• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.1-5
• /
• 2000

Recently alternating-current Plasma Display Panel(AC-PDP) is in the spotlight as a digital television and high definition television. The panel structure widely adapted in commercial AC-PDP is three electrodes surface discharge type. At present time, the luminous efficiency is around 1lm/W, it should be a key factor for the commercialization. For the high luminous efficiency, the development of panel structure is necessary. At a given panel structure, a driving method should be optimized to get a sufficient luminous efficiency. The display image of AC-PDP could be realized by the repeated light emission from the discharge. Because most of discharge power is consumed in the sustaining period, the optimization of sustaining waveform is very important for the high luminous efficiency. ADS (Address and Display period Separated) driving method is commonly used. The average driving frequency of ADS driving method is ranged by several tens kilo of [kHz], however the actual frequency of sustaining period is in range of 100[kHz] to 200[kHz]. Based on this study, when the phosphor emits the visible light, it has a decay time of few milliseconds due to the material transfer to the phosphor to emit the visible light. Consequently the luminous efficiency decreases in proportion to the driving frequency. It is found that the luminous efficiency could be significantly improved by the low frequency sustaining driving method.

• Asia pacific journal of information systems
• /
• v.22 no.4
• /
• pp.125-149
• /
• 2012

As the smart phone is propagating rapidly, the importance of mobile advertisement has also grown. One of the main characteristics of the Internet and smart phone advertising is that they can deliver personalized advertisements to each customer. The smart phone enables the identification of additional personalized information such as the customer's location and the accessibility to the site at any place any time. As the Internet platform becomes richer, firms that offer the ad services via the wired PC Internet and wireless smart phone are seeking various types of personalized ads. However, their service platform and Information and Communication Technology (ICT) platform should be suitable to the characteristics of personalized ads. This research explores various types of personalized ad methods and evaluates their adequacy encompassing four types of ad service platforms (such as search portal, news portal, e-mall servers, and SNS) and two types of ICT platforms (PC Internet and smart phone). To this end, we classified the personalized ads into seven types: three basic types and four composite types. The basic types of ad methods are identified by considering the current activity that the customer is engaged, the individual profile and log history, and the customer's current location or planning location. Four composite types of ad methods are constructed as the combination of these basic types. For those types of ad methods, we evaluate whether each ad method adequately maps with four types of ad service platforms and two types of ICT platforms. We proposed a metric of evaluation and demonstrated the concept with illustrative numbers. Specifically, we analyze and compare personalized ad methods in three ways. Firstly, the possibility of implementing a personalized ad method on the platform is analyzed to confirm the degree of suitability. Secondly, the value of personalized ad method is analyzed based on the customer accessibility. Lastly, expected effectiveness for each personalized ad method is computed by multiplying the possibility and the value. Through this kind of analysis, the ad service providers as well as advertising companies can evaluate what kinds of personalized ad methods and platforms are possible and suitable to maximize their ad effectiveness on the Internet and smart phone platforms.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.119-129
• /
• 2003

The Langmuir adsorption isotherms of the over-potentially deposited hydrogen (OPD H) fur the cathodic $H_2$ evolution reaction (HER) at the poly-Au and $Rh|0.5M\;H_2SO_4$ aqueous electrolyte interfaces have been studied using cyclic voltammetric and ac impedance techniques. The behavior of the phase shift $(0^{\circ}{\leq}{-\phi}{\leq}90^{\circ})$ for the optimum intermediate frequency corresponds well to that of the fractional surface coverage $(1{\geq}{\theta}{\geq}0)$ at the interfaces. The phase-shift profile $({-\phi}\;vs.\;E)$ for the optimum intermediate frequency, i.e., the phase-shift method, can be used as a new electrochemical method to determine the Langmuir adsorption isotherm $({\theta}\;vs.\;E)$ of the OPD H for the cathodic HER at the interfaces. At the poly-Au|0.5M $H_2SO_4$ aqueous electrolyte interface, the equilibrium constant (K) and the standard free energy $({\Delta}G_{ads})$ of the OPD H are $2.3\times10^{-6}$ and 32.2kJ/mol, respectively. At the poly-Rh|0.5M $H_2SO_4$ aqueous electrolyte interface, K and ${\Delta}G_{ads}$ of the OPD H are $4.1\times10^4\;or\;1.2\times10^{-2}$ and 19.3 or 11.0kJ/mol depending on E, respectively. In contrast to the poly-Au electrode interface, the two different Langmuir adsorption isotherms of the OPD H are observed at the poly-Rh electrode interface. The two different Langmuir adsorption isotherms of the OPD H correspond to the two different adsorption sites of the OPD H on the poly-Rh electrode surface.

