• Journal of Periodontal and Implant Science
• /
• v.53 no.2
• /
• pp.157-169
• /
• 2023

Purpose: The aim of this study was to evaluate the impact of polydeoxyribonucleotide (PDRN) on histologic outcomes when implant placement and lateral sinus floor elevation are performed simultaneously. Methods: Three bimaxillary premolars (P2, P3, and P4) were extracted from 4 beagle dogs 2 months before lateral sinus floor elevation. After lateral elevation of the sinus membrane, each sinus was allocated to either the test or control group. Sinuses underwent either 1) collagenated synthetic bone graft with PDRN following lateral sinus floor elevation (test group) or 2) collagenated synthetic bone graft without PDRN after lateral sinus floor elevation (control group). Eight weeks after the surgical procedure, all animals were euthanised for a histologic and histomorphometric assessment. Augmented height (AH), protruding height (PH), and bone-to-implant contact in pristine (BIC_p) and augmented (BIC_a) bone were measured. The composition of the augmented area, which was divided into 3 areas of interest located in coronal, middle and apical areas (AOI_C, AOI_M, and AOI_A), was calculated with 3 parameters: the area percentage of new bone (pNB), residual bone graft particle (pRBP), and fibrovascular connective tissue (pFVT). Results: AH, PH, BIC_p, BIC_a total, BIC_a coronal, and BIC_a middle values were not significantly different between sinuses in the control and test groups (all P>0.05). The BIC_a apical of sinuses in the test group (76.7%±9.3%) showed statistically higher values than those of sinuses in the control group (55.6%±22.1%) (P=0.038). pNB, pRBP, and pFVT showed statistically significant differences between the 2 groups in AOI_A (P=0.038, P=0.028, and P=0.007, respectively). pNB, pRBP, and pFVT in AOI_C and AOI_M were not significantly different between samples in the control and test groups (all P>0.05). Conclusions: The histologic findings revealed that lateral sinus floor elevation with PDRN might improve early new bone formation and enable higher bone-to-implant contact.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.518-519
• /
• 2016

AOI 검사기는 SMT 공정 상에서 PCB (printed Circuit Board) 상의 부품들을 카메라로 촬영하고 촬영된 영상을 2D 혹은 3D 형태의 이미지로 재구성하고 분석하여 이상 여무를 판단하는 장비다. 검사를 하고자 하는 PCB의 크기가 카메라가 촬영할 수 있는 영역 보다 큰 경우가 대부분이기 때문에 PCB 상에 마운트 되어 있는 부품들을 모두 촬영하기 위해서는 여러 차례 나누어 촬영해야 할 필요가 있으며 이 때문에 PCB 상에 촬영해야 하는 부품들을 가능한 FOV에 많이 포함될 수 있도록 여러 FOV 영역으로 나누고 이렇게 나누어진 FOV 영역들을 최적의 경로로 이동하며 촬영할 수 있도록 하기 위한 알고리즘이 필요하다. 기존 논문들은 대부분 이 문제를 해결하기 위한 알고리즘에 대해 다루어 왔다. 일반적으로 생산이 진행되는 시점에서는 검사해야 할 PCB에 대한 정보 (PCB의 크기, 부품의 위치, 크기, 종류 등)는 이미 정해져 있기 때문에 경로 계획 최적화 수행은 PCB 정보에 변동이 없다면 한차례만 하면 된다. 하지만 검사를 할 수 있도록 Teaching 하는 단계에서는 PCB 정보가 지속적으로 변경될 수 있으며 이에 따라 최적화를 여러 차례 수행해야 할 필요성이 있다. 최적화를 위한 처리 시간은 부품의 개수, PCB 상에서의 분포정도등에 따라 증가하기 때문에 PCB 정보가 변경될 때 마다 최적화를 수행하게 되면 비효율적으로 처리 시간이 증가하게 된다. 본 논문에서는 이 문제에 대해 연구하고 해결책을 제시하였다.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.146-154
• /
• 2021

Conspicuous consumption is often investigated in Korea and consumers purchase a product to publicly display economic power or social status. The existing studies argue that brand loyalty and luxury brand preferences escalate conspicuous consumption, and it is important to identify different visual perception to understand irrational consumers' behavior. Car emblem as brands' visual identity represents the brand's image, mission and message. Irrational consumers thus are expected have different visual perception to the emblem or logo. To understand the impact of irrational consumer behavior on visual perception, this study explored how brand loyalty and luxury brand preferences impact on the visual perception of car emblems between Korean domestic brand and imported brand. This study used eye tracking technology to measure the respondents' attention on an emblem of the cars. Eye tracking tools analyze fixations and measure the attention on a specific area of interests (AOI). This study explored the maintaining time and frequency on AOI, as well as explored the size of pupil to identify the respondents' attention on the AOI. In this experiment, the logos of domestic cars (i.e., Hyundai and Kia) and foreign cars (i.e., Mercedes-Benz and BMW) were swapped to see how irrational consumer behavior impact on visual perception of car emblem.

