• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.568-575
• /
• 2020

Ultrasound has been widely used in various industrial fields. One of challenging application areas is cooling microelectronics. Ultrasonic cooling systems can work with air, argon (Ar) and nitrogen (N₂) instead of conventional refrigerant such as freon gas, which can cause global warming. Furthermore, ultrasonic systems do not have moving parts, thus high durability can be obtained. So it is necessary to develop ultrasonic cooling systems due to environmental issues and durability points. In this paper, the design and fabrication processes are explained. When designing the system, a feasibility test was performed with a prototype cooler. Based on the result, finite element analysis with ANSYS software was performed. The predicted anti-resonance frequency for a piezoelectric actuator was 34.8 kHz, which was in good agreement with the experimental result of 34.6 kHz with 0.6% error. In addition, the predicted anti-resonance frequency for the ultrasonic waveguide was 39.4 kHz, which also agreed well with the experimental value of 39.8 kHz with 1.0% error. Based on these results, the developed ultrasonic waveguide might be applicable in microchip cooling.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.94-100
• /
• 1999

Mercurous chloride($Hg_2Cl_2$) crystals hold promise for many acousto-optic and opto-electronic applications, which are prepared in closed ampoules by the physical vapor transport(PVT) growth methods. The thermal boundary conditions established by imposing different temperature on sidewalls of the enclosure cause simultaneous horizontal and vertical convectie flow in the PVT processes of$Hg_2Cl_2$ . It is found that for the ratios of horizontal to vertical thermal Rayleigh numbers$Ra_H/Ra{\ge}1.5$, the convective flow structure changes from multicellular to unicellular for the base parametric state of Ra=($2.79{\times}10^4$) , Pr=0.91, Le=1.01, Pe=4.60, Ar=0.2 and$C_V =1.01$. For the $\Delta T^{*}_H$ greater than 0.3, the $$\mid$U$\mid$_{max}$is increased with increasing $\Delta$ T^{*}_H$ and decreasing the aspect ratio. For the aspect ratios ranging from 0.1 to 1.0, there is a direct and linear relationship between $$\mid$U$\mid$_{max}$ and $\sqrt{{\Delta}T^_H\;^{\ast}}$.A decrease in the aspect ratio destabilizes the convective flow and results in an increase of the magnitude of convection in the crystal growth reactor. The vertical gradient tends to destabilize the convective flow which leads to oscillations, whereas the horizontal gradient stabilizes the convection.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.674-682
• /
• 2005

The Samsung mine is located in Jeongsan-myeon, Cheongyang-gun, Chungcheongnam-do, and is produces sericite ores. The purpose of this study is to investigate the geology and mineralogy of sericite one and its host-rock together with the alteration processes and age of sericitization. Geological survey, polarizing microscopy, X-ray powder diffraction, electron microprobe analysis, X-ray fluorescent analysis, differential thermal analysis, and K/Ar isotope study have been employed for this study. The mine area is composed of Precambrian granite-gneiss and mica schist, and also Jurassic biotite granite. Serictization has occured within the granite-gneiss, and is interpreted to be formed by hydrothermal alteration. The sericite was formed by the breakdown of orthoclase, plagioclase, and biotite, respectively. With sericitization intensity increase, $SiO_2\;and\;Na_2O$ contents are decreased, while $Al_2O_3\;and\;K_2O$ increased. The formation age of sericite has been determined to be Jurassic, which corresponds well to the intrusion age of the biotite granite nearby.

