• The Journal of Engineering Geology
• /
• v.34 no.1
• /
• pp.137-146
• /
• 2024

The pertinent Korean Industrial Standard (KS F) requires that rocks dried at 105 ± 5℃ be taken out of the oven into air and weighed on a scale. However, when rocks are exposed to air after the drying process, they absorb moisture, meaning that their weight will increase. In this study, eight cubic samples of Hwangdeung granite of different sizes were used to measure and compare the dry weight. The dry singularity weight measured in air was smaller than that measured in the drying oven. The difference in dry weight showed a positive correlation with sample size. Conversely, the difference in dry weight per unit weight of rock showed a negative correlation with sample size. The weight of a rock sample exposed to air is determined by the magnitude of the influence of convection currents occurring around the heated rock and the influence of moisture absorption in air. A singularity occurs when the magnitudes of these two effects are equal. The larger the rock sample, the longer the time taken for the singularity to occur, the greater the weight loss of the sample, and the longer the time taken for the sample to return to the initially measured weight on account of the greater moisture absorption for larger samples than smaller samples. In the future, research into the singularity and dry weights measured inside the drying oven will help to identify and address the limitations of the current KS F testing regulations.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.134-138
• /
• 2015

BACKGROUND: In recent years, several researchers have focused on odour control methods to remove the harmful chemicals from chemical accidents and incidents. The present work deals with the system development of the hazardous. METHODS AND RESULTS: For on-site removal of hazardous gaseous materials from chemical accidents, mobile vortex wet scrubber was designed with water vortex process to absorb the gas into the water. The efficiency of the mobile vortex wet scrubber was evaluated using water spray and 25% ammonia solution. The inlet air velocity (gas flow rate) was according to the damper angle installed within the hood and with increase of gas flow rate, consequently the absorption efficiency was markedly decreased. In particular, when 25% ammonia solution was exposed to the hood inlet for 30 min, the water pH within the scrubber was changed from 7 to 12. Interestingly, although the removal efficiency of ammonia gas exhibited approximately 80% for 5 min, its efficiency in 10 min showed the greatest decrease with 18%. Therefore, our results suggest that the ammonia gas may be absorbed with the driving force of scrubbing water in water vortex process of this scrubber. CONCLUSION: When chemical accidents are occurred, the designed compact scrubber may be utilized as effective tool regarding removal of ammonia gas and other volatile organic compounds in the scene of an accident.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.317-327
• /
• 2013

Air pollution and artificial heat of urban areas have caused the urban heat island in which asphalt pavements absorb solar heat during the daytime and release the heat at night. Hence, in order to improve the environment of urban areas, it is necessary to examine cooling pavements that can reduce heat on road pavements in urban areas. The application of temperature insulation paints on road pavements require to reduce black brightness for visibility, to increase the reflection rate of infrared light and minimize the reflection rate of visible light. In the study, one part of Acrylic-emulsion was used as a main binder, and the changes in black brightness and the changes of addition ratio (0%, 15%, 30%) of hollow ceramics, as well as kinds of paints (carbon black pigment, mixed mineral pigment) were selected as the main experimental factors. The performance of temperature reduction of cooling pavements was analyzed through the reflection rate of spectrum, the reflection rate of solar heat, and the lamp test. Abrasion resistance, UV accelerated weather resistance, and sliding resistance were tested in real situations. In addition, the performance of heat reduction of testing pavements covered with high-reflection paints was analyzed by using an infrared camera. As the test results, when using mixed mineral paints and hollow ceramic of 30%, the reflection rate of spectrum was 43% in the area of near-infrared ray and 17% in the area of visible light at black brightness of $L^*$=42.89 and the reflection rate of solar heat was 27.5%. Total color difference was ${\Delta}E$=0.27 in the test of UV Accelerated Weather Resistance, indicating almost no changes in color. BPN was more than 53 when scattering #2 and #4 silica sand of more than $0.12kg/m^2$. In Taber's abrasion resistance test, abrasion loss was up to 86.4mg at 500 rotations. The performance of heat reduction was evaluated using an infrared camera at the test section applying high-reflection paints to asphalt pavements, in which the results showed that the temperature was reduced by $12.7^{\circ}C$ on CI-30-40 cooling pavements ($L^*$=38.76) and by $14.2^{\circ}C$ on CI-30-60 cooling pavements ($L^*$=57.12).

