• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.10
• /
• pp.797-810
• /
• 1990

The error rate equations of digitally modulated signals transmitted through the Gaussian noise and tone multiple interference channel have been derived. Using the derived equations of error probabilities in the environments of Gaussian noise tone interferer and Gaussian noise multiple interferer, the error rate performances of various digitally modulated signals have been evaluated, and compared in graphs as a function of average carrier to tone interferer power ratio(CIR), average carrier to multiple interferer power ratio(CIT) and the average carrer-to-Gaussian noise powr ratio(CIR). In this paper, the modulation schemes such as amplitude shift keying (ASK), phase shift keying(PSK), frequency shift keying(FSK), minimum shift keying(MSK), quadrature amplitud modulation(QAM) and amplitude phase shift keying(APK) have been selected for the study of performance comparison. The results of comparison show us that, in low bits/sec/Hz, PSK is superior to the other schemes, but in high bits/sec/Hz, mixed multi ary type is better than single multi ary type. And in strong noise evironment, the multiple interferer has much influence than tone interferer, however, in low noise environment. the mojor error factor is tone interferer. But tone interference effect nearly disappears over specified CIR level about 20[dB]. And the modulation schemes using amplitude are heavily influenced by multiple interference.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.473-478
• /
• 2021

Vibrato corresponds to a modulation of frequency and is one of the most frequently used techniques to enrich vocal and musical instrument sounds. Whereas the fundamental frequency trajectories of vibrato tones are generally modeled as a sinusoid, they are sometimes observed to be non-sinusoidal. In this paper, we propose a method to analyze the characteristics of non-sinusoidal fundamental frequency trajectories of vibrato sounds. The proposed method performs Fast Fourier Transform (FFT)-based harmonic analysis on the frequency trajectory, analyzes vibrato parameters, and calculates a sinusoid purity factor. We applied the proposed method to flute, viola, and saxophone vibrato tones, whose results showed the effectiveness of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.202-207
• /
• 2016

Most of noises from cars or home appliances accompany successive impulsive noise due to repeated operation. A human auditory system is able to perceive the successive impulsive noise as either a set of independent noise or amplitude modulated noise according to its occurrence period. This study is to identify main influence factors on understanding of impulsive characteristics and find most appropriate sound quality metrics to express the successive impulsive noise. To do this, the successive impulsive noises were designed and utilized to perform a listening test for identifying conditions where successive impulsive noise can be recognized to have impulsive characteristics. These results were analyzed with sound quality metrics such as loudness, fluctuation strength, and roughness in order to compare the subjective results with the objective results. Consequently, the results revealed that the successive impulsive noise exhibits impulsive characteristics when its occurrence frequency is less than 50 Hz. It was also observed that roughness and fluctuation strength results are not applicable to express the successive impulsive noise because they heavily depend on the amplitude modulation characteristics. On the other hand, loudness results are considered to be useful as an evaluation factor of the successive impulsive noise through the use of loudness limen because it does not depend on the amplitude modulation characteristics.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.8-15
• /
• 2020

In this paper, we propose a frame synchronization algorithm for robust to the combined effects of large Doppler fluctuations and extended, time-varying multipath in the underwater acoustic communication. From the algorithm, we can recover a high timing error which is occurred from an acoustic propagation delay and uncertainty of oscillator between transmitter and receiver. In order to verify the performance of the synchronization algorithm, the lake trial results are used. The lake experiments are performed in a Gyeongcheonho located in Mungyeong-si, Gyeongsangbuk-do. We can see that the start position of frame is adjusted after the frame synchronization while the receiver moving.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.368-374
• /
• 2016