• Economic and Environmental Geology
• /
• v.27 no.4
• /
• pp.345-361
• /
• 1994

Lens shaped titanomagnetite ore bodies in the Soyeonpyeong iron mine are embedded in amphibolites, which were intruded into Precambrian metasediments such as garnet-mica schist, marble, mica schist, and quartz schist. Mineral chemistry, K-Ar dating and hydrogen and oxygen stable isotopic analysis for the amphibolites and titanomagnetite ores were conducted to interpret petrogenesis of amphibolite and ore genesis of titanomagnetite iron ore deposits. Amphibolites of igneous origin have unusually high content of $TiO_2$, ranging from 0.94 to 6.39 wt.% with an average value of 4.05 wt.%. REE patterns of the different lithology of the amphibolite show the similar trend with an enrichment of LREE. Amphiboles of amphibolites are consist mainly of calcic amphiboles such as ferro-hornblende, tschermakite, ferroan pargasite, and ferroan pargasitic hornblende. K-Ar ages of hornblende from amphibolite and gneissic amphibolite were determined as $440.04{\pm}6.39Ma$ and $351.03{\pm}5.21Ma$, respectively. This indicates two metamorphic events of Paleozoic age in the Korean peninsula which are correlated with Altin orogeny in China. The titanomagnetite mineralization seems to have occurred before Cambrian age based on occurrence of orebodies and ages of host amphibolites. The Soyeonpyeong iron ores are composed mainly of titanomagnetite, ilmenite, and secondary minerals such as ilmenite and hercynite exsolved in titanomagnetite. The temperature and the oxygen fugacity estimated by the titanomagnetite-ilmenite geothermometer are $500{\sim}600^{\circ}C$ (ave. $550^{\circ}C$) and about $2{\pm}10^{-23}bar$, respectively. Hornblendes from ores and amphibolites which responsible for magnetite ore mineralization, have a relatively homogeneous isotopic composition ranging from +0.8 to +3.9 ‰ in ${\delta}^{18}O$ and from -87.8 to -113.3 ‰ in ${\delta}D$. The calculated oxygen and hydrogen isotopic compositions of the fluids which were in equilibrium with hornblende at $550^{\circ}C$, range from 2.8 to 5.9‰ in ${\delta}^{18}O_{H2O}$ and from -60.41 to -81.31 ‰ in ${\delta}D_{H2O}$. The ${\delta}^{18}O_{H2O}$ value of magnetite ore fluids are in between +6.4 to + 7.9 ‰. All of these values fall in the range of primary magmatic water. A slight oxygen shift means that $^{18}O$-depleted meteoric water be acted with basic fluids during immiscible processes between silicate and titaniferous oxide melt. Mineral chemistry, isotopic compositions, and occurences of amphibolites and orebodies, suggest that the titanomagnetite melt be separated immisciblely from the titaniferous basic magma.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.42-46
• /
• 2016

In LCD Display or semiconductor manufacturing processes, the anti-static technology of glass substrates and wafers becomes one of the most difficult issues which influence the yield of the semiconductor manufacturing. In order to overcome the problems of wafer surface contamination various issues such as ionization in decompressed vacuum and inactive gas(i.e. $N_2$ gas, Ar gas, etc.) environment should be considered. Soft X ray radiation is adequate in air and $O_2$ gas at atmospheric pressure while UV radiation is effective in $N_2$ gas Ar gas and at reduced pressure. At this point of view, the "vacuum ultraviolet ray ionization" is one of the most suitable methods for static elimination. The vacuum ultraviolet can be categorized according to a short wavelength whose value is from 100nm to 200nm. this is also called as an Extreme Ultraviolet. Most of these vacuum ultraviolet is absorbed in various substances including the air in the atmosphere. It is absorbed substances become to transit or expose the electrons, then the ionization is initially activated. In this study, static eliminator based on the vacuum ultraviolet ray under the above mentioned environment was tested and the results show how the ionization performance based on vacuum ultraviolet ray can be optimized. These vacuum ultraviolet ray performs better in extreme atmosphere than an ordinary atmospheric environment. Neutralization capability, therefore, shows its maximum value at $10^{-1}{\sim}10^{-3}$ Torr pressure level, and than starts degrading as pressure is gradually reduced. Neutralization capability at this peak point is higher than that at reduced pressure about $10^4$ times on the atmospheric pressure and by about $10^3$ times on the inactive gas. The introductions of these technology make it possible to perfectly overcome problems caused by static electricity and to manufacture ULSI devices and LCD with high reliability.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.479-486
• /
• 2009

In natural environments, manganese (Mn) exists in the valence of +2, +3, and +4 and plays a pivotal role as a strong oxidant or reductant in the geochemical cycles of elements. Especially, Mn forms varying (oxyhydr)oxides. The oxidation state of structural Mn is characteristic to each oxide and is one of the most important factors controlling its geochemical behaviors such as solubility, sorption capacity, and redox potential. Therefore, it is important to elucidate processes governing Mn oxidation state in predicting the fate and transport of many redox sensitive elements in the environment. X-ray photoelectron spectroscopy (XPS) is a very useful method to determine the oxidation state of various elements in solid phases. In this study, the oxidation states of structural Mn in MnO, $Mn_2O_3$, $MnO_2$ were assessed based on the binding energy spectra of $Mn2p_{3/2}$ and Mn3s using XPS and were compared with those reported elsewhere. $Mn2p_{3/2}$ binding energies were determined as 640.9, 641.5, 641.8 eV for MnO, $Mn_2O_3$, $MnO_2$, respectively, which indicates that the binding energy increased with increasing Mn oxidation state. It was also noted that Ar etching may cause changes in electronic structure configuration on surface of the original sample.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.6
• /
• pp.243-250
• /
• 2021