• Journal of Genetic Medicine
• /
• v.4 no.2
• /
• pp.186-189
• /
• 2007

More than 6,000 rare disorders including genetic diseases have been reported. Of them, 1,500 diseases (1,211 for clinical diagnosis and 289 for research only) are technically possible for genetic testing. In Korea, since 2005, only 63 genetic diseases is permitted for prenatal genetic testing by the "Bioethics and Biosafety Law". The article 25 in the law prescribes 63 genetic diseases without clear indication for its selection and inclusion criteria. In EU, USA, and other foreign countries, however, there is no provision in the statute on prenatal genetic testing; it is not restricted by a law. Recently, a woman (Mrs. L, 38y) who is a carrier for Menkes disease made an appeal to a government for an amendment of the "Bioethics and Biosafety Law" prohibiting the prenatal diagnosis of her pregnancy at risk for Menkes disease. Menkes disease (MNK) is an X-linked recessive disorder characterized by neurodegeneration, connective tissue defects and hair abnormalities, and no effective treatment is available yet. The prevalence rate of MNK is one in about 250,000 live births. Menkes syndrome patients fail to absorb copper from the gastrointestinal tract in quantities adequate for meeting nutritional needs. These needs seem particularly acute during the initial 12 month of life, when the velocity of brain growth and motor neurodevelopment. Most of pts. die around 3yrs. of age. Mrs. L had a boy with Menkes disease who died at 2y.o. in 2001. Subsequent pregnancy in 2003, she was able to have prenatal genetic testing for mutation of the Menkes (ATP7A) gene and delivered a healthy baby boy. Now, She is pregnant again and wants to have prenatal diagnosis. however, this time, she was not allowed to have any more because Menkes disease is not included in 63 genetic diseases permitted by the law for prenatal genetic testing, in spite of the fact that she is a Menkes disease carrier and her pregnancy is at risk to have an affected baby. This case shows the practical problem of the legal restriction for prenatal genetic testing in Korea. In this study, we report a arguable case and discuss the controversial issues in the legal restriction for prenatal genetic testing in Korea.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.226-236
• /
• 1998

If the lowest leaves of the cucumber were removed or training cultivable method was changed, a computer vision system could divide well the cucumber fruit from the others, and also an end-effector could reach and grip cucumber fruit and cut well its fruit stalk. Therefore, this study investigated whether removal leaves and training cultivable method of a cucumber could affect its growth and yield. They can help to be designed the vision system and the end-effector. A cucumber fruit grew by 6-l5cm long for 2 days regardless of removing leaves. Removal leaves didn't affect growth of cucumber fruit. Number of cucumber fruit was produced within 10% different values by three methods (A, B, C) of removal leaves. The first grade rate (best quality) of 4 B and C was 56.7%, 53.1%, 56.3% respectively. Consequently, proper removal leaves were better than traditional way, which does not remove a leaf, because they make cucumber plant ventilate more freely and absorb more light.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.209-218
• /
• 2000

This study was conducted to determine the content of trace metals in crops cultivated in Han-riverside, Anyang stream, Tan stream, and Jungryang stream. Trace metals (Pb, Cr, Cd, Fe, Zn, Cu, Hg) were detected in 36 crops, 285 samples by Atomic Absorption Spectrophotometer and Mercury Analyzer. The average concentration of trace metals in crop samples was in the order of Fe (34.592 ppm)>Mn (11.071 ppm)$\geq$Zn(8.853 ppm)>Cu(1.795 ppm)>Cr(0.237 ppm)>Pb(0.100 ppm)>Cd(0.011 ppm)>Hg(0.003 ppm). In crop samples, the contents of Fe, Cu, Mn, and Zn, which ranges were 0.004-203.083 ppm, 0.017~22.727 ppm, 0.000~74.373 ppm, 0.080~37.166 ppm, respectively, were relatively higher than those of Pb, Cd, Cr, and Hg, which ranges were 0.000~0.654 ppm, 0.000~0.270 ppm, 0.000~l.229 ppm, 0.000~0.037 ppm, respectively. The concentration of trace metals in crop samples was in the order of leafy vegetables > stem vegetables > root vegetables > fruity vegetables. In the root vegetables, such as radish, the content of Pb was leaf(0.055 ppm)>root(0.035 ppm), that of Cr, leaf (0.118 ppm)>root(0.031 ppm), that of Cd, leaf(0.004 ppm)>root(0.001 ppm), that of Hg, leaf(0.004 ppm)>root(0.001 ppm). As the results, it could be thought that root is the organ which doesn't accumulate the heavy metal ions, but absorb them.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to propose plans to increase the number of urban parks as a way to help absorb carbon in order to implement the low carbon green city goals of Gangneung. As a study method, park incentive areas and current park areas were set as parameters and the areas of lacking in park space were categorized according to each indicator. The degree of park shortage was classified by overlapping the park shortage areas. Once the areas needing parks were assessed according to priority, target sites were selected on sites where construction would be actually possible. First, results of analysis showed that Songjeong-Dong and Seongdeok-Dong to the east of the target site lacking park space due to old residences and high population density or industrial use areas, were the most severe in the degree of park shortage. It was also shown that areas with high population density and park shortages included the Ponam-Dong, Okcheon-Dong and Hongje-Dong areas. Accordingly, the east side of the target areas and Hongje-Dong were both considered as high-priority areas needing to increase park space and actual possible target sites were selected for the creation of new, small parks in industrial areas by creating parks in school yards, in facility relocation sites and legal reviews. In addition, analysis indicators of park shortages were re-evaluated according to the securing of the park and it was shown that the problems in park shortages were resolved with the proper positioning of parks. In addition, satisfaction in the area of park per person, $3m^2$ was at a higher than a certain level in all areas except Songjeong-Dong, demonstrating that the park areas were evenly distributed. Areas of park shortage were shown in part of Songjeong-Dong and Seongdeok-Dong. This could be resolved by using alternative park resources such as the adjacent Gyeongpo Provincial Park, the beach and Namdaecheon.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.1
• /
• pp.31-35
• /
• 1975

