• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.199-201
• /
• 2022

• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.32-39
• /
• 2021

We propose a three-dimensional (3D) streaming system based on a lamina display that can convey field information in real-time by creating floating 3D images that can satisfy the accommodation cue. The proposed system is mainly composed of three parts, namely: a 3D vision camera unit to obtain and provide RGB and depth data in real-time, a 3D image engine unit to realize the 3D volume with a fast response time by using the RGB and depth data, and an optical floating unit to bring the implemented 3D image out of the system and consequently increase the sense of presence. Furthermore, we devise the streaming method required for implementing augmented reality (AR) images by using a multilayered image, and the proposed method for implementing AR 3D video in real-time non-face-to-face communication has been experimentally verified.

• 한국컴퓨터정보학회논문지
• /
• 제24권1호
• /
• pp.73-83
• /
• 2019

In this paper, we propose the augmented reality(AR) based driving navigation based on robust lane detection method to dynamic environment changes. The proposed technique uses the detected lane position as a marker which is a key element for enhancing driving information. We propose Symmetrical Local Threshold(SLT) algorithm which is able to robustly detect lane to dynamic illumination environment change such as shadows. In addition, by using Morphology operation and Connected Component Analysis(CCA) algorithm, it is possible to minimize noises in the image, and Region Of Interest(ROI) is defined through region division using a straight line passing through several vanishing points We also propose the augmented reality aided visualization method for Interchange(IC) and driving navigation using reference point detection based on the detected lane coordinates inside and outside the ROI. Validation experiments were carried out to assess the accuracy and robustness of the proposed system in vairous environment changes. The average accuracy of the proposed system in daytime, nighttime, rainy day, and cloudy day is 79.3% on 4600 images. The results of the proposed system for AR based IC and driving navigation were also presented. We are hopeful that the proposed research will open a new discussion on AR based driving navigation platforms, and thus, that such efforts will enrich the autonomous vehicle services in the near future.

• 한국광학회지
• /
• 제12권2호
• /
• pp.129-134
• /
• 2001

본 논문에서는 일반적인 OTDR 기술로 WDM 전송시스템의 감시를 수행하는 새로운 방법을 제안하였다. 제안된 감시 방법은 전송로에 포함된 EDFA의 구조를 광회전기(optical circulator)와 FBG(Fiber Bragg Grating)를 이용하여 OTDR 광펄스의 파장에서만 양방향 전송이 가능하도록 변경하고, 전송 신호의 역방향으로 OTDR 광펄스를 삽입함으로써 EDFA의 교차이득변조에 의한 신호왜곡을 분산시켜 신호전송과 전송로 감시를 동시에 수행하는 것이다. 이 감시 방법의 타당성을 검증하기 위해 제안된 구조로 변경된 EDFA가 포함된 320km 길이의 8 채널 WDM 광전송 시스템을 구축하고 신호전송과 동시에 전송로 감시를 수행한 결과를 보였으며, 이때 전송로 감시로 인한 전송 신호 채널의 power penalty를 BERT로 측정하여 그 값이 0.3dB이하로 매우 작음을 보였다.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.407-410
• /
• 2012

The properties of Al-doped ZnO (AZO) films were investigated as a function of H2/(Ar + H2) gas ratio using an AZO (2 wt% Al2O3) ceramic target in a radio frequency (RF) magnetron sputtering system. The deposition process was done at 200 ℃ and in 2 × 10-2Torr working pressure and with various ratios of H2/(Ar + H2) gas. During the AZO film deposition process, partial H2 gas affected the AZO film characteristics. The electron resistivity (~ 9.21 × 10-4 Ωcm) was lowest and mobility (~17.8 ㎠/Vs) was highest in AZO films when the H2/(Ar + H2) gas ratio was 2.5%. When the H2/(Ar + H2) gas ratio was increased above 2.5%, the electron resistivity increased and mobility decreased with increasing H2/(Ar + H2) gas ratio in AZO films. The carrier concentration increased with increasing H2/(Ar + H2) gas ratio from 0% to 7.5%. This phenomenon was explained by reaction of hydrogen and oxygen and additional formation of oxygen vacancy. The average optical transmission in the visible light wavelength region over 90% and an orientation of the deposition was [002] orientation for AZO films grown with all H2/(Ar + H2) gas ratios.

