• 제목/요약/키워드: AE Event

검색결과 150건 처리시간 0.026초

Acoustic Emission 파형분류에 의한 플라즈마 용사 코팅재의 인장해석 (Tensile Analysis of Plasma Spray Coating Material by Classification of AE Signals)

  • 김귀식;오명범
    • 한국해양공학회지
    • /
    • 제15권4호
    • /
    • pp.60-65
    • /
    • 2001
  • Thermal spray coating is formed by a process in which melted particles flying with high speed towards substrate, then crash and spread on the substrate surface cooled and solidified in a very short time, Stacking of the particles makes coating. In this study, the exfoliation of $Al_2$O$_3$ and Ni-4.5wt.%Al thermally sprayed coating which were deposited by an atmospheric plasma spray apparatus are investigated using an AE method. A tensile test is conducted on notch specimens in a stress range below the elastic limit of substrate. The wave forms of AE generated from the three coating specimens can be classified by FFT analysis into two types which low frequency(type I waveform is considered to corresponds exfoliation of coating layers and type II waveform corresponds the plastic deformation of notch tip or the resultant fracture of coating. The fracture of the coating layers can estimate by AE event and amplitude, because AE features increase when the deformation generates.

  • PDF

Al 7075/CFRP 하이브리드 복합재료의 미시적 파괴특성에 대한 AE특성평가 (Evaluation of AR Characteristics on Microscopic Fracture Mechanism of A17075/CERP Hybrid Composite)

  • 이진경;이준현;윤한기
    • Composites Research
    • /
    • 제15권5호
    • /
    • pp.1-6
    • /
    • 2002
  • 하이브리드 복합재료는 FRP나 MMC와 같은 복합재료에 비하여 높은 비강도, 내피로 특성을 가지고 있기 때문에 많은 관심을 받고 있다. 그러나 하이브리드 복합재료는 금속과 FRP의 결합구조로 되어있기 때문에 매우 복잡한 파손기구를 가지고 있다. 최근에는 비파괴 기법을 이용하여 이러한 복합재료의 파손기구를 평가하고자 하는 연구가 수행되어지고 있다. 본 연구에서는 음향방출 기법을 이용하여 Al7075/CFRP 하이브리드 복합재료에 대한 손상정도 및 파손기구를 명확히 하고자 하였다. 특히 AE 사상수, 에너지, 진폭과 같은 AE 파라미터들은 Al7075/CFRP 하이브리드 복합재료의 파손과정을 평가하는데 효과적이었다. 더불어, 광학현미경을 이용하여 AE 신호와 시험편의 표면소상 특성과의 관계를 비교, 검토하였다.

Non-destructive evaluation of steel and GFRP reinforced beams using AE and DIC techniques

  • Sharma, Gaurav;Sharma, Shruti;Sharma, Sandeep K.
    • Structural Engineering and Mechanics
    • /
    • 제77권5호
    • /
    • pp.637-650
    • /
    • 2021
  • The paper presents an investigation of the widely varying mechanical performance and behaviour of steel and Glass Fibre Reinforced Polymer (GFRP) reinforced concrete beams using non-destructive techniques of Acoustic Emission (AE) and Digital Image Correlation (DIC) under four-point bending. Laboratory experiments are performed on both differently reinforced concrete beams with 0.33%, 0.52% and 1.11% of tension reinforcement against balanced section. The results show that the ultimate load-carrying capacity increases with an increase in tensile reinforcement in both cases. In addition to that, AE waveform parameters of amplitude and number of AE hits successfully correlates and picks up the divergent mechanism of cracking initiation and progression of failure in steel reinforced and GFRP reinforced concrete beams. AE activity is about 20-30% more in GFRP-RC beams as compared to steel-RC beams. It was primarily due to the lower modulus of elasticity of GFRP bars leading to much larger ductility and deflections as compared to steel-RC beams. Furthermore, AE XY event plots and longitudinal strain profiles using DIC gives an online and real-time visual display of progressive AE activity and strains respectively to efficaciously depict the crack evolution and their advancement in steel-RC and GFRP-RC beams which show a close matching with the micro-and macro-cracks visually observed in the actual beams at various stages of loading.

