• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.555-562
• /
• 2002

Isomers based on the RS and EZ geometrical isomerism of the neutral, deprotonated species of HMPAO and their complexes with zinc(Ⅱ) ion have been investigated by semiempirical AM1 optimization method. The Hartree-Fock energies on AM1 geometries o f HMPAO species were calculated with HF/6-31G* methods. Twenty-two isomers of the neutral and twenty isomers of the deprotonated species of HMPAO have been found. The presence of four EE-series isomers of both zinc(Ⅱ) complexes with the neutral and deprotonated HMPAO have been expected and the SREE typical isomer of both types of complexes is the most stable isomer. Energies of complexation of zinc(Ⅱ)/HMPAO isomers with AM1 geometries were calculated by HF/ 6-31G*method. Due to the complexations with zinc(Ⅱ), the structural reorganizations of some isomers of the neutral HMPAO have been occurred. The optimized geometrical parameters of the related conformations have been discussed in terms of their stabilities and existences.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.1
• /
• pp.24-29
• /
• 2020

In this study, we investigated the inhibition effects of mixtures of Atractylodes macrocephala (AM) and Amomum villosum (AV) water extracts on adipocyte differentiation. Treatment with mixtures of AM and AV extracts in a ratio of 3:1 for 24 and 48 hours did not show any cytotoxicity in OP9 cells. Mixtures of AM(3) and AV(1) extracts inhibited adipocyte differentiation, expression of peroxisome proliferator-activated receptor gamma (PPARγ) and CCAT/enhancer-binding protein alpha (C/EBPα), the major transcription factors of differentiation. It also inhibited the expression of lipoprotein lipase (LPL), adipocyte protein 2 (aP2), which are PPARγ-target genes in adipocyte. We also checked the inhibition effects on cell proliferation during the early stage of differentiation by treatment with mixtures of AM(3) and AV(1) extracts. It markedly inhibited adipocyte proliferation after 48 hours, and also the phosphorylation of ERK1/2 and Akt after 10 min or 3 hour. These results identify a possible mechanism of action of mixtures of AM(3) and AV(1) extracts, suggesting that the mixtures of AM(3) and AV(1) extracts-induced inhibition of ERK and Akt phosphorylation suppresses adipogenesis by inhibiting other signaling cascades that include PPARγ and C/EBPα during the process of OP9 adipocyte differentiation.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.54-57
• /
• 2008

Magnetic torquer, which uses torque between magnetic dipole moment and earth magnetic field, has been used to control attitude of satellites. In this work, we developed a magnetic torquer for small scientific satellite and test under environmental conditions of the satellite launching and orbital motion have been carried out. The developed magnetic torquer shows saturation magnetic dipole moment of $15Am^2$, linearity of 0.3 % in the range of ${\pm}12Am^2$, mass of 0.46 kg, and power consumption of 1 Watt at magnetic dipole moment of $10Am^2$.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.4
• /
• pp.262-267
• /
• 2013

The purpose of this study was to research for anti-oxidation and anti-wrinkle effects of Acar mono Sap (AM). To cosmetic effect of AM, safety effect (MTT assay), anti-wrinkle effect (elastase, MMP-1 inhibition assay) and anti-oxidant effect (DPPH assay) were measured. When water extract of AM was used for cell viability, it was over 100% at 6% (6 ml/100 ml in phosphate buffer) concentration. AM showed 45.7% elastase inhibition and 23.7% MMP-1 inhibition at 50% (50 ml/100 ml in phosphate buffer) concentration so that it had good anti-wrinkle characteristic. And AM showed 68.9% antioxidation capacity at 50% concentration by using a DPPH assay. Consequently, AM can be used as natural materials or additives for human skin owing to their beneficial biologic functions, including the anti-wrinkle effect, for cosmetic compositions.

• Corrosion Science and Technology
• /
• v.20 no.1
• /
• pp.37-43
• /
• 2021

Additively manufactured (AM) Ti-6Al-4V alloys exhibit a dominant acicular martensite phase (α'), which is characterized by an unstable energy state and highly localized corrosion susceptibility. Electrochemical critical localized corrosion temperature (E-CLCT, ISO 22910: 2020) and electrochemical critical localized corrosion potential (E-CLCP, ISO AWI 4631: 2021) were measured to analyze the localized corrosion resistance of the AM Ti-6Al-4V alloy. Although E-CLCP was measured under mild corrosive conditions such as human body, the validity of evaluating localized corrosion resistance of AM titanium alloys was demonstrated by comparison with E-CLCT. However, the mechanisms of resistance to localized corrosion on the as-received and heat-treated AM Ti-6Al-4V alloys under E-CLCT and E-CLCP differ at various temperatures because of differences in properties under localized corrosion and repassivation. The E-CLCT is mainly measured for initiation of localized corrosion on the AM titanium alloys based on temperature, whereas the E-CLCP yields repassivation potential of re-generated passive films of AM titanium alloys after breaking down.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.42-51
• /
• 2003

In this paper, we are going to analyze on relation of an output spectrum along phase distortion of power amplifier in wireless LAN system, and then considered an ACPR characteristic of power amplifier and consideration of an OFDM method for this. Also, we did implementation for OFDM modulation and transmission section of an IEEE 802.11a standard to have transmission speed of the maximum 54Mbps in order to know an OFDM modulation method and relation of non-linear characteristic of power amplifier. The non-linear characteristic of power amplifier did modeling with AM-to-AM and AM-to-PM, and we analyzed an output spectrum characteristic along phase distortion composed input signal supply for power amplifier. When output spectrum analysis results phase distortion increased, and an AM-to-PM characteristic of power amplifier in 5 degrees, the output spectrum was satisfied with a demand spectrum in P1 dB, but 10-20 degrees were able to confirm what cannot be satisfied with a demand spectrum in phase distortion. Also, an output spectrum of power amplifier by frequency re-growth generated by a non-linear characteristic of power amplifier did not satisfied in P1dE. therefore, a back-off value was requested according to an AM-to-PM distortion degree, and smaller back-off value were able to know what demand became in case of modulation section that used OFDM.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.6
• /
• pp.527-533
• /
• 2006

