• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.312-321
• /
• 2013

In this paper, high efficiency control method for flyback inverter with synchronous rectifier(SR) based on photovoltaic AC modules is proposed. In this control method, the operation of SR is classified according to the voltage spike across main switch SP. When the voltage spike across SP is lower than the rating voltage of SP, the operation of active clamp circuit is interrupted for reducing the switching loss of auxiliary switch. In this time, the SR is operated for soft-switching of SP. When the voltage spike across Sp is higher than the rating voltage of SP, the operation of active circuit is activated for reducing the voltage spike. The SR is operated for reducing the conduction loss of secondary output diode. Thus, a switching loss of the main switch can be reduced in low power region, and weighted-efficiency can be improved. A theoretical analysis and the design principle of the proposed method are provided. And validity is confirmed through simulation and experimental results.

• 한국전자파학회논문지
• /
• 제16권6호
• /
• pp.603-614
• /
• 2005

본 논문에서는 CQPSK(Compatible QPSK) 변조 방식을 이용하여 APCO P25 규격을 만족하는 직접 변환 방식 디지털 초협대역 무전기를 구현하였다. 초협대역화에 따른 DC-offset 및 AC-coupling 영향, CQPSK 변조 방식에 대한 전력 증폭기의 비선형 특성을 최소화하기 위한 무전기 RF 트랜시버 설계 및 제작 방안을 제시하였다. 직접 변환 방식 RE 트랜시버 및 DSP 모듈과의 연동 시험 결과 송신기의 경우 36.8 dBm의 PEP에서 FCC 방사 마스크 규격을 만족하였다. PWM 제어 신호에 의한 수신기 AGC 동작 범위는 40 dB 범위에서 선형적으로 동작 하였고, 수신 감도 레벨(-116 dBm)에서도 양호한 음성 통화가 가능하였다. 또한 입력 SNR에 따른 BER 성능 및 주파수 오프셋 변화에 대한 BER 성능 측정 결과 무전기 성능 요구 규격을 만족함을 확인하였다.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.357-361
• /
• 2009

This study performed analysis on the thermal pattern and current characteristics of an LED ((Light Emitting Diode) street lamp. It did this using a TVS (Thermal Video System) to analyze the LED street lamp's thermal pattern, and measured its characteristics using an oscilloscope. The ambient temperature and humidity during the experiment were maintained at $24{\pm}2[^{\circ}C]$ and 50~60[%]. The capacity of the LED street lamp was 120[W] and nine sets of modules were arranged at uniform intervals. On one module, 24 LED lamps were arranged in a radial pattern. The analysis of the thermal diffusion pattern at the front of the LED lamp showed that the maximum surface temperature was approximately $34[^{\circ}C]$. In addition, there was almost no change in the temperature of the upper cover, and the temperature at the side showed a uniform thermal diffusion pattern. The surface temperature of the converter converting AC to DC increased to approximately $46[^{\circ}C]$. The analysis results of the thermal characteristics of one LED indicated uniform thermal characteristics for an initial eight minutes. However, the temperature at the center of the LED increased to approximately $82[^{\circ}C]$ after 12 minutes had elapsed. It can be seen from this that the temperature at the center of the LED was higher than the allowable temperature, $70[^{\circ}C]$ of the insulating material for general electrical devices. Therefore, it is necessary to design a lamp in such a way that the plastic insulating material does not come into contact with or get close to the LED lamp. The voltage of the LED lamp converted by the AC/DC converter was measured at DC 27[V] and the current was DC 13[A]. Consequently, it can be seen that in order to secure an adequate light source, it is important to supply a stable current that was greater than the current of other light sources. Therefore, appropriate radiation of heat is required to secure the stability and reliability of the system.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.1-7
• /
• 2018

This paper is analyzed for the thermal characteristics(1 year) of the 6 components(DC breaker, DC filter(including capacitor and discharge resistance), IGBT(Insulated gate bipolar mode transistor), AC filter, AC breaker, etc.) of a photovoltaic power generation-based PCS(Power conditioning system) below 20 kW. Among the modules, the discharge resistance included in the DC filter indicated the highest heat at $125^{\circ}C$, and such heat resulting from the discharge resistance had an influence on the IGBT installed on the rear side the board. Therefore, risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet is conducted for classification into top 10 %. According to thermal characteristics and FMEA, it is necessary to pay attention to not only the in-house defects found in the IGBT, but also the conductive heat caused by the discharge resistance. Since it is possible that animal, dust and others can be accumulated within the PCS, it is possible that the heat resulting from the discharge resistance may cause fire. Accordingly, there are two options that can be used: installing a heat sink while designing the discharge resistance, and designing the discharge resistance in a structure capable of avoiding heat conduction through setting a separation distance between discharge resistance and IGBT. This data can be used as the data for conducting a comparative analysis of abnormal signals in the process of developing a safety device for solar electricity-based photovoltaic power generation systems, as the data for examining the fire accidents caused by each module, and as the field data for setting component management priorities.

• 디지털콘텐츠학회 논문지
• /
• 제18권5호
• /
• pp.895-904
• /
• 2017

본 논문에서는 1인 가구를 대상으로 전기 안전, 전기 에너지 소비 관리 그리고 비상시 네트워크를 연결하여 예약된 연락처에 메시지를 전송하는 사물인터넷 기반의 스마트 콘센트 시스템 구축 방식을 제안한다. 제안된 스마트 콘센트 시스템은 서버와 모듈, 어플리케이션, WiFi AP 수신기 사이에 패킷 데이터와 프로토콜을 파싱하여 구현된다. 통신을 위해 구축된 WiFi AP는 콘센트 뿐 만 아니라 가스 차단, 도어락 등에 연결하여 사용하는 것이 가능하다. 또한 제안된 방식은 AC 전류센서(SCT-013)를 통해 받아온 해당 콘센트의 전력량을 실시간으로 수신하여 원격 모니터링 기능을 제공할 수 있다. 스마트 콘센트 시스템은 대기전력 차단 기능과 더불어 전력 사용 자동 분석을 통해 비상시 전력 자동 차단 기능까지 할 수 있을 것으로 기대한다.