한약을 사용하는 아시아권 국가의 유해사례 보고 양식에 관한 비교 연구 (Comparison about adverse drug reaction report forms among Asian's countries using herbal medicine)

  • 선승호;이은경;장보형;박선주;고호연;전찬용;고성규
    • 대한예방한의학회지
    • /
    • 제19권3호
    • /
    • pp.91-102
    • /
    • 2015
  • Objective : The purpose of this study is to find out the possibility of application to herbal medicine's report form for adverse drug reaction (ADR) by reviewing and analyzing Asian countries's ADR report forms. Method : We investigated, compared, and analyzed ADR report forms (ADR-RF) of Asian countries's ADR institutions (ACAI), such as, Korea institute of drug safety & risk management and Dongguk university Ilsan oriental hospital (DUIOH) in Korea, national center for ADR monintoring (NCAM) in China, pharmaceuticals and medical devices agency (PMDA) in Japan, Ministry of Health and Welfare (MOHW) in Taiwan, and drug office, department of health, the government of the Hong Kong special administrative region (GHKSAR) in Hong Kong. Results : ADR-RF for ACAI included common contents, such as, patients information (name(initial), gender, age, weight), adverse event (AE)'s report information (Recognition and report for AE occurrence, first or follow up report, Severe AE), the detailed information of AE (the title of AE, onset & closing date of AE symptoms, the progress & results detailed test of AE), the information of AE's medicine (the types of medicine, product name, ingredient name, suspected or combination drug, single dose & frequency, dosage form, administration route, dealing for AE-suspected medicine), and AE reporter's information (reporter's information, institution's information). Taiwan had ADR-RF and the department exclusively for herbal medicine (HM), but others (except DUIOH) had not only no ADR report form but also contents for HM. Conclusion : ADR-RF for HM have to include the common contents of ACAI at least, as well as HM information related to ADR, such as the title, composition and types of HM, history related to HM's ADR, and the contents of drug-induced liver injury and so on. In addition, the main department of government for HM's ADR will be needed.

유리섬유강화 복합재의 AR특성에 대한 섬유배향 효과 (fiber Orientation Effects on the Acoustic Emission Characteristics of Class fiber-Reinforced Composite Materials)

  • 김정현;우성충;최낙삼
    • 비파괴검사학회지
    • /
    • 제23권5호
    • /
    • pp.429-438
    • /
    • 2003
  • 본 연구에서는 연속형 일방향 및 수자직 유리섬유강화 복합재료로 인장 시험편을 만들어 AE 특성에 대한 섬유배향 효과를 살펴보았다. AE 신호들을 STFT 처리하여 특성별로 분류하였으며, 반사식 및 투과식 편광현미경을 이용하여 시험편의 손상영역을 관찰하였다. 저주파수 대역의 약한 AE 신호들은 모재 및 계면에서의 손상으로 나타났으며, 높은 진폭의 고주파수 대역 AE 신호들은 섬유 파단에 기인하였다. 섬유 파단 과정에서 발생하는 고진폭의 AE 사상률을 기본 특성 데이터로 하여 다른 섬유배향과 노치방향을 가진 복합재에서의 파괴과정을 특징지을 수 있었다. 결론적으로, AE범은 연속형 유리섬유 강화 복합재의 파괴거동을 탐지하는데 있어 유용함을 알 수 있었다.

물 스트레스를 받는 속씨식물과 겉씨식물에서 검출된 음향방출의 신호특성 (Signal Characteristics of Acoustic Emission from Angiosperm and Gymnosperm by the Water Stress)

  • 남기우
    • 비파괴검사학회지
    • /
    • 제23권5호
    • /
    • pp.480-487
    • /
    • 2003
  • 식물의 환경제어 향상을 위하여, 비파괴적인 방법을 사용하여 식물의 신호 특성이 연구되고 있다. 본 연구에서는 속씨식물과 겉씨식물에서 검출되는 음향방출 신호에 미치는 물 스트레스의 영향에 대하여 검토하였다. 낮 시간의 음향방출 신호는 밤 시간 보다 훨씬 많았으며, 낮 시간의 신호는 식물의 물 스트레스에 의해서 발생한 것으로 판단된다. 속씨식물과 겉씨식물은 음향 신호의 강한 주파수 대역이 다르게 나타났으며, 실외에서 검출한 식물의 음향 신호 주파수는 동일한 식물을 사용하여 실내에서 검출한 신호의 주파수 범위와 일치하였다.

최소제곱법에 의한 PSC보의 음향방출파원 위치결정 (Location of Acoustic Emission Sources in a PSC Beam using Least Squares)

  • 이창노
    • 한국측량학회지
    • /
    • 제24권3호
    • /
    • pp.271-279
    • /
    • 2006
  • 음향방출(AE: Acoustic Emission) 기법은 구조물 내부에서 발생하는 균열을 연속적으로 모니터링 할 수 있는 효과적인 비파괴검사법이다. 본 논문에서는 AE센서을 이용하여 PSC 보에서의 파원위치를 결정하기 위한 수학적 모델을 제시하고 실험을 통해 제시된 모델을 평가하였다. 실험을 위해 제작된 5m-PSC보의 표면에서 인위적으로 쉬미트해머의 타격에 의해 탄성파를 발생시켰으며 1m 간격으로 선형으로 배치된 7개의 AE센서에 의해 탄성파의 도달시간이 측정되었다. 최소제곱법에 의해 측정된 도달시간의 잔차의 제곱합이 최소가 되도록 파원의 위치를 구한 후, 실제 타격위치와 비교하여 추정된 위치결정방법의 정확도를 평가하였다. 54개의 타격실험을 통해 얻어진 파원위치의 평균제곱근 오차는 약 2cm 이었다.

