• 한국재료학회지
• /
• 제15권9호
• /
• pp.555-559
• /
• 2005

An oxygen free copper severely-deformed by eight cycles (an equivalent strain of $\~6.4$) of accumulative roll-bonding (ARB) was annealed at various temperatures ranging from 100 to $300^{\circ}C$. The annealed copper was characterized by transmission electron microscopy (TEM) and tensile & hardness test. TEM observation revealed that the ultrafine grains developed by the ARB still remained up to $150^{\circ}C$, however above $200^{\circ}C$ they were replaced by equiaxed and coarse grains due to an occurrence of the static recrystallization. Tensile strength and hardness of the copper decreased slightly with the annealing temperature up to $150^{\circ}C$, however they dropped largely above $200^{\circ}C$. Annealing characteristics of the copper were compared with those of a commercially pure aluminum processed by ARB and subsequently annealed.

• 한국중재학회지:중재연구
• /
• 제23권2호
• /
• pp.37-54
• /
• 2013

This article focuses on integrating institutional mediation systems, especially the analysis of the leading ADR operation. Mediation is a process in which an impartial third party, a mediator, facilitates the resolution of a dispute by promoting voluntary agreements by the parties to the dispute. A mediator facilitates communications, promotes understanding, focuses the parties on their interests, and seeks agreement. These standards give meaning to this definition of mediation. Standard mediation clauses are construed as broadly as possible, and mediation is compelled unless it may be said with positive assurance that the mediation process is not susceptible to an interpretation that covers the asserted dispute. Performing the conflicts check early in the process helps in eliminating any awkwardness or delays caused by making disclosures after mediation commences. Mediator impartiality is central to the mediation process. A mediator should mediate only those matters in which she or he can remain impartial and evenhanded. If at any time the mediator is unable to conduct the process in an impartial manner, the mediator is obligated to withdraw.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.592-597
• /
• 2006

A deoxidized low-phosphorous (DLP) copper was processed by accumulative roll-bonding (ARB) for ultra grain refinement and high strengthening. Two copper sheets 1 mm thick, 30 mm wide and 300 mm long are first degreased and wire-brushed for sound bonding. The sheets are then stacked to each other, and roll-bonded by about 50% reduction rolling without lubrication at ambient temperature. The bonded sheet is then cut to the two pieces of same dimensions and the same procedure was repeated to the sheets up to eight cycles (${\varepsilon}{\sim}6.3$). TEM observation revealed that ultrafine grains were developed after the 4th cycle, and their size decreased at higher cycles. Tensile strength of the copper increased with the equivalent strain, and it reached 547 MPa which was 3 times higher than that of the initial material. It is concluded that the ARB process is an effective method for high strengthening of the DLP copper.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.585-590
• /
• 2014

Microstructural evolution in the thickness direction of an oxygen free copper processed by accumulative rollbonding (ARB) is investigated by electron back scatter diffraction (EBSD) measurement. For the ARB, two copper alloy sheets 1 mm thick, 30 mm wide and 300 mm long are first degreased and wire-brushed for sound bonding. The sheets are then stacked and roll-bonded by about 50% reduction rolling without lubrication at an ambient temperature. The bonded sheet is then cut to the two pieces of the same dimensions and the same procedure was repeated on the sheets up to eight cycles. The specimen after 1 cycle showed inhomogeneous microstructure in the thickness direction so that the grains near the surface were finer than those near the center. This inhomogeneity decreased with an increasing number of ARB cycles, and the grain sizes of the specimens after 3 cycles were almost identical. In addition, the aspect ratio of the grains decreased with an increasing number of ARB cycles due to the subdivision of the grains by shear deformation. The fraction of grains with high angle grain boundaries also increased with continuing process of the ARB so that it was higher than that of the low angle grain boundaries in specimens after 3 cycles. A discontinuous dynamic recrystallization occurred partially in specimens after 5 cycles.

• 한국중재학회지:중재연구
• /
• 제24권2호
• /
• pp.161-181
• /
• 2014

This thesis, which mainly focuses on the characteristics of the Chinese arbitration system, will mainly deal with three characteristics and analyze the causes that directly or indirectly influence them. The first characteristic is China does not recognize ad hoc arbitration. Ad hoc arbitration is the initial form of arbitration, and it occupies an important position in many countries; however, China's judicial system does not recognize it. There are many disadvantages for building a system of ad hoc arbitration in China; i. e., the arbitration system in China is undeveloped and shot-time established, and it lacks social and civil society basis, along with a credit system, which the Western ad hoc arbitration relies on. The second characteristic is the existence of excessive judicial supervision and control over arbitration in China. Judicial supervision over arbitration has been the customary practice in each country of the modern world, but sharp variation exists in the legal stipulations and the courts' attitude toward the standard to be applied in the supervision over arbitration. In China, there has always been a controversy over judicial supervision, and the standards applied in the supervision over arbitration by courts in different regions are less than identical. The last characteristic is the existence of a combination of mediation with arbitration, which is called Arb-Med in China. Such means that in the process of arbitration, the arbitrator may conduct mediation proceedings for the case it is handling if both parties agree to do so. Under the Chinese law, Arb-Med may lead to a binding and enforceable outcome. However, it has several legal disadvantages and almost no country adopts this system. China still insists that this system will go on because Arb-Med was first made in China, and its effect was proven through long-time practice in CIETAC.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1525-1526
• /
• 2011

