새로 익혀야 되는 단점이 있다. 범용 운영체제는 사용자에게 익숙한 POSIX API를 제공 하지만 커널 이미지 크기가 커서 센서와 같은 메모리가 작은 운영체제에는 이식하지 못하는 단점이 있다. 본 논문에서는 이러한 단점을 보안하고 장점을 살리기 위해 컨포넌트화 하여 확장 및 재구성이 가능하도록 하고 POSIX 기반의 API를 제공하여 응용 프로그램 작성에 용의하도록 하는 KHIX 임베디드 시스템 운영체제를 설계 및 구현하고 고성능의 PXA255, 저성능의 ATmega128에 이식한 내용을 다룬다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.437-438
• /
• 2012

대부분 소형풍력발전은 운전 범위 이상이 될 경우 시스템 보호를 위해 Dump Load 방식 또는 전기자 반작용을 사용하며 순간 단락 시 돌발 단락 전류에 의해 풍력 발전기의 기계적 손상이 발생 된다. 본 논문에서는 ATmega 128을 이용한 PWM의 제어 방식 적용하여 돌발 단락 전류 억제하는 시스템을 구성 하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.407-408
• /
• 2011

본 논문에서는 현재 생산하고 있는 흉부 촬영 장치의 위치제어 기능을 개선하는 제어모듈의 개발에 대해 논하였다. 현재 생산되고 있는 흉부 촬영 장치는 스위치를 수동으로 조작하여 촬영에 적당한 위치에 도달하였을 때 멈춘 후 촬영을 하고 있다. 그러나 이 방식은 원하는 위치에 정확히 위치시키기 위해서는 원하는 위치가 될 때까지 스위치 조작을 반복하여야 한다. 따라서 단 한 번의 스위치 버튼을 누르기만 하면 정확한 위치에 도달하도록 스위치 모듈과 제어장치 모듈의 기능을 개선시켜 위치 설정을 위한 조작 시간을 줄이고 사용의 편의성을 향상시켜 업무의 효율성을 기할 수 있도록 하였다.

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.663-665
• /
• 2009

Ubi-Home 환경에서 장치제어를 하기위해 다양한 방법이 제안되었다. 그 중 원격지에서 장치제어를 하기 위해 특정 기기(로봇)를 활용할 수 있다. 하지만 이와 같은 방법에는 로봇과 장치들의 위치인식과 이동경로 설정에 따른 제약사항이 따른다. 또한 이러한 위치인식 및 이동에는 미리 작성된 하나의 맵이 사용되므로 새로운 환경의 변화나 확장에 적용할 수 없다. 따라서 본 논문에서는 로봇과 장비의 위치인식과 이동경로를 위한 학습형 맵 작성 기법을 제안하며, 테스트를 위해 Atmega128v4 MCU와 AX-12+ Motor, AX-S1 Sensor, ZBS-200 Zigbee, CL-1L5/603LM Infrared Ray Sensor로 로봇을 제작하여 실내 환경 모형에서 테스트하였다.

• Annual Conference of KIPS
• /
• 2011.11a
• /
• pp.11-14
• /
• 2011

안드로이드 블루투스를 이용한 앱으로, 사용자가 도난방지 시스템을 사용하여 개인 소지품에 모듈을 부착하여 도난방지를 할 수 있는 시스템이다. 폰과 모듈간의 블루투스 수신 감도(RSSI)를 체크하여 수신 거리를 측정하게 되고, 그 거리가 10m이상 떨어지게되면 사용자에게 도난 알림을 알려준다. 또한, 사용자에게 전화가 온 것을 모듈 자체에서 수신하여 알려주는 핸즈프리 기능도 갖췄다. 모듈은 ATMEGA128(MCU), FB155BC(블루투스 모듈), 부저, 진동등의 부품을 조립하여 제작하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.833-838
• /
• 2011

