• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.361-371
• /
• 1993

Among the various test methods for stress corrusiun cracking(SCC) susceptibility evaluatiun, the slow stram rate test(SSHT) method is a rapid and effective nwthod to evaluate the SCC susceptibility of metal in relatively short time. But it is very difficult to analyze the microfracture behaviors in SCC process by using the test(SSRT) method only. Up to now, it has been well known that the acoustic emission(AE) test is the effective technique to monitor the microcrack initiation and propagation in material fracture pmcess. Therefore. in this paper, we analyzed the correlation between the see process and the characteristics of AE signal by using the SSHT and the AE test. According to the test results. the AE signals produced from the material microfracture were clearly depended on the test environment. The AE signal characteristics generated during see process in synthetic sea water were comparatively greater than those. in air. In addition, the SCC behaviors could be definitely evaluated by the amplitude parameter of AE signals.

• Proceedings of KHEA Conference
• /
• 2007.06a
• /
• pp.47-47
• /
• 2007

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.793-798
• /
• 1999

This study was conducted to evaluate structural integrity and crack source location of plain concrete beams using acoustic emission. Three point bending tests were carried out plain concrete specimen under cyclic loadings. The variable is W/C of concrete. From the tests it was shown that a breakdown of the kaiser effect and high AE activities during unloading could be effective indices to estimate the level of deterioration in plain concrete structures. The time and location and propagation of crack could be easily determined by monitoring AE, which concludes that AE technique can be a very useful tool to evaluate structural integrity of concrete plain beams.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.229-232
• /
• 2006

The HPFRCCs show that the multiple crack propagation, high tensile strength and ductility due to the interfacial bonding of the fibers to the cement matrix. Moreover, performance of cement composites varies according to type and weight contents of reinforcing fiber. and HPFRCCs with hybrid fiber have better performance than HPFRCCs with single fiber in damage tolerance. Total four cylindrical specimens were tested, and the main variables were the type and weight contents of fiber, which was polyvinylalchol (PVA), polyethylene (PE). In order to clarify effect of hybrid types on the characteristics of fracture and damage process in cement composites, AE method was performed to detect micro-cracking in HPFRCCs under cyclic compression. Loading conditions of the uniaxial compression test were monotonic and cyclic loading. And from AE parameter value, it is found that the second and third compressive load cycles resulted in successive decrease of the amplitude as compared with the first compressive load cvcle.

• Journal of KIISE:Software and Applications
• /
• v.32 no.8
• /
• pp.717-729
• /
• 2005

Product Line Engineering (PLE) consists of two phases; Core Assets Development and Application Engineering. The core asset development is to model common features of members in a domain and to develop them. The application engineering is to effectively generate an application by instantiating the core asset. Today, PLE research mainly focuses on developing core assets, whereas activities and instructions for application engineering are weakly defined. Moreover, instructions of application engineering are not enough to be practically applied. To widely apply PLE to industry, researches on systematic and practical methods such as instantiation processes, instructions, and artifacts are needed. In this paper, we propose a practical PLE process, instructions, and artifacts about each activity. And then, we also present a case study to show applicability and practicality of the process proposed in this paper.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.103-109
• /
• 2005

Fiber reinforced plastic material should be inspected in fabrication process in order to enhance quality by prevent defects such as delamination and void. Generally, ultrasonic technique is widely used to evaluate FRP. In conventional ultrasonic techniques, transducer should be contacted on FRP. However, conventional contacting method could not be applied in fabrication process and novel non-contact evaluating technique was required. Laser-based ultrasonic technique was tried to evaluate CFRP plate. Laser-based ultrasonic waves propagated on CFRP were received with various transducers such as accelerometer and AE sensor in order to evaluate the properties of waves due to the variation of frequency. Velocities of laser-based ultrasonic waves were evaluated for various fiber orientation. In addition, laser interferometry was used to receive ultrasonic wave in CFRP and frequency was analysed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2022

Fixslicing AES is a technique that omits the Shiftrows step to minimize the cost of the linear layer of Bitsliced AES, showing a 30% performance over the Bitsliced technique. However, the amount of code increases to compensate for the omitted shiftrows. Therefore, it is proposed to be divided into Semi-Fixsliced in which only half of shiftrows are omitted and Fully-Fixsliced in which Shiftrows are omitted completely. In this paper, we propose a CTR mode implementation of Fixslicing AES on RISC-V using the pre-computed table technique. By utilizing the characteristics of the CTR mode, it is possible to perform fast encryption by omitting up to the second round SubBytes from the encryption process through pre-computed up to the second round SubBytes operation. Using this technique, it was confirmed that Semi-Fixsliced has a performance of 1,345 cycles per block and a performance improvement of 7% compared to the previous performance result, and Fully-Fixsliced has a performance of 1,283 cycles per block and a performance of 9% compared to the previous performance result on 32-bit RISC-V.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.75-80
• /
• 2006

In this paper, to detect and observation the void discharges pulse signal, AE signals and tree growth characteristics in case the high voltage is applied to a XLPE sample for a power cable. We also examined the partial discharge current pulse and AE signals with the increase of the applied voltage in XLPE insulation. The experimental results show that a branch-type tree grows in the presence of the voids, and a bush-type tree grows in the absence of the voids in both samples. A rate of tree growth increases abruptly in proportional to the deterioration time in the presence of the of the voids, but in the absence of the voids, a rate of tree growth decreases as time goes by and finally a breakdown occurs. The frequency band of AE signals that are generated from the partial discharges in a XLPE sample, one of solid dielectric materials, is about 1.0[MHz].

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.231-238
• /
• 2020

This paper investigates the soundness of porcelain insulators associated with the acoustic emission (AE) technique. The AE technique is a popular non-destructive method that measures and analyzes the burst energy that occurs mainly when a crack occurs in a high-frequency region. Typical AE methods require continuous monitoring with frequent sensor calibration. However, in this study, the AE technique excites a porcelain insulator using only an impact hammer, and it applies a high-pass filter to the signal frequency range measured only in the AE sensor by comparing the AE and the acceleration sensors. Next, the extracted time-domain signal is analyzed for the damage assessment. In normal signals, the duration is about 2ms, the area of the envelope is about 1,000, and the number of counts is about 20. In the damage signal, the duration exceeds 5ms, the area of the envelope is about 2,000, and the number of counts exceeds 40. In addition, various characteristics in the time and frequency domain for normal and damage cases are analyzed using the short-time Fourier transform (STFT). Based on the results of the STFT analysis, the maximum energy of a normal specimen is less than 0.02, while in the case of the damage specimen, it exceeds 0.02. The extracted high-frequency components can present dynamic behavior of crack regions and eigenmodes of the isolated insulator parts, but the presence, size, and distribution of cracks can be predicted indirectly. In this regard, the characteristics of the surface crack region were derived in this study.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.9
• /
• pp.393-398
• /
• 2013

This paper introduces a new collision attack on first-order masked AES. This attack is a known plaintext attack, while the existing collision attacks are a chosen plaintext attack. In addition, our method is more efficient than the second-order power analysis and requires about 1/27.5 power measurements by comparison with the last collision attack. Some experiment results of this paper support this fact. In this paper, we also introduce a simple countermeasure, which can protect against our attack.