• 공업화학
• /
• 제10권4호
• /
• pp.592-598
• /
• 1999

건축용 외장재로 사용되는 인조석은 혼합수, 시멘트, 석분, 경량골재를 사용하여 만들어지는데, 본 연구에서는 인조석의 제조단가를 낮추고 물성을 향상시키기 위하여 ${\beta}$-NSF계 계면활성제와 빈졸계 계면활성제를 사용하였다. 본 연구를 통해 ${\beta}$-NSF계와 빈졸계 계면활성제의 최적 배합비가 1.0 wt %와 0.1 wt % 됨을 도출하였고, 새로 개발된 인조석은 기존의 인조석에 비하여 물성이 약 20 wt 증가하고, 동결융해 저항성이 300% 증가하였다. 그러나, 제조가격은 기존의 제품에 비해 30% 이상 감소된다.

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.16-23
• /
• 2011

Since the first lighting light source was invented, lighting has turned into superior-quality lighting considering the amenity of occupants, and the characteristics of a light source has developed rapidly. So this research confirmed the lighting performance of a dimmer control system and an ON-OFF control system via the existing light source, and analyzed the basic lighting environment of Permanent Supplementary Artificial Lighting of Interiors(PSALI) through the physical comparison and evaluation of a LED lamp substituted for a fluorescent lamp used in a dimmer control system, showing that the lighting physical quantity characteristics of an ON-OFF control system and a dimmer control system are similar to each other and that they are effective in terms of energy saving. Besides, it was shown that introducing a LED light source to a dimmer control system improves lighting environments and largely reduces energy consumption.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.591-598
• /
• 1998

Light intensity and spectral characteristics of different types of fluorescent lamps were tested to investigate their possibility as the artificial lighting sources for the close illumination applied in the transplant production factory. Photosynthetic photon flux densitiy(PPF), illuminance and irradiance for all lamps decreased logarithmically with an increase of the vertical distance from the lighting source. The fluorescent lamp specially designed plant growth (PG lamp) showed a maximum spectral irradiance at the wavelength of 660nm. However, it showed lower irradiance than that of a standard fluorescent lamp at the range of wavelength between 500 and 600nm. On the other hand, PG lamp showed higher PPF and lower illuminance than those of the standard fluorescent lamp. The maximum peak of spectral characteristics for both of the single and twin three-bind fluorescent lamps was shorn at the wavelength of 545m and the next peaks were shown at the wavelength of 610nm and 435nm, respectively. Since the red fluorescent lamp has a narrower peak at the wavelength of 660nm, it may be useful for the supplementary red lighting. For three of standard, single three-band and twin three-band fluorescent lamps, the values of conversion factor for converting illuminance to PPF fell within the narrow range from 76 to 791x/$\mu$molㆍm$^{-2}$ ㆍs$^{-l}$ . However, for PG lamp, it was 29.71x/$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$. Also, the values of conversion factor for converting PPF to irradiance of fluorescent lamp used in this study ranged between 4.85 and 5.34$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$/Wㆍm$^{-2}$ .

• 미생물학회지
• /
• 제12권2호
• /
• pp.53-58
• /
• 1974

A number of antibiotics and organic compounds were tested for their effect on the multoplication of tobacco mosaic virus(TMV) in floating leaf discs. 1)Among six antibiotics tested, kanamycin sulfate showed 24% or more inhibition to TMV multiplication under these experimental conditions. Aureomycin hydrochloride and chloramphenicol showed 19% and 14% inhibition respectively. 2)For screening of organic compounds two environments were used, a diffuse day- light environment (25 foot-candles and laboratory temperature) and an artificial light environment for 12 hours per day(300 foot-candles at 4 to $5^{\circ}C above laboratory temperature). A wide range of organic compounds increased virus multoplication in the diffuse daylight environment but had less effect, or ingibited virus multiplication, in the artificial light environment. 3)The following compounds were among the most effective in increasing TMV multiplication: glucose-1-phosphate, L-aspartic acid, glucose, and 5-bromouracil. The following compoumds were most effective in inhibiting TMT multiplication: thiouracil, uracil, DL-isoleucine, L-leucine, and zinc chloride.

• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.215-222
• /
• 2022

Artificial neuromorphic devices are considered the key component in realizing energy-efficient and brain-inspired computing systems. For the artificial neuromorphic devices, various material candidates and device architectures have been reported, including two-dimensional materials, metal-oxide semiconductors, organic semiconductors, and halide perovskite materials. In addition to conventional electrical neuromorphic devices, optoelectronic neuromorphic devices, which operate under a light stimulus, have received significant interest due to their potential advantages such as low power consumption, parallel processing, and high bandwidth. This article reviews the recent progress in optoelectronic neuromorphic devices using various active materials such as two-dimensional materials, metal-oxide semiconductors, organic semiconductors, and halide perovskites