This paper presents constructing transmitter and receiver by using a direct sequence spread spectrum techniques to DPSK (Differential Phase-Shift Keying) scheme in underwater acoustic communication. Since DPSK signal can be demodulated if the receiver knows only the phase difference between the adjacent bits, DPSK receiver structure has the advantage of being simplified. In the conventional receiver, two adjacent symbols of transmitted signal before despread are passed to the transition correlator that detects data by comparing maximum correlation outputs. At this time, the error for maximum value of the correlator output may increase because of low SNR (Signal to Noise Ratio) or high Doppler shift frequency according to the underwater channel. In this paper, we propose a method for accurate detection result using the width as well as the magnitude among outputs produced by the correlator. The performances of the proposed method was evaluated by simulation and lake trial data.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.71-76
• /
• 2000

A TC-16ADPSK scheme for transmitting different kinds of information simultaneously is proposed in this paper. The scheme is designed for simultaneously transmitting two kinds of Information on one channel. In signal mapping, a data of two kinds of information is used to phase modulation on Star-16APSK constellation and the other to amplitude modulation. In detection, each data independently recovers from mixing signal on each detector Therefore, we can transmit two kinds of Information on one channel can be transmitted efficiently. BER performance of the proposed scheme is analyzed on AWGN channel and Rayleigh fading channels on a computer with Matlab communication toolbox. On same SNR, the Gray code mapping has more 0.5-1.5dB coding gains than Ungerboeck's code mapping gains.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.407-412
• /
• 2014

In this paper, we propose an underwater acoustic communication of FH-MFSK(Frequency-Hopped Multiple Frequency Shift Keying) system with multiple orthogonal property. Generally, the processing of FSK(Frequency Shift Keying) method is simple, but it is vulnerable to ISI (Inter-Symbol Interference) caused by multipath transmission. In this paper, the orthogonal codes are generated with the same number of transmitting symbols, and these codes are corresponding to multiple frequencies. We used m-sequence to generate multiple orthogonal codes. We compared the performance of proposed method with conventional MFSK method via the experiment. As a result, we confirmed that the proposed method shows 6~10 % lower error rate at 100 bps than conventional method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.163-166
• /
• 2002

The underwater acoustic communication has been widely applied to various objects such as ocean exploration-development and military affairs. And recently for embodiment of the communication system that is installed in a submarine and underwater work system, many studies have been progressing. This scope of the main studies in the meantime. It made it possible for a diver and a scuba diver who arc difficult to notice the situation of the outside because of staying in the water to hear a sound through a small speaker by using a ultra sound transducer that a central frequency is 32KHz after modulation of a voice to give the information of the outside. Also in case of happening an emergency to a diver in the water, it made him/her ask for help to a person in the outside by pressing a key and send a letter data to a person in the outside by using a keyboard. Through this system, it is possible to send a voice or data between the underwater and the outside and it is available to a diver or skin scuba diver.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.286-291
• /
• 2020

In this paper, we propose a system that recommends music through tempo-oriented music classification and sensor-based human activity recognition. The proposed method indexes music files using tempo-oriented music classification and recommends suitable music according to the recognized user's activity. For accurate music classification, a dynamic classification based on a modulation spectrum and a sequence classification based on a Mel-spectrogram are used in combination. In addition, simple accelerometer and gyroscope sensor data of the smartphone are applied to deep spiking neural networks to improve activity recognition performance. Finally, music recommendation is performed through a mapping table considering the relationship between the recognized activity and the indexed music file. The experimental results show that the proposed system is suitable for use in any practical mobile device with a music player.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.451-456
• /
• 2018

UAComm (Underwater Acoustic Communication) is an active research area, and many experiment has been performed to develop UAComm system. In this paper, we investigate the possibility of modifying and applying VirTEX (Virtual Time series EXperiment) to medium long range MIMO (Multiple-Input Multiple-Output) UAComm of about 20 km range for the analysis and performance prediction of UAComm system. Since VirTEX is a time-domain simulator, the generated time series can be used in HILS (Hardware In the Loop Simulation) to develop UAComm system. The developed package is verified through comparing with the sea-going FAF05 (Focused Acoustic Field 2005) experimental data. The developed simulator can be used to predict the performance of UAComm system, and even replace the expensive sea-going experiment.