RFID system in manufacturing industry is used to collect, categorize, and process the data of products. To install RFID system for a large factory, a large amount of wired data communication network is necessary for RS232 communication. If the installed location of RFID system in the factory is changed or extended, a reinstallment is required for the already installed wired data network. A large amount of time/financial reinvestment is necessary for such reinstallation. By using wireless data communication network, however, the initial installation and reinstallation are very simple. In this paper, we implemented a wireless communication system and RFID system. We used the CC1020 chip for wireless communication system and EM4095 chip for RFID system. CC1020 chip enables highly-reliable data communication, and by setting a simple status register, it can switch between transmitting/receiving status and it can choose the desired frequency of either 400 MHz or 900 MHz. Also, Communication range is 50 m, if external antenna is used. EM4095 is a chip for RFID reader system with the carrier frequency of 125 KHz. This chip can implement the reader system by connecting a small number of components. And EM4100 was used for RFID system. EM4100 is read-only type. Atmega128 is used to control a wireless communication system and RFID system. We confirm that the system can communicate without error up to 50 m from sender. In the paper, the circuit diagram and operation program for CC1020 and RFID system are presented. The system used in the experiment is shown in pictures, and the data movement pattern of CC1020 is shown in the diagram, and the performance of each transmission method is presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2641-2646
• /
• 2009

The more growing on home automation system at automatic control, the more efficiency required for energy consumption and for recycling energy in near future. Heating is essential in general apartment. Heating method is two types in apartment. One uses electricity, and other one uses warm water. If use electricity, is not efficient by rise of electric charges. But, It can reduce much in expense aspect, if use warm water. When use warm water, temperature of warm water is not equal from all pipe parts. Therefore, indoor tempera can be unequal with set point. Solution of these problems is as following. Temperature sensor in warm water attach pipe. The measured temperature transmits by real time. Temperature of warm water controls in receiver side. In this paper, we propose an automatic temperature transmission system for the heating pipe at home, that is a low-power based, and supply the energy source from a small AC motor resided in bottom cement mortal. The proposed system is used in power mechanism from a collision process of water-jet using propeller water-difference and also designed a CPU module by Atmega8 at ATMEL co., Inc. and a communication module by CC1020 at Chipcon co., Inc.

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.481-489
• /
• 2014

In this paper, the automatic standby power blocking socket outlet to reduce standby power by blocking power threshold is implemented. Where, the standby power means a flowing power when a disused power electronic is plugged into the socket outlet. The proposed socket outlet can cut off the standby power by establishing a proper block power threshold electronic device according to each electronic device because it can monitor the amount of power through the smart machines such as the real-time PC or mobile phone and directly control the blocking power threshold. The software is implemented by using Visual Studio software, code vision and SN8 C studio, and the hardware is embodied in ATmega128, SN8F27E93S, USB to UART, and relay etc. Through the simulation, we find that the standby power of the proposed method is similar to that of the conventional method in case of the cellular phone but the standby power of the proposed method is much less than that of the conventional method in case of the computer, air conditioning, and set-top box. Therefore, it is proved that the proposed socket outlet has a superior performance in terms of the standby power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.590-595
• /
• 2016

The US is pursuing a plan to raise the subsidies for electric vehicles by more than 30%. The number of electric vehicles in Europe is expected to be one million by 2020 and 2030 and there are plans to expand in the center of Germany to supply six million electric vehicles on the dissemination and development policies. The development of the electric vehicle is not simply a technical trend but there is the potential to improve the access to this technology and the possibility of changing the entire social system and long-term energy security. Domestic competition is also increasing the supply of electric vehicles, as new blue ocean markets are emerging. The current domestic On-board Charger (Home Charger) plans to be suspended from the 2015 government-sponsored installation, This paper on the IEC 61851-1 and IEC 61851-22 specifications analyzes the development of a midnight electricity charger as a low-cost algorithm, the decrease in price and the improved convenience of the On-board Charger for Bluetooth module with the ATmega128 existing charger system, and the UI configuration via the LCD Panel to a Smartphone app are proposed.