• Journal of the Korean earth science society
• /
• v.45 no.2
• /
• pp.121-135
• /
• 2024

This study examined the influence of near-surface atmospheric warming in the Arctic-East Asia region during spring (March-May) from 1991 to 2020 on the synoptic-scale meteorology of dust storm-induced dust days in Seoul, Korea, in response to the Arctic Oscillation. Increased springtime warming in the Arctic-East Asia region correlated with a reduction of six days in the occurrence of dust storm-induced dust days in Seoul, Korea, along with a decline in the intensity of these days by -1.6 ㎍ m^-3yr^-1 in PM₁₀ mass concentration. The declining number of dust storm-induced dust days in Korea during the 2010s was the result of synoptic-scale meteorological analysis, which showed increased high-pressure activity as indicated by the negative potential vorticity unit. Moreover, a distinct pattern emerged in the distribution of dust storm-induced dust days in Korea based on the Arctic Oscillation Index (AOI), showing an increase in negative AOI and a decrease in positive AOI. Although the northward shift of the polar jet weakened the southerly low-pressure system activity over Mongolia and northern China, a reinforced high-pressure system formed over the Chinese continent during dust-storm-induced dust days with a negative AOI. This resulted in both a decrease in the frequency of dust-storm-induced dust days and reduction in wind speeds, facilitating their transport from source regions to Korea. Conversely, on days with positive AOIs, an extensive warm and stagnant high-pressure system dominated mainland China, accompanied by further cooling of the northern segment of the polar jet. A notable decline in wind speed in the lower troposphere across the Mongolia-northern China-Korea region diminished the occurrence of dust storm-induced dust days and also weakened their long-range transport.

• The Optical Journal
• /
• s.154
• /
• pp.46-56
• /
• 2014

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.480-485
• /
• 2003

We Propose a Path planning method to reduce the Inspection time of AOI (automatic optical inspection) machines in SMT (surface mount technology) in-line system. Inspection windows of board should be clustered to consider the FOV (field-of-view) of camera. The number of clusters is desirable to be minimized in order to reduce the overall inspection time. We newly propose a genetic algorithm to minimize the number of clusters for a given board. Comparative simulation results are presented to verify the usefulness of proposed algorithm.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.96-104
• /
• 2006

We propose a path planning method to improve the productivity of AOI (automated optical inspection) machines in PCB (printed circuit board) assembly lines. The path-planning problem is the optimization problem of finding inspection clusters and the visiting sequence of cameras to minimize the overall working time. A unified method is newly proposed to determine the inspection clusters and visiting sequence simultaneously. We apply a hybrid genetic algorithm to solve the highly complicated optimization problem. Comparative simulation results are presented to verify the usefulness of the proposed method.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.59-65
• /
• 1992

In this study, new photosensitive polymers bearing acyloxyimino(AOI) group were prepared and the relationship between photochemical reactions of the polymers and changes of their physical properties was investigated. It was found that main reaction of these copolymers depended on the structure of polymer mainchain. From the view point of amino groups formation, acryl type polymers were superior to methacryl type polymers. On the other hand, in the case of mathacryl type polymers, mainchain scissions and formation of double bonds occurred very effectively. Applications of these copolymers to photofunctional polymers were also discussed.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.355-365
• /
• 2000

The interferometric correlation, or coherence, is calculated to measure the variance of the interferometric phase and amplitude within the neighbourhood of any location within the image at a result of SAR (Synthetic Aperture Radar) interferometric process which utilizes the phase information of the images. The coherence contains additional information that is useful for detecting point targets which change their location in an area of interest (AOI). In this research, a RGB colour composite image was generated with a intensity image (master image), a intensity change image as a difference between master image and slave image, and a coherence image generated as a part of SAR interferometric processing. We developed a technique performing detection of a point target movement using SAR interferometry and applied it to suitable tandem pair images of ERS-1 and ERS-2 as test data. The possibility of change detection of a point target in the AOI could be identified with the technique proposed in this research.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.109.2-109
• /
• 2001

In the PCB assembly lines, as components become more complex and smaller, the conventional inspection method using traditional ICT and function test show their limitations in application. The automatic optical inspection(AOI) gradually becomes the alternative in the PCB assembly line. In Particular, the PCB inspection machines need more reliable and flexible object recognition algorithms for high inspection accuracy. The conventional AOI machines use the algorithmic approaches such as template matching, Fourier analysis, edge analysis, geometric feature recognition or optical character recognition (OCR), which mostly require much of teaching time and expertise of human operators. To solve this problem, in this paper, a statistical learning based part recognition method is proposed. The performance of the ...