• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2165-2170
• /
• 1997

In this paepr, the distortion effects of impairments in CDMA transmitter system were analyzed. We considered not only linear distortion effects, for example, I/Q imbalance, quadrature offset and carrier leakage, but also nonlinear distortion effects such as AM-AM and AM-PM noise in power amplifier. To investigate how the impariments impact on the performance of CDMA transmitter, all effects represented as a function of CDMA modulation quality which is an important measure of the transmitted signal. These results show the limitation value of each impairment which is required to satisfy the IS-95 standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1133-1140
• /
• 1999

In order to provide high-speed wide-band multimedia services via Low earth(LEO) mobile satellire, power and bandwidth efficient digital transmission technique should to employed. This paper analyzes the performance of Trellis-soded 16QAM and 8PSK-2AM which can transmit twice as much inforemation as QPSK in nonlinearly amplified LEO mobile satellite channel. In the analysis the nonlinear mobile satellite channel is modelled by Rician fading channel amplified by Fujitsu's GaAs FET HPA. Our simulation result shows that 8PSK-2AM is less sensitive to the satellite channel nonlinear distortion and its BER performance is better than that of 16QAM. The BER performance of 8PSK-2AM is further improved by optimizing its signal constellation. Accocordingly it is found that Trellis-coded 8PSK-2AM could provide multimedia services such as Satellite Internet, DBS, DAB and ISDB more efficiently in the power and bandwidth limited mobile satellite channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.668-675
• /
• 2002

This paper proposes pre-distorter combined LUT with 2ιpartition interpolation method to reduce nonlinear distortion which was caused by high PAPR and to update LUT quickly. Pre-distorted gain and phase can be found by using LUT which consisted of AM/AM and AM/PM value, and OFDM signal amplitude. The proposed 2ιpartition interpolation can accurately find predistorted gain and phase using bit shift and add component instead of increasing size of LUT which requires increasing the amount of computation. The performance of the proposed method was measured by the difference between HPA input and output characteristics by the LUT size, constellation, SER performance by the HPA, and LUT update error by the HPA characteristic changes. As a result, it is shown that when the size of the LUT is 32 and 64 for 16-QAM and 64-QAM, nonlinear distortion nearly didn't occurred.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.187-190
• /
• 1999

In order to predict the effect of power amplifier non-linearity for digital modulated signal, this paper analyses the adjacent channel power ratio(ACPR) with the various AM-to-PM distortion levels. As the phase distortion increases from 0$^{\circ}$ to 12$^{\circ}$ at 1㏈compression point by 2.4$^{\circ}$ step, the input power level which satisfies the required ACPR decreases from 3.5㏈ to 6.5㏈ less than the 1㏈ compression input power.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.4
• /
• pp.235-243
• /
• 2008

In this paper, a software-based Digital Radio Modiale(DRM) receiver is implemented on a Digital Signal Processor(DSP). DRM stands for the European radio broadcasting standard to bring AM radio into digital radio, designed to work at frequencies below 30MHz. DRM can offer various data services such as text messaging and slideshow services as well as audio services. The DRM receiver implemented on the Tensilica DSP core performs well at low signal strength indication of -102dBm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.179-193
• /
• 2016

In power quality monitoring, voltage fluctuation is one of the power quality problems, which cause light flickers. To determine the flicker severity, the flicker meter concept was developed in an IEC 61000-4-15 standard. Generally, voltage fluctuations are described as an amplitude modulation(AM). The flicker meter of IEC 61000-4-15 as an international standard for flicker measurement recommends square demodulation method to detect flicker signals from voltage fluctuation signals. This paper suggests a new effective method using filter bank to detect and estimate flicker signals, which do not need square demodulation. For the accurate detection of flicker signals, the filter bank is designed with a full consideration of the spectrum characteristics of voltage fluctuation signals described as AM. The frequency and magnitude of the detected flicker signals are estimated using recursive method. Computer simulations were performed on synthesized signals to prove validity of the proposed method.

• Electronics and Telecommunications Trends
• /
• v.9 no.4
• /
• pp.131-138
• /
• 1994

최근 무선통신의 활성화에 따라, V/UHF(very/ultra high Frequency) 대역에서 한정된 주파수를 효율적으로 이용하기 위한 방법의 하나로서, 점차 점유 주파수 대역의 폭을 축소하여 보다 많은 이용자를 수용하도록 무선 채널의 협대역화가 추진되고 있다. 본 고에서는 먼저 V/UHF 대역 무선 통신에서 채널의 협대역화에 관련된 기술 중에서 현재까지 사용되고 있는 FM(frequency modulation), AM(amplitude modulation) 변조 방식의 장,단점을 살펴본후, 새로운 LM(linear modulation) 변조 방식에 대한 기술적 배경 및 특성을 알아보았다. LM은 SSR(single side band)-AM이 발전한 것으로서, TTIB(transparent tone-in-band), CLT(Cartesian loop transmitter), FFSR(feed-forward signal regeneration), DSP(digital signal processing)등 4가지의 기술이 결합하여 만들어진 것이다. LM 방식에 사용된 4가지 기술을 소개하고, 기존의 변조 방식에 비해 개선된 사항에 대해 서술한다.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.17-29
• /
• 2005

Time-frequency representation reveals some useful information about instantaneous frequency, instantaneous bandwidth and boundary of each AM-FM component of a speech signal. In many cases, the instantaneous frequency of each component is not constant. The variability of instantaneous frequency causes degradation of resolution in time-frequency representation. This paper presents a method of adaptively adjusting the transform kernel for preventing degradation of resolution due to time-varying instantaneous frequency. The transform kernel is the form of frequency modulated function. The modulation function in the transform kernel is determined by the estimate of instantaneous frequency which is approximated by first order polynomial at each time instance. Also, the window function is modulated by the estimated instantaneous. frequency for mitigation of fringing. effect. In the proposed method, not only the transform kernel but also the shape and the length of. the window function are adaptively adjusted by the instantaneous frequency of a speech signal.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.183-187
• /
• 2003

When a flexible arm is rotated by a motor about an axis through the arm's fixed end, transverse vibration may occur. The motor torque should be controlled in such a way that the motor rotates by a specified angle, while simultaneously stabilizing vibration of the flexible arm so that it is arrested at the end of rotation. In this paper, we propose nonlinear observer for one-link flexible am. Then based on the error dynamic equation between the plant dynamic equation and the nonlinear observer dynamic equation of the flexible one-link am, Lyapunov candidate function is applied to achieve a stable deterministic nonlinear feedback controller for the regulation of joint angle.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.395-399
• /
• 2018

This article investigates the mechanism of electronic signal phase noise degradation induced by laser phase noise in optical links comprising optical resonators. Through theoretical derivation, we find that the phase noise of the output electronic signal has the same spectral shape of optical intensity noise as the output of the optical resonator. We propose that the optical resonator transfers laser phase noise to light intensity fluctuation and then the intensity fluctuation is converted to electric phase noise through AM-PM conversion mechanism in the photodiode. An optical link comprising a Fabry-Perot resonator was constructed to verify the proposed mechanism. The experimental results agree with our theoretical prediction verifying that the supposition is correct.