• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.73-82
• /
• 2007

The purpose of this study was to qualitatively analyze coordination pattern of joints and segments during Dwichagi in Taekwondo and present a point of difference as compared with the previous study on Dolryeochagi in Taekwondo. By the utilization of three-dimensional cinematography, the angles of individual joints and segments of six male Taekwondo experts during Dwichagi were calculated by using Euler's angle. The used coordination variables were angle vs. angle plots between adjacent joints and segments and angle vs. angular velocity plots of individual joints and segments, respectively. It was observed during Dwichagi that in-phase coordination and spring-like rotational control mechanism of the lower and upper trunk were transferred into straight spring-like control mechanism of lower leg passing through flexion-extension and the fixation of degree-of-freedom of lower trunk and hip joint alternatively. This comparative study that coordination variables were used seems to be more useful research direction to deeply understand basic control mechanisms of Taekwondo kicking techniques when compared with the previous studies that defined Dwichagi as a thrust movement pattern merely based on biomechanical variables of a kicking leg.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.485-486
• /
• 2006

This paper represents a ultra precision rotational device where the smooth impact drive mechanism(SIDM) is utilized as a driving mechanism. Linear motions of piezoelectric elements are converted to the rotational motion of disk by frictional forces generated between the rotational disk and the friction bars which are attached to the piezoelectric elements. This device was designed to drive a rotational disk using slip-slip motion mechanism based on stick-slip motion mechanism. Experimental results show that the angular velocity was increased in proportion to the magnitude of supplied voltage to piezoelectric element. In our device, the smooth rotational motion was obtained when the driving frequency has been reached to 500Hz under the driving voltage of 100V. The amount of step movement has been revealed to be $3.44{\times}10^{-4}$ radian.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.632-639
• /
• 2012

A fully coupled thermo-mechanical model is adopted to study the temperature distribution and the material deformation in friction stir welding(FSW) process. Rotational speed is most important parameters in this research. Three dimension results under different process parameters were presented. Result indicate that the maximum temperature is lower than the melting point of the welding material. The higher temperature gradient occurs in the leading side of the workpiece. The maximum temperature can be increased with increasing the tool angular velocity, rpm in the current numerical modeling. In this research ABAQUS Ver.6.7 is to analyze a fully coupled thermo-mechanical model. ALE(Arbitrary Lagrangian-Eulerian) finite element formulation is used for the large deformation in FSW process and using the Mass scaling for the analysis time efficiency.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.955-965
• /
• 1999

Centrifugal fans are widely used and the noise generated by the these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged form the impeller and the cutoff in the casing. However, only a few researches have been carried out on predicting the noise because of the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan. We assume that the impeller rotates with a constant angular velocity and the flow field of the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal by the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. A centrifugal impeller and wedge introduced by Weidemann are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal sound.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.19-26
• /
• 1997

This paper is concerned with the design of neural-network based autopilot control system. The back-propagation neural network introduced in the previous paper by authors is applied to the autopilot control system. As a result, two neural-network controllers are developed, which are the model reference adaptive neural controller and the instantaneous optimal neural controller. The model reference adaptive neural controller is the control technique that the heading angle and angular velocity are controlled by the rudder angle to follow the output of the reference model. The instantaneous optimal neural controller optimizes the transition from one state to the next state. These control techniques are applied to a simple ship maneuvering model and their effectiveness is proved by numerical examples.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.1 s.106
• /
• pp.57-65
• /
• 2006

In this paper, we present the principle of virtual work, from which the exact non-linear equations of motion of a rotating ring can be derived, by using the theory of finite deformation. For a thin ring of which the effect of variation in curvature across the cross-section is neglected, the radial displacement and the extensional stress are determined from the principle of virtual work at the steady state where the ring is rotating with a constant angular velocity. And also we formulate systematically the governing equations concerned to the in-plane vibrations and the out-of-plane vibrations at the disturbed state by using the principle of virtual work which is expressed with the disturbed displacements about the steady state. The formulated governing equations are classified by four models along the cases of considering or neglecting all or partly the secondary effects of flexural shear, rotary inertia, circumferential extension, and twist inertia. The natural vibrations of thin rings are analyzed, and its results are compared and discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.8-17
• /
• 2010

In this paper, a fault tolerant control against sensor faults of electric parking brake (EPB) is proposed. Fault tolerant control method of EPB system is strongly demanded since sensor faults can endanger a driver's safety. In this paper, a clamp force estimation method is presented using motor's armature current and angular velocity. Clamp force estimation method is applied for fault detection method with parity equations. The goal of the detection method is to detect and identify faults in encoder, current sensor, force sensor, and parking cable. And a switching logic for fault tolerant control against the three sensor faults is suggested. Experimental results show that the proposed force estimation method satisfies the specifications of EPB system. The effectiveness of the fault detection method is validated with experimental results. Although a single sensor fault happens, EPB system with the proposed fault detection method does not develop into a failure on subsystem or system level.

• Journal of The Korean Astronomical Society
• /
• v.27 no.2
• /
• pp.147-158
• /
• 1994

We have obtained high angular resolution maps toward a molecular cloud associated with an HII region S287 and studied mainly kinematics of the cloud. The mapped region is 1.5 square degrees of the cloud in the transitions of $^{12}CO\;and\;^{13}CO\;J=1-0$. We have obtained a large range of mass, $1.3\times10^4M_\bigodot$, to $7.2{\times}10^4M_{\bigodot}$ using three different techniques. The S287 molecular cloud shows a very disturbed feature: velocity field of the cloud is very complicated, and shows several arcs. It is likely that the southern part of cloud is being disrupted by the residing HII region S287 as well as external perturbing sources. In addition to an HII region, five bipolar outflows are also disturbing the molecular gas significantly. The large virial mass and the very disturbed morphology may reflect the fact that the cloud is not gravitationally bound system, as in the case of nearby giant molecular cloud (GMC) G216-2.5. The several arc structure and the filamentary features are possibly driven by external strong stellar winds, and these external perturbing sources may be driving the second generation of star-forming activities on the edges of the S287 molecular cloud.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.687-689
• /
• 1998

This paper represents fundamental developments in Fuzzy and Neural approaches. The Fuzzy Controller(FC) and plant are cascaded in Adaptive framework. Each of which produces its outputs. The adjustable parameters all pertain to the fuzzy controller is implemented as an Adaptive FC to adjust the environments of the plant. There is an error meaure block which is a difference between the actual state and desired state. We introduce error back propagation algorithm in neural method. To speed up convergence, we follow a steepest decent in the sense that each parameter set update leads to a smaller error measure and is learned by this methodology. Inverted pendulum is a typical testbed to measure the effectiveness of nonlinear control system. finally we simulated the adaptive fuzzy controller to be able to bring back to the upright position of the its angle and angular velocity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.93-100
• /
• 2018

This study proposes a controller that compensates torque error for precise angular velocity tracking and a method to compensate the stability of controller in implementation. Also, it is proved that the designed controller can be asymptotically stable based on Lyapunov stability theory. The proposed controller is able to control the d-axis reference current to arbitrary values and easily achieve control performance with two gains. As a result of applying to IPMSM of about 750W class, the steady state error with reference speed 1200 [RPM] is within 0.1 [%]. And it can be seen that it is an asymptomatic stable controller overcoming disturbance within about 0.2 second in application of constant load of about 5 [Nm].