• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.280-282
• /
• 2005

This paper describes switching overvoltage generated during transient state in 22.9kV combined distribution systems. For analysis, distribution overhead line, underground cable and surge arrester are modeled using EMTP/ATPDraw. Simulation results show switching overvoltage according to various kind of parameter and systems such as closing angle and cable length.

• 전기학회논문지P
• /
• 제61권1호
• /
• pp.23-28
• /
• 2012

The market of domestic Power Plant Generator Protection and Control System (GPCS) is narrow and required the high reliability, and technology. So, it is still operated as turn-key. In recent years, digital relays has evolved into IED can perform the control and monitoring functions without central monitoring based on IEC61850 international standards communications, and attention for advancement of smart grid and ECMS has been increased in South Korea. The increasing attention on multi-function IED, DGPS(digital generator protection system), for internal fault protection of large generator results in starting a national project in South Korea, the IED prototype development for next-generation power units. The voltage restrained overcurrent relay have been used as back-up overcurrent protection for generators. In this paper, voltage restrained overcurrent relay is one of the back-up protective factors in generator protection IED was presented. For evaluation performance of the voltage restrained overcurrent relay, the data of ATPDraw5.7p4 modeling was used.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.217-219
• /
• 2008

Among the Flexible AC Transmission Systems (FACTS) devices, Unified Power Flow Controller (UPFC) is considered as the most powerful and versatile one as it provides simultaneous, real time control of the transmission parameters, voltages, impedances, and phase angles which determine the power flow in AC transmission systems. This paper presents modelling of UPFC and describes its characteristics. The UPFC implemented in this paper is based on Sinusoidal Pulse Width Modulation (SPWM) and Electro-Magnetic Transients Program (EMTP)/ATPDraw is used to model and analyze it. The simulation results confirm advantages of UPFC in operational performance with respect to the steady state Power flow regulation and the transient stability control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.175-177
• /
• 2005

This paper analyzes transient behavior due to switching overvoltage in 22.9kV combined distribution systems. Computer models are consisted of distribution overhead line model, underground cable model and surge-arrester model in this paper. The computer models are made by EMTP/ATPDraw simulation and Line constants are calculated by ATP_LCC. This paper analyzes the various parameters affecting. These factors include closing angle and cable length.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.48-54
• /
• 2007

본 논문에서는 전자과도현상 해석 프로그램인 ATPDraw를 이용한 사례연구로써 인체에 전격이 가해지는 순간의 과도현상을 해석하였다. 사례연구를 위한 2가지 전격 모델은 최악의 환경을 조성하고자 수중에서 발생하는 것으로 가정하였으며, 첫째, 인체가 수중에서 전원설비의 노출 충전부에 접촉하였을 경우와 둘째, 인체의 수족이 수중에서 동시에 대지에 접촉하는 경우를 모델링하였다. 모델링 후 각 사례에 대해 인체의 각 부위에서의 계산된 전압, 전류를 비교하여 전격 순간의 과도현상을 해석하였다. 첫 번째 모델에 대한 해석 결과, 인체가 수중 노출충전부에 촉수시 순간적인 과도현상이 발생하며, 이때의 전압, 전류는 촉수 전후보다 현저히 증가되는 것을 확인하였다. 그러나 이 현상은 지속시간이 매우 짧아 통전전류와 시간의 적이 안전한계 이내임을 감안할 때, 수용가의 상용전압에서의 전격의 영향은 그다지 크지 않을 것으로 사료된다. 두 번째 모델에서는 인체의 수족이 대지에 동시에 접촉했을 경우, 접촉 순간 인체에 유기되는 전압의 크기는 전반적으로 감소되었으나, 가슴 부위를 통과하는 전류량이 급증하였다. 그러나 그 크기가 작고 지속시간이 짧아 인체에 미치는 전격의 영향은 미미할 것으로 사료된다. 결국 두 경우 모두 전압의 크기, 인체 임피던스에 따라 전격의 영향이 좌우될 것으로 판단된다.

• 전기의세계
• /
• 제53권11호
• /
• pp.21-40
• /
• 2004

• 전기학회논문지
• /
• 제56권3호
• /
• pp.472-480
• /
• 2007

This paper analyzes overvoltage on testing line for various parameter effect examination. Model systems consist of overhead line and underground cable. The model considered actual characteristic data of distribution lines. and will be constructed at testing yard. The simulations were performed under various line configuration such as cable kinds, cable length, lightning wave, lightning wave time, transformer and branch circuits. The simulation models are established by EMTP/ATPDraw and Line Constants are calculated by ATP_LCC. When lightning surge strikes on conductor of overhead line, EMTP/ATPDraw calculates overvoltage in many cases. Simulation results will be compared with real testing results at testing yard. The compared results will be used to establish protection methods in actual underground distribution systems.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권11호
• /
• pp.537-545
• /
• 2001

This paper describes the analysis of sheath circulating current and various methods to reduce the large circulating current in case of operating cable system using EMTP/ATPDraw. And also, possible methods are proposed through a detailed analysis regarding cable systems by considering various electrical and environmental factors. It is evaluated that the proposed reduction methods can be effectively applied to reduce the large sheath circulating over current with the minimized electrical problems.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.35-40
• /
• 2007

The one step type and two step type pole are used in distribution line. If the three phases are not balanced, the communication line can be damaged by induced voltage. This paper calculates the neutral current using KEPCO's distribution system model which is only composed by one step type pole. The used system model is modelled by using ATPDraw and the neutral current is calculated by using EMTP/MODELS. Many cases for abstracting the neutral current characteristics in KEPCO's distribution system are simulated and analyzed.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.313-321
• /
• 2006

This paper describes the overvoltage obtained by surge behavior analysis in testing underground distribution systems. Model systems consist of overhead distribution line and underground cable. Such model system considered various characteristics of actual distribution systems will be soon constructed at testing yard. Simulation is carried out under various states such as cable kinds, cable length, lightning wave and time, and branch circuits. Model is established by EMTP/ATPDraw. Line Constants are calculated by ATP_LCC. When the direct lightning surge strikes on conductor of overhead line, the overvoltage is calculated using EMTP/ATPDraw in many cases. Simulation results will be compared with real testing results at testing yard in the near future. The compared results will be used to establish protection methods in actual underground distribution systems.