• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 춘계종합학술대회
• /
• pp.371-376
• /
• 1998

This paper describes an approach to a speed estimation method to remove speed sensor of underwater robot's AC drive systems. AC motors have been widely used in the field of underwater robot's manipulator or propulsion system. Most of these AC motors for underwater use have usually filled oil to compensate the high pressure in deep-sea operation, where a resolver is adopted to feed back the speed of rotor But this kind of speed feedback devices gives rise to some defects arising from their mechanical complexity and numerous signal lines; a resolver needs 6 or 7 signal lines for proper operation. This paper presents a speed estimation method to improve these problems of induction motor, which is adopted as a prototype of AC motor. The proposed speed estimation method is based on the RFO(rotor flux orientation) vector control method of voltage-fed AC drives. Using the controller of voltage-fed AC drives, it is unnecessary to measure the voltage for the estimation of rotor speed, which reduces the effects of measurement error Numerical simulation is carried out to investigate the validity of the method and the effects of rotors resistance variation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권7호
• /
• pp.373-379
• /
• 2006

The low-voltage induction motors have been widely driven by IGBT PWM inverters, ever since it was used to apply variable speed drives. Recently, the insulation failures of the stator windings become critical problems due to the high ratio of dv/dt in IGBT PWM inverters. In this paper, the detailed insulation tests on the IGBT PWM inverter fed induction motor are carried out. Five different types of insulation techniques are used to ti induction motors. The change of the insulation characteristics such as partial discharge, AC current, capacitance, and dissipation factor are compared. respectively In addition, insulation breakdown tests using the high voltage pulse are performed, and corresponding breakdown voltages are analyzed.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1657-1662
• /
• 2017

Rotor bar faults in induction machines, which are a part of main distribution of power system, can even stop the entire system by causing contact between a stator and a rotor. There are two methods of diagnosing rotor bar faults in induction motors, online and offline tests, and existing diagnosis methods have many limitations which can lead to misdiagnosis. This paper proposes a potable rotor bar faults diagnosis system based on single phase rotation test, one of offline test methods, which detects rotor bar faults through impedance interpretation by exciting AC current in a stator winding. The test was conducted on a motor of 0.4kW in the laboratory and a motor of 1500kW in industry field.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.3-6
• /
• 2001

This paper designs a drive for high efficiency of the 3-phase IM (induction motor) for FCU(Fan Coil Unit). The speed control system of 3-phase IM for FCU has been implemented by a TMS320LF2406 DSP chip. The DSP TMS320LF2406, which include the most peripheral circuit for control of the Industrial motor suitable for AC motor drive. This type of the controller can be obtained low cost and high reliance. The proposed drive system of the 3-phase IM for the FCU is verified by simulation. The results show the speed control characteristics of the control strategy Proposed for 3-Phase IM drive.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.199-205
• /
• 2012

This paper propose a improved parameter estimations of five-phase squirrel-cage induction motor(IM) for speed control system on field oriented control(FOC). In order to high performance control of ac the motors using a FOC and DTC(direct torque control) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, rotor position and speed estimation, and so on. We are suggest a estimation method of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental. There are results of stator winding test, no-load test, locked rotor test, and obtained equivalent circuits using manufactured experimental apparatus. For presenting the superior performance of the speed control system in adapted the parameters, experimental results are presented using a 32-bit fixed point TMS320F2812 DSP with 1.5[KW] IM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.746-748
• /
• 1987

A volocity and an efficiency of an induction motor are lower than those of a DC motor. But in the control, the utility of an AC motor is more enlarged with the development of inverter. But unfortunately, in using the induction motor, it include a lot of harmonics because of switching of semi-conductor devices(SCR or Tr) in the inverter. In PCR, as the change of a firing angle $\alpha$, harmonics are changed. Hence, in this thesis analyze the harmonics and provide the region of it's application when PWM and 6-step applied to inverter. Of course, frequencies of inverter changed. Especially, in PWM a carrier ratio is changed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.80-86
• /
• 1993

This paper presents an advanced AC drive system used in electric vehicles. The system consists of a drive motor, a PWM transistorized inverter, a PCL-812PG data card, and a controller. This paper describes a design method for RSPWMSS and PID controller. This controller system is implemented on computer and applied to drive motor(induction motor), yielding satisfactory result.

• 융합신호처리학회논문지
• /
• 제5권3호
• /
• pp.210-215
• /
• 2004

교류 서보전동기 동적 모델은 비선형이고 2차 저항이 변동영향이 많다. 이러한 복잡한 제어는 견실제어가 요구된다. 이러한 시스템의 동특성은 슬라이딩 모드제어를 사용함으로 파라미터나 외란 변동에 대하여 견실성을 달성할 수 있다. 본 논문은 교류 서보전동기에 의한 위치제어에 슬라이딩 모드 제어의 적용을 나타내었다. 제어방법이 유도되고 제어시스템이 설계되었다. 교류 서보전동기의 견실제어를 위해 외부 부하 파라미터에 기초한 설계방법이 제안되었다. 제안된 제어방법은 가변구조 제어기와 슬립주파수형 벡터제어에 기초하여 주어졌다. 시뮬레이션 결과는 관성모우먼트, 점성마찰 및 부하외란 변동에 결실함을 나타내었고 슬라이딩 모드를 적용한 제안된 설계방법이 유용한 것을 구명한다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.142-152
• /
• 2016

Common mode voltage (CMV) generation is a major problem in switching power converter fed induction motor drive systems. CMV is the zero sequence voltage generated due to the switching action of power converters. Even a small magnitude of CMV with a high rate of change may circulate large bearing currents which may damage a machine's bearings and shorten its life. There are several methods of controlling CMV. This paper presents 3-level sinusoidal pulse width modulation based techniques to control the magnitude and rate of change of CMV in multilevel AC-DC-AC drive systems. Simulation and experimental investigations have been presented to validate the performance of proposed technique to control CMV in 3-level neutral point clamped inverter based AC-DC-AC system.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.572-583
• /
• 2016

In view of the speed control characteristics of induction traction motors and the problems of direct torque control (DTC) algorithms in current applications, this paper presents a DTC algorithm characterized by a symmetrical polygon flux control and a closed loop power control in the constant-torque base speed region and constant-power field-weakening region of induction traction motors. This algorithm only needs to add a stator flux control algorithm to the traditional DTC structures. This has the benefit of simplicity, while maintaining the features of traditional algorithms such as a rapid dynamic response, uncomplicated control circuit, reduced dependence on motor parameters, etc. In addition, it obtains a smoother flux trajectory that is conducive to improvement of the harmonic elimination capability, the switching frequency utilization as well as the torque and power performance in the field-weakening region. The effectiveness and feasibility of this DTC algorithm are demonstrated by both theoretical analysis and experimental results.