• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.30-38
• /
• 2012

We investigated the effects on soil microbial diversity and the growth promotion of red pepper resulting from inoculation with a microbial agent composed of Bacillus subtilis AH18, B. licheniformis K11 and Pseudomonas fluorescens 2112 in a red pepper farming field. Photosynthetic bacteria, Trichoderma spp., Azotobacter spp., Actinomycetes, nitrate oxidizing bacteria, nitrite oxidizing bacteria, nitrogen fixing bacteria, denitrifying bacteria, phosphate solubilizing bacteria, cellulase producing bacteria, and urease producing bacteria are all indicator microbes of healthy soil microbial diversity. The microbial diversity of the consortium microbial agent treated soil was seen to be 1.1 to 14 times greater than soils where other commercial agent treatments were used, the latter being the commercial agent AC-1, and chemical fertilizer. The yield of red pepper in the field with the treated consortium microbial agent was increased by more than 15% when compared to the other treatments. Overall, the microbial diversity of the red pepper farming field soil was improved by the consortium microbial agent, and the promotion of growth and subsequent yield of red pepper was higher than soils where the other treatments were utilized.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.564-570
• /
• 2007

This study investigated the treatment of liquid waste containing highly concentrated iron(III)-ethylenediaminetetraaceticacid (Fe(III)-EDTA) of 70,000 mg/L by an underwater electrical discharge process using low voltage and high current. When AC voltage is applied to the discharging electrode with the other electrode grounded, the temperature of the liquid waste around the discharging electrode rapidly increases, and at the same time, hydrogen and oxygen gases are formed at the electrode as a result of electrochemical reactions. Ultimately, gases formed by vaporization of water and electrochemical reactions cover the electrode. Since the liquid waste is electrically conductive, it elongates the ground electrode up to the border of the gas layer, where electrical discharge occurs. Without hydrogen peroxide, electrical discharge was able to remove about 50% of Fe(III)-EDTA. As the concentration of hydrogen peroxide added increased, the removal efficiency of Fe(III)-EDTA increased. When the molar ratio of hydrogen peroxide to the initial Fe(III)-EDTA was higher than 24.7, more than 80 g of Fe(III)-EDTA was removed with an energy of 1 kWh. A comparison between tungsten and steel electrodes showed that electrode material did not affect the Fe(III)-EDTA removal. In the present underwater electrical discharge process, the removal of Fe(III)-EDTA was completed within 30 min at molar ratios of hydrogen peroxide to the initial Fe(III)-EDTA higher than 24.7.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.495-500
• /
• 2009

Actinide sorption to the geological materials can reduce the mobility and bioavailability of radionuclides released to the environment through the development of nuclear weapons and nuclear energy. Under circumneutral pH conditions, actinide sorption can be enhanced by phosphate anions sorbed on oxide mineral surfaces as indicated by the sorption of trivalent lanthanide ions ($Ln^{3+}$), the chemical analog for trivalent actinide ions ($Ac^{3+}$). In this paper, we examined a ternary sorption system of trivalent europium ions ($Eu^{3+}$) sorbed onto boehmite (${\gamma}$-AlOOH) surfaces pre-sorbed with phosphate anions (${PO_4}^{3-}$), using extended X-ray absorption fine structure (EXAFS) spectroscopy. In the Eu-$PO_4$-boehmite ternary sorption system, $EuPO_4$ surface precipitates were formed as implicated by Eu $L_{III}$-edge EXAFS spectroscopy. Phosphorus K-edge EXAFS fingerprinting indicated a bidentate mononuclear surface complex formation of phosphate sorbed on boehmite surfaces as well as $EuPO_4$ surface precipitate formation.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.413-421
• /
• 2005

As the population of HDTV is growing, among many useful features of modern set top boxes (STBs) or digital video recorders (DVRs), video browsing, visual bookmark, and picture-in-picture capabilities are very frequently required. These features typically employ reduced-size versions of video frames, or thumbnail images. Most thumbnail generation approaches generate DC images directly from a compressed video stream. A discrete cosine transform (DCT) coefficient for which the frequency is zero in both dimensions in a compressed block is called a DC coefficient and is simply used to construct a DC image. If a block has been encoded with field DCT, a few AC coefficients are needed to generate the DC image in addition to a DC coefficient. However, the bit length of a codeword coded with variable length coding (VLC) cannot be determined until the previous VLC codeword has been decoded, thus it is required that all codewords should be fully decoded regardless of their necessary for DC image generation. In this paper, we propose a method especially for fast DC image generation from an I-frame using multiple-symbol lookup table (mLUT). The experimental results show that the method using the mLUT improves the performance greatly by reducing LUT count by 50$\%$.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.462-466
• /
• 2010

The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.173-180
• /
• 2000

The intern1 spacer regions (ISR) between the 16s and 23s $1_RNA$ genes of Aeronzonus iwonii blogroupsobria and A. caviae were investigated by PCR fragment length typing and DNA sequencing. A. iwonii bv.sobria has a speciIic 16s-23s pattern of 2-4 fiagments ranging Goin 479-539 bp, with the exception of thespecies Aeron7onns cmiae, which has 3 fragments ranglog from 470-602 bp. In all of the.4 vei*onii bv. sobr,iaand A, caviae strains examined in this study, the 470-481bp Tragnent, designated TSR-1, invariably contained $tDNA^{uc(GAT)$ and $tDNA^{Ala(TGC)$ in contrast to ISR-2 (513-525 bp). ISR-3 (537-539 bp) and ISR-4 (568-602 bp)containing TEX>$tDNA^{Olu(ITC)$ A stretch of 20 nucleotides (178-197 bp) in the ISR-4 was conserved only wit11mA.caiiue, from which the A. caiiae specific primer, named prAC-F, was designed and used for PCR with aAcaviae coimnon reverse primer A PCR product of 450 bp was apparent alnong I , caiizne strains, but not ii1.4.ijeronii bv. sob~ia strains. The PCR product was oot detected t"-om strains belonging to A. hjili-o~~hila, Ebrio,aud the family Ef\ulcornertei,obncteriaceae. This study provides the first molecular tool for mdentifying the species 8.caviae.ing the species 8. caviae.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.231-237
• /
• 2005