With the increased development of 3D VR applications augmented by recent VR/AR/MR technologies and by the advance of 3D devices, interchangeability and portability of 3D data have become essential. 3D files should be processed in a standard data format for common usage between applications. Providing standardized libraries and data structures along with the standard file format means that a more efficient system organization is possible and unnecessary processing due to the usage of different file formats and data structures depending on the applications can be omitted. In order to provide the function of using a common data file and data structure, this research is intended to provide a programming binding tool for generating and storing standardized data so that various services can be developed by accessing the common 3D files. To achieve this, this paper defines a common data structure including classes and functions to access X3D files with a standardized scheme using the Python programming language. It describes the implementation of a Python language binding viewer, which is an X3D VR viewer for rendering standard X3D data files based on the language binding interface. The VR viewer includes Python based 3D scene libraries and a data structure for creation, modification, exchange, and transfer of X3D objects. In addition, the viewer displays X3D objects and processes events using the libraries and data structure.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.63-73
• /
• 2008

Recent years have seen an explosion of interest in interactive agents motivating human learners to engage in edutainment systems which are designed to be entertaining and educational at the same time. Especially, work on socio-emotional processes has focus on understanding of human's social behavior in training and entertainment a applications. In contrast with work on social emotion, where research groups have developed detailed models of emotional processes, models of personality have emphasized shallow surface behavior. Here, we build on computational appraisal models of emotion to better characterize dispositional differences in how people come to understand social situations. Known as explanatory style, this dispositional factor plays a key role in social interactions and certain socio-emotional disorders, such as depression. Building on appraisal and attribution theories, we model key conceptual variables underlying the explanatory style, and enable agents to exhibit different explanatory tendencies with respect to their personalities. Furthermore, we developed an interactive AR agent based on our framework and applied it into an interactive teaming system that allows participants to explore individual differences in the explanation of social events, with the goal of encouraging the development of perspective laking and emotion-regulatory skills.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1272-1278
• /
• 2012

The micro barrier rip array structures have been applied in a variety of areas including as privacy films, micro heat sinks, touch panel and optical waveguide. The increased aspect ratio (AR) of barrier rip array structures is required in order to increase the efficiency and performance of these products. There are several problems such as burr, defect of surface roughness and deformation and breakage of barrier rip structure with machining high-aspect ratio micro barrier rip array structure using orthogonal cutting method. It is essential to develop technological methods to solve these problems. The optimum machining conditions for machining micro barrier rip array structures having high-aspect ratio were determined according to lengths ($200{\mu}m$ and $600{\mu}m$) and shape angles ($2.89^{\circ}$ and $0^{\circ}$) of diamond tool, overlapped cutting depths ($5{\mu}m$ and $10{\mu}m$), feed rates (100 mm/s) and three machining processes. Based on the optimum machining conditions, micro barrier rib array structures having aspect ratio 30 was machined in this study.

• Journal of Korean Clinical Nursing Research
• /
• v.20 no.3
• /
• pp.384-394
• /
• 2014

Purpose: To improve professional intensive care by analyzing admission causes, causes of death, disease conditions, and treatment processes in patients with hematological malignancies admitted to intensive care units (ICUs) in South Korea. Methods: This was a retrospective study approved by IRB, and conducted on admission with 559 adults, in the hematology ICU of a hospital located in Seoul. The study was carried out from April 2009 to March 2012. Data were analyzed using SAS. Results: Pneumonia was the most frequent cause of ICU admission and death, followed by sepsis. The condition at discharge was death (53.6%), recovery (39.9%), or hopeless (5.1%). Mortality of patients in states of incomplete remission was higher than that of patients with complete remission and of patients with multiple myeloma, severe aplastic anemia, and lymphoma. Conclusion: Results show that pneumonia and sepsis are the most frequent causes of ICU admission and for the death of patients with hematological malignancies. The most frequent status at discharge of patients with hematological malignancies was death (53.6%), with mortality of patients at Incomplete Remission status, of mechanically ventilated patients, and of patients on continuous renal replacement therapy (CRRT) being higher than others.