• 한국문헌정보학회지
• /
• 제32권3호
• /
• pp.143-156
• /
• 1998

이 논문은 미국 초중고교 교사들을 이용 대상자로 인터넷 상에 산재해 있는 강의안 및 교육자료의 메타데이터 DB를 구축한 GEM 프로젝트에 대한 보고이다. GEM 프로젝트에서는 현재 거의 표준으로 간주되는 더블린 코어의 15개 요소(Elements)를 채택하였고, 여기에 8개 요소를 첨가하여 검색을 원활히 하고자 하였다. GEM 메타데이터 DB의 구축에는 메타데이터 요소들간의 관계를 좀 더 명확히 표현할 수 있는 개념적 데이터 마들링을 사용하였고 메타데이터는 Sybase라는 관계형 데이터베이스에 저장했으며, 이 DB에 웹 인터페이스를 장착하는데에는 Microsoft 액티브 서버 페이지 (ASP) 기술을 이용하였다. GEM 메타데이터의 실제목록은 미국 전역에서 참가하고있는 컨소시엄 회원들에 의해서 이뤄지고 있으며, 그 결과는 인터넷을 통해 Sybase 관계형 데이터베이스에 자동적으로 입력된다. 이 논문에서는 더블린코어, GEM의 개념 및 논리 스키마들을 제시하는 한편, 메타데이터 DB의 구축에 개념적 데이터 마들링을 사용함으로써 얻어지는 장점들을 논하였다. GEM 프로토타입 시스템이 가동되고 있는 URL은 다음과 같다: http://lis.skku.ac.kr/gem/.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.95-100
• /
• 2021

조선소에서 선체 블록과 용접 피더의 위치를 알면 작업자의 위치 정보를 쉽게 얻을 수 있다. 이 데이터는 작업장 안전 모니터링 시스템 구축에 매우 유용하다. 그러나 선체 구조와 용접 공정의 특수성 때문에 작업장에 고정 통신망을 적용하기 어렵다. 본 연구에서는 전용 통신선을 대신할 수 있는 유도 전력선 통신을 선체블록과 같은 금속매체에 적용하는 기술을 검토하였다. 용접기의 전원 케이블에 설치할 유도 결합기로 페라이트 코어를 사용하였고, 금속 블록의 지지대에 체결할 결합기로 나노 결정질 코어를 적용하였다. 제안된 커플러는 COMSOL AC/DC 모듈로 3차원 모델링 하였고 동작 원리를 시각화하기 위하여 유한 요소 해석을 수행하였다. 알루미늄 프로파일을 사용한 금속블록 통신 성능 테스트에서 용접 전극의 블록 접촉으로 통신 채널이 형성되었을 때 대역폭은 6 Mbps 이상 유지되었다.

• 대한간호학회지
• /
• 제30권4호
• /
• pp.1035-1044
• /
• 2000

The purpose of this study was to develop and evaluate an internet based program for nursing informatics. The course subject, Nursing Informatics, was made by a computerized instructional module using the internet. The program was developed after taking into consideration the level of competence and knowledge in the subjects. It was based on 10 steps of the CAI module developed by Alessi and Trollip. The subjects consisted of 76 junior nursing students taking a Nursing Informatics course. Two sets of questionnaires were used for this study. First, a questionnaire was administered to 76 students to collect general information on their experience while using computers and the internet. Secondly, another questionnaire was administrated to 76 students after they took the course. They were asked to evaluate the program in terms of easiness of use, precision of contents, freshness of contents, motivation in learning, effectiveness of learning, enhancement of communication, precision of screen, and interest in the contents. IDs and passwords were given to the students. The students were asked to write their IDs and passwords when they connected to Nursing Informatics (http://hallym.ac.kr/~yhyom/ inform.html). They were led the menu page which was categorized into 8 icons (i. e., syllabus, lecture notes, quick test, Q & A board, assignment, on-line test, related web sites and mailing lists) after confirming their IDs and passwords. The students' responses were very positive. This program was a very useful in increasing the effectiveness of learning and motivation in the students. Suggest to be use for other nursing courses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2038-2040
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and subway are now being used extensively to protect overvoltage due to lightning. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrestor and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock, pressure rise. etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

• 센서학회지
• /
• 제28권5호
• /
• pp.311-317
• /
• 2019

Rotating devices are commonly installed in power plants and factories. This study proposes a self-powered sensor node that is powered by converting the vibration energy of a rotating device into electrical energy. The self-powered sensor consists of a piezoelectric harvester for self-power generation, a rectifier circuit to rectify the AC signal, a sensor unit for measuring the vibration frequency, and a circuit to control the light emitting diode (LED) lighting. The frequency of the vibration source was measured using a piezoelectric-cantilever-type vibration frequency sensor. A green LED was illuminated when the measured frequency was within the normal range. The power generated by the piezoelectric harvester was determined, and the LED operation was assessed in terms of the vibration frequency. The piezoelectric harvester was found to generate a power of 3.061 mW or greater at a vibration acceleration of 1.2 g ($1g=9.8m/s^2$) and vibration frequencies between 117 and 123 Hz. Notably, the power generated was 4.099 mW at 122 Hz. As such, our self-powered sensor node can be used as a module for monitoring rotating devices, because it can convert vibration energy into electrical energy when installed on rotating devices such as air compressors.