The response of chickpea (Cicer arietinum L.) to dual inoculation with Rhizobium (R) and arbuscular mycorrhiza (AM), nitrogen (N) and phosphorus (P) was studied on spore abundance and colonization of AM, nodulation, growth, yield attributes and yield. In all the parameters of the crop the performance of Rhizobium inoculant alone was superior to control. Dual inoculation with Rhizobium and AM in presence of P performed the best in recording number of spore $100g^{-1}$ rhizosphere soil and root colonization, number and dry weight of nodule, dry weights of shoot and root, number of pod $plant^{-1}$, number of seed $pod^{-1}$, seed and stover yields of chickpea. The maximum seed yield of 3.33 g $plant^{-1}$ was obtained by inoculating chickpea plants with Rhizobium and AM in association with P. From the view point of nodulation, growth, yield attributes and yield of chickpea, dual inoculation with Rhizobium and AM along with P was considered to be the balanced combination of nutrients for achieving the highest output from cultivation of chickpea in Shallow Red Brown Terrace Soil of Bangladesh.

• Journal of dental hygiene science
• /
• v.15 no.1
• /
• pp.12-17
• /
• 2015

The purpose of this study was to evaluate the marginal and internal gap of metal coping fabricated using additive manufacturing (AM) group and subtractive manufacturing (SM) group by dental computer-aided design (CAD)/computer-aided manufacturing (CAM) systems. Twenty same cases of stone models of abutment teeth 16 by the universal numbering system were manufactured and scanned. Ten metal copings of control group were fabricated using SM and ten metal coping of experimental group were fabricated using AM. Marginal and internal gap of copings were measured using the silicone replica technique and digital microscope (${\times}140$). The data were analyzed using IBM SPSS 21.0 Statistical Software for independent samples t-test (${\alpha}=0.05$). Mean${\pm}$ standard deviation (SD) of marginal and internal gap total size of SM group was $101.00{\pm}40.33{\mu}m$ of AM group was $83.61{\pm}40.37{\mu}m$. Mean${\pm}$SD of marginal and internal gap total size of SM group was significantly greater than that of AM group (p<0.05). This study showed that AM metal copings had a better marginal and internal gap than SM metal copings.

• Nuclear Engineering and Technology
• /
• v.3 no.3
• /
• pp.155-160
• /
• 1971

Average and effective energies for 239Pu-Be, 241Am-Li and 241Am-F neutron sources have been calculated from a number of published data for the neutron spectra and for the dose equivalent as a function of neutron energies by a numerical method. Also a calculation of the dose equivalent conversion factors, i. e., the first collision dose equivalent and the surface (or multicollision) dose equivalent that equals the product of surface-absorbed dose and a corresponding quality factor, per unit fluence of neutrons from these sources has been carried out in the same way as before. The results are as follows : 1. for average energies 4.07$\pm$0.33, 0.42 and 1.41 MeV； 2. for effective energies based on the concept of the first collision process in the human body 4.45$\pm$0.344, 0.51 and 1.47 MeV; 3. for effective energies based on the concept of the multi-collision process in the human body 4.50$\pm$0.36, 0.50 and 1.45 MeV； 4. for fluence-first collision dose equivalent conversion factors (2.74$\pm$0.07)10$^{-8}$ , 1.58$\times$ 10$^{-8}$ and 2.34$\times$10$^{-8}$ rems/(n/$\textrm{cm}^2$); and 5. for fluence-surface dose equivalent conversion factors (3.55$\pm$0.09)10$^{-8}$ , 2.19$\times$10$^{-8}$ and 2.82$\times$10$^{-8}$ rems/(n/$\textrm{cm}^2$) : respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1246-1252
• /
• 2001

A feeding experiment was conducted on rats to investigate the inhibitive effects of baik-kimchi against the toxicity of Amaranth (Am, Food Red No.2) on growth, fecal weights and bulk, and the digestibility of protein and lipid. The body weight of the Am diet group (5% Amaranth) remained at the lowest level of all diet groups, because of diarrhea symptoms throughout the feeding period, 229.8 g of total body weight or 79.4% of the basal diet group (289.4 g). However, in the baik-kimchi diet group (10% baik-kimchi powder+5% Amaranth) no diarrhea symptoms were evident and total body weight remained at a similar level (280.3 g) to the basal diet group. It therefore appears that baik-kimchi offers an inhibitive effect against the toxicity of Am. In the baik-kimchi diet group, the total fecal weight (173.99 g/3 weeks) was 15 times that of the basal diet group (11.13 g/3 weeks) suggesting that baik-kimchi has the effect of increasing fecal bulk. The large intestine and the cecum of the baik-kimchi diet group were significantly (p<0.05) heavier than those of the Am diet group. The digestibility of protein (50.26%) and lipid (58.37%) in the Am diet group was very low in comparison with these in the baik-kimchi diet group (87.30% and 92.12%, respectively). This result indicates that the low digestibility of these nutrients in the Am diet group was directly responsible for the decrease of weight. Consequently, it is demonstrated that baik-kimchi can inhibit the effects of the toxicity of Am in rats.