• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1158-1160
• /
• 2002

In this paper, we presents sliding surface design techniques using the virtual state. This sliding surface has same dynamic of nominal system and permit application with other controller. If select initial value of the virtual state properly, problem of reaching phase disappears. And applied in AC servo motor's speed control to show performance of proposed sliding mode control techniques.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.211-214
• /
• 2002

The detection of tool wear is very important in an automated manufacturing system. This paper presents a tool condition monitoring system based on the wavelet transform analysis of the AC servo motor current in a milling process. The current measurement is relatively simple and does not affect machining operations. The discrete wavelet transform was used to decompose the current of a spindle AC servo motor in the time and frequency domain. The feature vectors were extracted from the decomposed signals and compared to clarity normal and wear conditions. The results show the feasibility of the wavelet transform analysis for the tool condition monitoring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.53-55
• /
• 1988

The application of Sliding Mode Control for inproving the dynamic response of a Multi-Phase-Bipolar (MPB) Brushless DC motor based position Brushless DC motor system is presented. Sliding Mode Control gives fast dynamic response with no overshoot and zero steady state error. It has the important feature of bins highly robust. A design procedure is outlined for the Sliding Mode Controller for a MPB Brushless DC motor. Digital computer simulation of the overall position control system is carried out using a time domain model in the d-q reference frame.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.148-152
• /
• 2000

Detection of tool wear is very important in automated manufacturing. This paper presents tool condition monitoring system based on the wavelet analysis of the AC servo motro current in drilling and milling process. The current measurement system is relatively simple and its mounting will not affect machining operations. The discrete wavelet transform was used to decompose the current signal of a spindle AC servo motor in time - frequency domain. The feature vectors were extracted from the decomposed signals and compared for normal and wear condition. The results show the possibility for the effective application of wavelet analysis to tool condition monitoring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.258-263
• /
• 1989

The configuration of Brushless DC moter is similar to the permanent magnet Synchronous moter. Power transistors are oftenly used to supply the switching by feedback signals of rotor positioning sensors. Brushless DC moter have been used in Aerospace and Robotics where the electromagnetic noise or the sparking of the commutator contact can not be tolerated and long - lived maintenance - free operation is required. This paper describes the design of the microprocessor - based controller for the Brushless DC moter. The controller is designed to operate for the constant torque generation and variable speed control using sinusoidal PWM inverters and resolvers as rotor positioning sensors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.913-916
• /
• 1990

In this paper, attempts have been made to control AC synchronous servo motor used as actuators of joints of the FARA robot with high dynamic performance and precise positioning. The AC synchronous servo motors used in FARA robots have resolves as position sensors. Resolver to digital converters are used in order to obtain the information of rotor speed and position from resolver outputs. The proposed joint position control system consists of four speed controller and one position controller. Analog methods are used in the position controller, while digital methods are used in the position controller. For precise position control, PID control algorithm and interpolation functions are executed in two 16 bit microprocessors with sampling rate 2ms. Experimental results show that the proposed joint position control system can be effectively applied to industrial robots in order to obtain high dynamic performance and precise positioning. The proposed joint position control system is being used in the control of FARA robots of Samsung Electronics.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1405-1409
• /
• 1990

Generally, the required control functions for the industrial auto trimming sewing machines are the sewing speed control with pedal input, the up/down stopping-position control of the needle, the automatic sewing according to the memorized sewing pattern including the number of stitches, and etc. We developed a new type of AC servo motor controller, which suffices for all the above functions. The developped controller is working well, and the performances are very good for the practical use.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.351-354
• /
• 1987

In this paper, an adaptive control scheme is applied to the speed control system of a synchronous AC servo motor. The adaptive control system using Ioannou's modified adaptation law is shown to be robustly stable in the presence of current control error and load torque disturbance. The computer simulation demonstrates the rapid compensation of rotor speed deviation due to load torque disturbance.

• 한국컴퓨터정보학회논문지
• /
• 제22권10호
• /
• pp.1-7
• /
• 2017

In this paper, the separation force measuring system is developed. The separation force aries due to adhesive strength between semiconductor epoxy molding compound(EMC) and the metal plate in semiconductor formed plate. In general, when removing the metal plate in semiconductor formed plate from semiconductor epoxy molding compound, excessive strength can result in a increase in semiconductor defect rates, or conversely, if too little force is exerted on the metal plate in semiconductor formed plate, the semiconductor production rates can decrease. In this study, the design criteria for the selection of the AC servo motor, the role of the ball screw, the relationship between the load cell and the ball screw, and the rate of deceleration are given. In addition, minimizing the reject rate of semiconductors and maximizing the semiconductor production rate are achieved through the standardization of the collected separation force data measured by the proposed system.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.31-36
• /
• 2007

Effect of coulomb friction and backlash on the single loop position control has been studied for the precision position control. We have showed the limit cycle on the single loop system which used a ball screw that had the backlash. Also, we have made an inner loop with a classical velocity and torque controller which was forcing the current of d axis to be zero by using a permanent-magnet synchronous motor and composed the outer loop with linear encoder for sensing a position of the loader. Also, we have used least squares fit(LSF) observer for reducing noise when we got velocity from position outputs. We have shown a good result by using the dual loop through simulation and experiment.