The sizes and structure of micelles and vesicles formed in ammonium dodecyl sulfate (ADS)/octadecyl trimethyl ammonium chloride (OTAC) mixed aqueous solutions were analyzed by small-angle neutron scattering. In micellar regions of pure ADS and OTAC aqueous solution, the spherical micelles were formed at given concentrations and their sizes were 40 and $61{\AA}$, respectively. The structure transition of pure micelles occurred above 300 mM due to the constancy of the intermicellar distance above 250 mM. The coexisting region of mixed micelles and vesicles in phase diagram of mixed system was also assured. It was investigated that vesicle formed spontaneously took a bilayer structure. The lamellar thickness of vesicles decreased with increasing concentration of vesicle samples. However, the size could not be determined for mixed micelle and vesicle above 100 nm due to limitation of low q ranges. Finally, The 9 mM solution of ADS mole fraction 0.9 (${\alpha}$=0.9) showed bilayer structure compared to phase diagram classified into mixed micelle.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.734-741
• /
• 1998

Electrode characteristics were studied in the interface between sample solutions and $K^+$ ion selective PVC membrane electrodes containing neutral carriers, dibenzo-18-crown-6(D18Cr6) and valinomycin(Val). The effect of doping of base electrolytes, the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, and concentration variation of sample solution on the response characteristics of electrode such as the measured Nernstian slope, the detection limit, the linear response range, and potentiometric selectivity coefficients, were studied. In order to synthesize the membrane D18Cr6 and Val as neutral carriers were used, and complex between the carrier and $K^+$ ions were used as active materials. PVC membrane electrodes were made of plasticizers (DBP, DOS, and DBS), the base electrolyte[potassium tetraphenylborate(KTPB)], and solvent(THF). The chemical structure of carrier D18Cr6 was best for electrode and ideal electrode characteristics were appeared especially in case of doping of TPB. The optimum carrier content was about 3.23 wt % in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the electrode characteristics was improved. But its characteristics were lowered below the optimum membrane thickness because of the elution of carrier, deterioration of membrane strength, etc. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were in the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.

• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.108-116
• /
• 2003

To investigate bacteria with algal Iytic activities against Anabaena cylindrica when water blooming occurs and to study enzyme profiles of alga-Iytic bacteria, various bacterial strains were isolated from surface waters and sediments in eutrophic lakes or reservoirs in Korea. Abacterial strain AK-07 was characterized and identified as Acinetobacter johnsonii based on its16S rDNA base sequence. When AK-07 was co-cultivated with A. cylindrica, bacterial cells propagated to $8\;{\times}\;10^8$ cfu $ml^{-1}$ and Iyses algal cells. However, culture filtrates of AK-07 did not exhibit algal Iytic activities. That suggesting the enzymes on the surfaces of the bacterium might be effective algal Iytic agents to cause Iyses of cells. Acinetobacter johnsonii AK-07 exhibited high degradation activities against A. cylindrica, and formed alginase, caseinase, lipase, fucodian hydrolase, and laminarinase. Moreover, glycosidases for example ${\beta}$-galatosidase, ${\beta}$-glucosidase, ${\beta}$-glucosaminidase, and ${\beta}$-xylosidase, which hydrolyzed ${\beta}$-0-glycosidic bonds, were found in cell-free extracts of A. johnsonii AK-07. Other glycosidase such as ${\alpha}$-galctosidases, ${\alpha}$-N-Ac-galctosidases, ${\alpha}$-mannosidases, and ${\alpha}$- L-fuco-sidases, which cleavage ${\alpha}$-0-glycosidic bondsare not detected. In the results, enzyme systemsof A. johnsonii AK-07 were very complex to do-grade cell walls of cyanobacteria. The polysaccharides or peptidoglycans of A. cylindrica maybe hydrolyzed and metabolized to a range of easily utilizable monosaccharides or other low molecular weight organic substances by strain AK-07 of A. johnsonii.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.979-986
• /
• 2005

Lead (Pb) exposure during development can produce neurological deficits. In this study, the effect of Pb exposure during neonatal development via lactation on anxiety of brain function was investigated. Long-Evans strain rats were raised through two generations. At the birth of the second generation, the dams were subdivided into two groups and supplied drinking water containing either $0.2\%$ Pb (Pb-treated group) or sodium (Na, Control group) acetate until weaning. Rats were sacrificed at 3 (weaning) and 11 weeks (maturity) for brain Pb and fatty acid analysis. Motor activity and elevated plus maze tests were initiated at 9 weeks. The brains in the Pb-treated group at weaning and maturity contained 1486$\pm$98 and $270{\pm}46$ ng Pb/g, respectively The control group showed the background level of Pb ($3.7{\pm}1.0_{ng}$ Pb/g) in both ages. The alterations in brain fatty acid composition induced by Pb exposure were more evident in 3 wks old than 11 wks old. For example, in 3 wks old, the percentages of $18:2_{n-6}$, $20:2_{n-6}$ and $18:2_{n-6}$ were decreased in the Pb-treated group with an increase in $20:4_{n-6}$ In motor activity test, there was a tendency of hyperactivity in the Pb-treated group compared with the control group but the difference was not significant. In elevated plus maze test, the Pb-treated group showed fewer numbers of visits to the open arms (P < 0.05), indicating that Pb exposure may lead to anxiogenic effect.