Nondestructive Evaluation on Hydrogen Effect of TIG Welded Stainless Steel for Component Design of Pressure Vessel

  • Lee, Jin-Kyung
    • 동력기계공학회지
    • /
    • 제21권3호
    • /
    • pp.102-107
    • /
    • 2017
  • A tungsten inert gas (TIG) welding method was used for the bonding of stainless steel. TIG welding using inert gas (He or Ar gas) is a method to prevent oxidation and nitriding of materials and to combine non-ferrous metals. This method has the advantage of obtaining a smooth weld surface. In this study, the welding characteristics of 304 stainless steel welded by TIG welding method were analyzed by using nondestructive technique. Ultrasonic and Acoustic Emission (AE) was applied to evaluate the micro-damage of TIG welded 304 stainless steel. The velocity and damping coefficient of ultrasonic wave showed a slight difference in HAZ, which is the welding part of stainless steel. The AE parameters of average frequency, rise time and event were analyzed for the dynamic behavior of stainless steel during loading. Optimal AE parameters for evaluating the degree of damage to the specimen have been derived. Fractograph and metal structures of 304 stainless steel using SEM and optical microscope were discussed.

유비쿼터스 컴퓨팅 환경에서 Event Driven 상황정보 모델링 및 서비스 구현 (Context aware Modeling and Services Implementation With Event Driven in Ubiquitous Computing Environment)

  • 김형선;김현;문애경;조준면;홍충성
    • 인터넷정보학회논문지
    • /
    • 제7권5호
    • /
    • pp.13-24
    • /
    • 2006
  • 최근 상황인식 기술은 유비쿼터스 환경에서 중요한 이슈로 떠 오르고 있으며, 연구자들에 의해 많은 연구가 이루어 지고 있다. 상황인식 기술은 상황정보를 획득/가공하여 사용자에게 필요한 서비스와 정보를 제공하는 컴퓨터 시스템이다. 상황인식 시스템은 각종 센서로부터 발생하는 낮은 수준의 상황정보를 높은 수준의 상황정보로 변환하여 사용자에게 원하는 서비스를 제공하는 환경을 만들어 준다. 본 논문에서는 물리적인 스마트 공간에 존재하는 각종 센서로부터 얻어진 하위단계(Low level)의 Event driven 센서정보를 온톨로지 기반 상황정보로 모델링 하여 상위단계(High level) 상황정보로 변환하는 상황인식 모델링과 시스템을 제안한다. 또한 변환된 High level 상황정보는 가상공간에서 ECA(Event Condition, Action) 룰에 따라 사용자에게 언제 어디선지 사용자가 필요로 하는 능동적이고 지능적인 서비스를 제공하고, 스마트 오피스 환경에서 발표 도우미 서비스를 구현하였다.

  • PDF

Acoustic Emission Monitoring of Lightning-Damaged CFRP Laminates during Compression-after-Impact Test

  • Shin, Jae-Ha;Kwon, Oh-Yang
    • 비파괴검사학회지
    • /
    • 제32권3호
    • /
    • pp.269-275
    • /
    • 2012
  • Carbon-fiber reinforced plastic(CFRP) laminates made of nano-particle-coated carbon fibers and damaged by a simulated lightning strike were tested under compression-after-impact(CAI) mode, during which the damage progress due to compressive loading has been monitored by acoustic emission(AE). The impact damage was induced not by mechanical loading but by a simulated lightning strike. Conductive nano-particles were coated directly on the fibers, from which CFRP coupons were made. The coupon were subjected to the strikes with a high voltage/current impulse of 10~40 kA within a few ${\mu}s$. The effects of nano-particle coating and the degree of damage induced by the simulated lightning strikes on AE activities were examined, and the relationship between the compressive residual strength and AE behavior has been evaluated in terms of AE event counts and the onset of AE activity with the compressive loading. The degree of impact damage was also measured in terms of damage area by using ultrasonic C-scan images. The assessment during the CAI tests of damaged CFRP showed that AE monitoring appeared to be useful to differentiate the degree of damage hence the mechanical integrity of composite structures damaged by lightning strikes.