• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.27-31
• /
• 2006

Millimeter over Fiber (MMoF) technique modulates millimeter wave signal optically to transmit it through an optical fiber for long distances with small loss. MMoF system usually uses optical single sideband (OSSB) modulation scheme to reduce fiber chromatic dispersion and obtain high bandwidth efficiency. The optical link of MMoF system using OSSB is treated as a nonlinear amplifier, and the AM/AM characteristic function of the amplifier is a Bessel function of the first kind of order 1. In this paper, we investigate the performance of OFDM MMoF system considering nonlinearity of OSSB modulation. We estimate a power of the nonlinear distortion noise to analyze the theoretical bit error rate(BER), and perform a simulation to verify the theoretical BER.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1316-1319
• /
• 1996

진폭변조(AM) 신호를 검파기하기 위한 디지탈 시스템을 실현하기 위해서는 보통 변조된 신호의 최대주파수의 2배 이상되는 주파수로 샘플링해야만 한다. 이러한 경우에 반송파가 커지면 처리할 데이터가 많아지기 때문에 디지탈 시스템이 복잡해져 실시간 처리가 어렵게 된다. 본 연구에서는 샘플링 주파수를 대역폭을 기준으로 하여 낮출 수 있는 유용한 두 종류의 복조시스템을 제안하였다. 또한 undersampling한 복조회로에 대한 특성 및 오차를 해석하고 검토하였다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.42-51
• /
• 2003

In this paper, we are going to analyze on relation of an output spectrum along phase distortion of power amplifier in wireless LAN system, and then considered an ACPR characteristic of power amplifier and consideration of an OFDM method for this. Also, we did implementation for OFDM modulation and transmission section of an IEEE 802.11a standard to have transmission speed of the maximum 54Mbps in order to know an OFDM modulation method and relation of non-linear characteristic of power amplifier. The non-linear characteristic of power amplifier did modeling with AM-to-AM and AM-to-PM, and we analyzed an output spectrum characteristic along phase distortion composed input signal supply for power amplifier. When output spectrum analysis results phase distortion increased, and an AM-to-PM characteristic of power amplifier in 5 degrees, the output spectrum was satisfied with a demand spectrum in P1 dB, but 10-20 degrees were able to confirm what cannot be satisfied with a demand spectrum in phase distortion. Also, an output spectrum of power amplifier by frequency re-growth generated by a non-linear characteristic of power amplifier did not satisfied in P1dE. therefore, a back-off value was requested according to an AM-to-PM distortion degree, and smaller back-off value were able to know what demand became in case of modulation section that used OFDM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1C
• /
• pp.73-81
• /
• 2005

We propose an automatic modulation recognition scheme which extracts pre-defined key features from the received signal and then applies equal gain combining method to determine the used modulation. Moreover, we compare and analyze the performance of the proposed algorithm with that of decision-theoretic algorithm. Our scheme extracts five pre-defined key features from each data segment, a data unit for the key feature extraction, which are then averaged over all the segments to recognize the modulation according to the decision procedure. We check the performance of the proposed algorithm through computer simulations for analog modulations such as AM, FM, SSB and for digital modulations such as FSK2, FSK4, PSK2, and PSK4, by measuring recognition success rate varying SNR and data collection time. The result shows that the performance of the proposed scheme is comparable to that of the decision-theoretic algorithm with less complexity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.514-522
• /
• 2015

In Microwave Radio Link, it is necessary to consider the radio fading to consistently assure the radio link of the high quality as the distance. If the fixed modulation is used for the microwave radio link, it is difficult to keep the high availability of link for the case of the long distance. Adaptive Modulation(AM) provide good quality on microwave link, but the application of the only-AM is not enough to provide the availability assurance due to the fluctuating characteristics of link capacity. Our previous study has proposed the improvement method of transmission in association with the distance, however the previous method needed to make up for the common application. There was no suggestion of a mathematical formula with a variable. In this paper, we propose an optimized Adaptive Transmission Techniques with calculating formula of the priority traffic transmission capacity based on AM in consideration of the fade margin for the availability assurance as the distance and the comparison of the channel bandwidth for Long-distance Radio Link.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.282-291
• /
• 2011

Adaptive modulation(AM) is an important technique to increase the system efficiency, in which transmitter selects the most suitable modulation mode adaptively according to channel state in the temporary and spatially varying communication environment. Fixed modulation on channels with varying signal-to-noise ratio(SNR) is that the bit-errorrate(BER) probability performance is changing with the channel quality. An adaptive modulation scheme can be designed to have a BER which is constant for all channel SNRs. The correct as well as fast and simple SNR estimation is required essentially for this adaptive modulation. In order to operate adaptive modulation system effectively, in this paper, we analyze the effect of SNR estimation performance to it through the average BER and data throughput. Applying SNR estimation based on auto-correlation of decision feedback signal and others to adaptive modulation system, we also confirm performance degradation or improvement of its which is decided by SNR estimation error at each transition point of modulation level. Since SNR estimation based on auto-correlation of decision feedback signal shows stable estimation performance for various quadrature amplitude modulation(QAM) comparatively, this can be reduced degradation than others at each transition point of modulation level.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.4
• /
• pp.20-30
• /
• 1969

Several new modulators using Voltage Variable Capacitance Diode are discribed. It was investigated that amplitude modulation which does not need modulation power is obtained by mdulation VVC diode as a tuning element of the quartz oscillator circuit. It offers a good AM system for carryphones in the citizen bands. While frequency modulated quartz oscillators coupled with a quarter wave network were tested as a wide band frequency modulator, Hartley type transistor oscillator offers the most stable and reproducibel FM quartz oscillator.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.151-155
• /
• 2004

Millimeterwave OFDM wireless LAN system has been modeled for ACPR analysis. With simple AM-to-PM modeling for power amplifier and system simulation technique, power amplifier ACPR is simulated for OFDM modulation, Also, amplifier back-off value satisfying the required ACPR and the ACPR degradation have been predicted with the measured and modeled AM-tn-PM distortion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.738-745
• /
• 2007

The non-linearity of HPA(high power amplifier) which is an important component in modern communications systems introduces AM/AM and AM/PM distortion so that the transmitted signal is deteriorated. And, the I/Q unbalances and phase error which are generated by non-ideal components are inevitable physical phenomena and lead to performance degradation when we implement a practical two-dimensional (2-D) modulation system. In this paper, we provide an exact and general expression involving the 2-D Gaussian Q-function for the error probabilities of arbitrary 2-D signaling with I/Q amplitude and phase unbalances in nonlinear additive white Gaussian noise (AWGN) channels by using the coordinate rotation and shifting technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.7
• /
• pp.620-624
• /
• 2016

In this paper we designed a current mode logic frequency divider to transmit a baseband amplitude modulated signal. From simulation result, we studied input and output waveforms according to the variation of input bias voltage. For the purpose of the verification of the study, we designed a current mode logic frequency divider at 1,400 MHz. The designed frequency divider operates between 100 MHz and 3,000 MHz, for -33 dBm input power. The circuit draws $I_{total}=30mA$ from $V_{DD}=3V$ supply, and the simulation result shows that an amplitude modulated signal at 1,400 MHz with the modulation index of 0.5 was successfully downconverted to 700 MHz.