• 대한임베디드공학회논문지
• /
• 제17권4호
• /
• pp.229-237
• /
• 2022

Motion recognition is very useful for implementing an intuitive HMI (Human-Machine Interface). In particular, hands are the body parts that can move most precisely with relatively small portion of energy. Thus hand motion has been used as an efficient communication interface with other persons or machines. In this paper, we design and implement a light-weight ANN (Artificial Neural Network)-based hand motion recognition using a state-of-the-art flex sensor. The proposed design consists of data collection from a wearable flex sensor, preprocessing filters, and a light-weight NN (Neural Network) classifier. For verifying the performance and functionality of the proposed design, we implement it on a low-end embedded device. Finally, our experiments and prototype implementation demonstrate that the accuracy of the proposed hand motion recognition achieves up to 98.7%.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.86-96
• /
• 2003

This study aims to improve system for the enlargement of artificial planting spaces through grasp several problems about it and related system in domestic and foreign. In order to improve system for the extension of artificial planting spaces in the urban area following plans have been presented. First, it is necessary to launch various bonus, subsidies and incentives for making planting spaces in the urban area. Second, subdivision of related regulations for using diverse planting methods is needed. Third, government has to take the initiative in pushing on with planting of artificial spaces. Fourth, it is necessary to development of concrete techniques. Finally, it is desirable to plant artificial spaces which animal and plant can live, low effect to environment and material can be circulated although the value of plantation as a meaning of simple green also are admitted. Planting of artificial spaces should be introduced in a positive light for conservation and restoration of urban ecosystem.

• 한국환경농학회지
• /
• 제19권4호
• /
• pp.284-293
• /
• 2000

일반 주거환경 또는 재배시설 내의 공기오염물질인 농약 및 병원성 미생물을 인위적으로 제거하기 위해서 자연광 또는 인공광조건하에서 몇몇 감광제 (PS)/광촉매 (PC)에 의한 광분해 촉진효과와 미생물의 살균효과 시험을 수행하였다. 광촉매로는 반도체 물질인 PC-1과 PC-2, 그리고 산화제로 사용되는 PC-3, PC-4, PC-5 및 PC-6과 감광제로 PS-7과 PS-8을 선발하였다. Dichlorvos의 경우에는 자연광과 인공광 조건하에서 광촉매 무처리구에 비해 각각의 광촉매가 처리된 모든 처리구에서 4배 이상의 광분해 촉진효과를 보였고, methyl tert-butyl ether의 경우에는 단지 광촉매 PC-1 처리구만이 광촉매 무처리구에 비해 약 17배 이상의 분해 촉진효과를 보였다. 또한 procymidone의 경우에도 PC-1, PC-6 및 PS-8에 의한 광분해가 약 3배 이상 촉진되었다. 공기 중의 미생물을 제거하기 위한 예비시험에서는 Pseudomonas putida, Phytophthora capsici 및 Salmonella typhimurium 현탁액에 각각 광촉매 PC-1을 첨가하고 인공광을 조사함으로서 미생물의 생육이 저해됨을 확인할 수 있었다. 또한 평판배지에 도말된 Salmonella typhimurium은 광촉매 PC-1의 주변에서 미생물 생육이 저해됨을 보였다. 이상의 결과에서 볼 때 광조건 하에서 감광제/광촉매를 이용한 고등산화기술은 농약을 비롯한 여러 환경 오염물질을 제거하여 재배시설 내의 작업자와 일반 대중의 환경오염원에 대한 노출을 예방할 수 있을 것으로 기대된다.

• 한국통신학회논문지
• /
• 제36권11B호
• /
• pp.1394-1402
• /
• 2011

본 논문은 포물 반사경 방식 및 프레넬 렌즈 방식을 이용한 태양광 집광장치 및 이의 응용에 관한 것이다. 본 시스템은 대구경 반사경과 더불어 2차 광학계를 도입하여 광섬유로 입사되는 빛의 입사각을 광섬유의 개구수보다 작게 함으로써 집광효율을 극대화하였다. 또한 광섬유 단면에 입사하는 빛의 에너지 밀도를 낮게 하기 위해 광섬유 다발 직경 크기와 동일한 평행광이 광섬유로 입사되게 함으로써 반사경을 사용한 집광 시 문제가 되는 열발생 문제를 별도의 냉각장치 없이 근원적으로 차단하였다. 최근 각광받고 있는 식물공장에 주로 쓰이는 LED와 같은 인공광원 대신 본 연구에서 개발한 태양광 집광장치를 식물공장에 적용하여 인공조명과 태양광의 혼합조명장치를 통해 식물을 재배하였다. 그 결과 낮 시간대에 인공조명에 소요되는 전기에너지를 대폭 절감할 수 있었다. 혼합조명장치에서는 조도센서를 활용하여 항상 일정량의 빛이 식물에 제공되도록 LED등의 밝기를 조절하였다. 하루 10시간 기준으로 100형 규모의 식물공장에 태양광 채광시스템을 적용할 경우 한 달에 약 28,080KWh의 에너지 절감효과가 있다.