• 대한전자공학회논문지SP
• /
• 제46권5호
• /
• pp.91-100
• /
• 2009

본 논문에서는 반 깜박임 선택 기법을 이용한 응시 상호작용(Gaze interaction) 방법과 이를 이용한 착용형 증강현실 시스템(Wearable Augmented Reality system)이 제안 된다. 응시 상호작용은 가장 쉽고 자연스러우며 빠른 방법이며, 광투과 HMD 기반의 착용형 AR 시스템에 매우 적합한 기법이다. 이 시스템은 사용자의 응시 좌표와 반 깜박임(Half blink)을 이식하여 사용자가 바라보고 있는 객체의 정보를 HMD에 출력한다. 이를 통해 마이더스 터치 문제(Midas touch problem)를 해결하여 사용자의 의도를 정확히 전달할 수 있게 된다. 제안된 상호작용법을 AR 주석(Annotation) 시스템에 적용, 구현하여 사용성을 평가하였고, 실험 결과를 통해 제안한 기법의 유용성을 검증하였다.

• 한국광학회지
• /
• 제9권6호
• /
• pp.380-384
• /
• 1998

최근 고출력 에너지를 가진 레이저가 개발됨에 따라 레이저에 사용되는 반사경은 높은 열충격에도 견디며 효율적으로 냉각되어야 하므로 열확산도가 큰 광학박막의 연구가 중요하다. 본 연구에서는 굴절률이 다른 두 물질 MgFz와 ZnS의 증착 속도를 10$\AA$/s, 20$\AA$/s로 하고, 증착시 기판온도를 5$0^{\circ}C$, 10$0^{\circ}C$, 15$0^{\circ}C$, 20$0^{\circ}C$로 각각 다르게 하여 2층의 무반사막을 증착한 후 광음향효과를 이용하여 박막면에 수직한 방향의열확산도를 측정하였다. 시편 설계시 각 물질의 광학적 두께는 광원인 Ar+ 레이저(λ=514.5 nm)광에 대하여 MgFz 는 5/4λ이고, ZnS 는 λ가 되도록 하였고, 제작된 시료에 입사하는 광의주파수를 변화시키며 시료에서 발생되는 광음향신호의 크기를 측정하여 증착조건이 다를 때의 열확산도를 구하였다. 그 결과 증착속도가 10$\AA$/s 일 때와 기판온도가 15$0^{\circ}C$일 경우에 열확산도가 가장 큰 값을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.309-311
• /
• 2003

The effects of etch parameters on dry etching of BLT thin films were investigated with ICP etch system in $Cl_2$/Ar and $BCl_2/Cl_2$/Ar gas. The etch rate and etch selectivity of BLT films were examined as a function of gas concentration, ICP power, bias power, and pressure. The maximum etch rates of 191.1 nm/min was obtained at the mixed etch condition of $BCl_3(20%)/Cl_2$/Ar, 700 W ICP RF power, 12 mTorr pressure and 400 W substrate RF power. As ICP power and rf power increased, the etch rate of BLT increased. As pressure increased, the etch rate of BLT decreased. The changes of radicals in both $Cl_2$/Ar and $BCl_3/Cl_2$/Ar plasma were measured with using optical emission spectroscopy (OES).

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.498-505
• /
• 1996

In the present work, we have developed the simulator to optimize the process conditions of the AR(antireflection) and HR(high-reflection) coatings for the high power laser diode. The simulator can run on the PC. After making the simple optical model, we establish the Maxwell equations for the model by the operator conversion. By using the Mathematica, we derive a matrix for the multilayer system by applying the equations to the model and optimize the AR and HR coating process conditions by obtaining the reflection rate from the matrix. We also prove the validity of the simulator by comparing the simulation with the characteristics of the laser diode which is AR and HR coated according to the optimized conditions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제35회 하계학술대회 초록집
• /
• pp.313-313
• /
• 2008