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.53-58
• /
• 2006

버텍스 쉐이더는 fixed function T&L(Transform and Lighting) 엔진의 유연성을 향상시키고, 이전보다 다양한 3D 그래픽 효과를 표현하기 위하여 설계되었다. 본 논문의 쉐이더는 DirectX 8.1 의 Vertex Shader 1.1 과 OpenGL ARB에 기초하여 설계하였다. 버텍스 쉐이더는 벡터 연산을 위하여 4개의 ALU로 구성된다. 작은 면적의 저전력 설계를 위하여 32비트 부동소수점 데이터 형식을 24비트 데이터 형식으로 대체하였다. 버텍스 쉐이더 코어의 동작 검증을 위하여 Xilinx Virtex2 300M gate 모듈을 사용하였다. 시납시스 합성결과 TSMC 0.13um 공정에서 115MHz의 주파수로 동작가능하고, 12.5M Polygons/sec 의 연산성능을 보였다. 버텍스 쉐이더 코어의 면적은 동일 공정에서 11만 게이트를 차지한다.

• 한국정밀공학회지
• /
• 제34권2호
• /
• pp.77-81
• /
• 2017

CP (Commercially Pure) titanium has been widely used in various industries such as in energy plants and bio-materials because of an excellent corrosion resistance and its non-toxicity to the human body. But there are limitations for usage as structural materials due to low strength. The tensile properties of CP titanium could be improved by microstructure refinement such as in a SPD (Severe Plastic Deformation) process. However, high strengthening of CP titanium wire is impossible by SPD processes like ECAP (Equal Channel Angular Pressing), HPT (High-Pressure Torsion), and the ARB (Accumulative Roll Bonding) process. The study purposes are to increase the strength of CP titanium wire by optimization of the cold drawing process and the harmonization with mechanical properties by heat treatments for the next forming process. The optimization process was investigated with regard to the design of drawing dies and the reduction ratio of cross sections. The elongations of high strength CP titanium were controlled by heat treatment.

• 한국중재학회지:중재연구
• /
• 제21권3호
• /
• pp.55-87
• /
• 2011

This paper is to illustrate a variety of court-annexed ADR programs and vindicate its implications of court-annexed ADR in United States. It has been almost three decades since Frank Sender articulated his vision of the multi-door courthouse. The court-annexed ADR originated from the concept of multi-door court house. Professor Sander argued that the court must transform from the court that provides litigation, only one type of dispute resolution, to the multi-door courthouse which provides a variety of dispute resolution methods including a number of ADR programs. The types of court-annexed ADR on which this paper focus are court-annexed mediation, court-annexed arbitration, mini trial, early neutral evaluation(ENE), summary jury trial, rent-a-judge, and med-arb in United States. The findings of this paper is as follows. First, the ADR movement is the irreversible and dominant phenomenon in the US court. The motivation of incorporating ADR into court is to reduce the cost of court to handle the civil disputes and to eliminate the delay of litigation process in the court. At the same time, a couple of studies of ADR revealed that the ADR program satisfied users of ADR. Second, the landscape of ADR has not been fixed. In 1970's, the court-annexed arbitration has been popular. In 1980's, the diverse kinds of ADR programs were introduced into the federal court as well as state courts, such as mini trial, early neutral evaluation(ENE), summary jury trial, and court-annexed mediation. But in 2000s, the court-annexed mediation has been the dominant type of ADR in United States. Third, the each type of ADR program has its own place for the dispute resolution. Since Korean society enters into the stage in which diverse kind of disputes occur in the areas of environment, construction, medicare, etc, it is desirable to take into consideration of the introduction of ADR to dispute resolution in Korea.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.751-754
• /
• 2005

In this paper, we designed a vertex shader for mobile devices. Proposed Vertex shader is compatible with the OpenGL ARB & DirectX 8.0 Vertex Shader 1.1 and is organized of modified IEEE-754 24 bits float point SIMD architecture. All float point arithmetic unit process 1 cycle operation with 100Mhz frequency more. We made a vertex shader demo system with Xilinx-Virtex II and get synthesis result that confirm 11M gates size at TSMC 0.13um @ 115MHz.