• Journal of Plant Biotechnology
• /
• v.1 no.2
• /
• pp.79-83
• /
• 1999

A method for induction of multiple shoots using cotyledonary nodes and shoot tips of Macrotyloma uniflorum (Lam.) Verdc. was described. The experiment was conducted in which shoot induction was noticed on Murashige and Skoog (MS) medium supplemented with different concentrations and combinations of four cytokinins (KIN, 2iP, Ads, BAP). These multiple shoots were later developed into normal shoots. The highest rate of shoot proliferation came from MS medium added with BAP 1.5 mg/L. The multiple shoot buds were subcultured into MS medium with BAP (0.5-1.5 mg/L) along with Ads (1.0 mg/L) and GA$_3$ (0.5 mg/L), which gave rise to the highest frequency of shoot proliferation and elongation. The shoots were rooted on MS medium supplemented with 1.75 mg/L IBA.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.159-164
• /
• 2005

Recently, it has demanded high-speed digital circuits as information increase. Therefore, electromagnetic characteristics of compact microwave circuit occurred importantly. And, the effect of the imperfect ground plane on the signal integrity and influence of coupling between two parallel lines for high-speed digital transmission line on the printed circuit board is investigated by FDTD simulations in 3-D electromagnetic analysis method. The results of FDTD simulation are compared with the ADS simulation in commercial software, analyzed lumped element of modeling and electromagnetic wave's radiation of slot as frequency. As a consequence, when the slot in the ground plane is under microstrip line, it has much effect on propagation of wave.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.133-136
• /
• 2004

AC PDP의 구동방법 중 가장 대표적인 구동 법이라 할 수 있는 ADS 구동 법은 구현이 비교적 용이하고, 안정적인 구동특성으로 인하여 현재 많은 상용 AC PDP의 구동 법으로 널리 채택되고 있다. 본 논문은 현재 AC PDP의 주요 연구 분야 중에 하나인 고속 어드레싱에 관한 새로운 구동파형을 소개하였다. 기존 AD을 구동법은 초기화구간과 어드레스구간 그리고 유지구간이 명확히 분리되어 있어 FULL- HD급 화면을 구현하기 위해서 어드레싱에 소비되는 시간의 감소가 불가피하다. 이러한 문제를 해결하기 위하여 어드레스 펄스폭을 줄여주지만, 이로 인하여 불안정한 어드레싱을 초래하게 된다. AC PDP의 초기화 구간의 파형은 이후의 어드레스 특성에 중요한 영향을 끼치는데, 초기화간에 형성된 priming 입자는 어드레스 방전에 크게 도움을 준다. 본 논문은 초기화구간이 끝난 후 priming 효과가 급격히 떨어지는 80us이후에 벽전하 형성을 돕는 벽전하 가속펄스의 사용으로 짧은 어드레스 펄스폭으로 인한 불안정한 어드레싱을 보완하고, 어드레스 과정 후 유지방전 모드로의 벽전하의 형성을 빠르게 유도할 수 있어 1us의 짧은 어드레스 폭으로도 안정적인 어드레싱을 수행할 수 있도록 하였다.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.17-21
• /
• 2010

In this paper, we have introduced a new way to design low phase noise PLL which can apply to the Ultra wideband as meeting performance requirements based on structure improvement, circuit supplement, upgraded design method. Before development of the PLL, we simulated spectrum power, phase noise, harmonic characteristic by using ADS(Advanced Designed System). And, we compared result between measurement and simulation. Finally, we confirm a satisfying result which meet performance requirements between required standard and measured value. It will be useful for transceiver of service which operate in Ultra wideband.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.11
• /
• pp.39-46
• /
• 2022

Purpose: Visual communication is the act of using elements and components that can be seen. Some of the elements include images, illustrations, drawings, and videos. The purpose of this research is to check if there is the meaningful role of visual communication for emotional marketing plan. Research design, data and methodology: The present author firstly tried to obtain prior knowledge based on numerous previous literature through qualitative content method, investigating and searching related topic in 'Scopus' and 'Google Scholar' which is one of the most famous database. This methodology has already been proved the credibility and conformability by prior researchers. Results: The current study looks at four basic aspects that will assist in analyzing the findings and results from different peer-review articles. The section will cover social media, videos, podcasts, and ads. Conclusions: Several studies also affirmed that increased use of the internet and internet for marketing causes psychological issues among adolescents. Only adults should view some of the marketing ads, but if they pop into an adolescent browser, it may cause some harmful effects. Therefore, the study concluded that moderation of online visual adverts should be done to ensure only the targeted customers view the advert.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.433-440
• /
• 2014

In this study, a method for the low-carbon active distribution system (ADS) planning is proposed. It takes into account the impacts of both network capacity and demand correlation to the renewable energy accommodation, and incorporates demand response (DR) as an available resource in the ADS planning. The problem is formulated as a mixed integer nonlinear programming model, whereby the optimal allocation of renewable energy sources and the design of DR contract (i.e. payment incentives and default penalties) are determined simultaneously, in order to achieve the minimization of total cost and $CO_2$ emissions subjected to the system constraints. The uncertainties that involved are also considered by using the scenario synthesis method with the improved Taguchi's orthogonal array testing for reducing information redundancy. A novel cuckoo search (CS) is applied for the planning optimization. The case study results confirm the effectiveness and superiority of the proposed method.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.117-122
• /
• 2016

Optimizing the number of ad clicks is a large-scale learning problem that is central to the multi-billion dollar mobile advertising industry. There are currently several optimization methods used, including ad mediation and ad positioning. This paper proposes a new method to optimize mobile advertising by using the ad refresh interval. A new metric, which can measure and compare mobile advertising performance, takes into account time limitations. The results achieved from this optimization study could maximize revenue for mobile advertisers and publishers. This research has high applicability. It also lays out a solid background for future research in this promising area.