In order to gain information on the plant characteristics of high yielding paddy from the point of view of mineral nutrition and to learn more about soil conditions under which high yields are produced a number of soil samples collected from the field experiment carried out in The City College of Seoul were analysed. In addition, a laboratory experiment carried out to support the field experiment was also analysed. Results obtained are as follows: 1. Generally, the higher the yield of paddy, the higher is the potassium content in flag leaves, whereas the reverse is true for the content of Ca and Mg in the leaves. From these facts it can conceivably be said that the high yielding paddy should absorb a large quantity of potassium and a lesser quantity of calcium and magnesium in the reproductive stage. 2. Leaves of paddy which produced yields over 600kg/10a (a comparatively high yield in the experiment) contained 30-35mg/100g of potassium, less than 25me/100g of calcium, and 10me/100g of magnesium which brings the ratio of $K/{\sqrt{Ca+Mg}}$ over 5. 3. Correlation studies indicated a remarkable relationship between the paddy yield and exchangeable potassium in soil samples taken after harvesting. A similar relationship was observed between the yield of paddy and $K/{\sqrt{Cae+Mge}}$ ratio of the soil samples. 4. A regression between yield of padcy (Y) and exchangeable potassium (Ke) or $K/{\sqrt{Ca+Mg}}$ in soil samples taken after harvesting was shown to be; Y=183.95+2135.86Ke $$Y=352.45+3114.454\;K/{\sqrt{Ca+Mg}}$$ 5. The regression between exchangeable potassium (Ke) in soil samples taken after harvesting and the amount of lime (L) and potassium (P) to be applied is; $$Ke=0.1246+0.00007037L+0.004444P+0.000004444L{\cdot}P$$.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.47-55
• /
• 1981

Silk textile finishing has been studied for many years by many workers in order to meet more utilities for various endusers. Such studies, however, could not be successful because any natural fibers are hardly change their natures by artificial treating methods. Textile finishing is of course to improve the mechandise qualities and the poor natures of silk so that it may be available as the best textile fiber in the world. Sometimes, famous trade marked textile plays more power than its quality in the silk market, nevertheless, this should be over line of research activities. Meantime, the silk demand has been also transferred from ladies stocking to other clothes since nylon or other synthetic fibers were developed. That is why, the extension of silk demand should be developed by various research works. Specially, silk is known as difficult textile to handle it during washing or ironing process which happened to depress down the silk usage for house wives. In order to solve such problems, the reporter has been worked for many years and now, he believes that he has developed a proper finishing method to coversuch problems. The developed finishing method may be said to eligible with economical aspect and shorten the dry duration after water washing in half against normal silk textile without harming the specific silk nature. As all of us know, silk fiber starts to denature since it was spinned by silkworm and the fiber is formed as overlapped "S" type curves during its concooning process. After it is made as raw silk or sericin silk, it shows as straight line form, but it changes in to waved form in case refining or degumming process in order return to its original spinned form. Such nature is continued during its textile form and ends with hard ironing nature than other textile fibers. Mean while, the silk fiber keeps to continue its denaturing and this is iniciated by repeat of washing and drying which takes many years to reach its final stage, The reporter has found the iniciating denature of silk by his finishing process, with out heat, decreasing the swollen nature which ended with shortening the drying duration after wash. Each washing was carried out by soaking the previously weighed sample in cold water for one hour, then pressed the sample for ten minutes to eliminate its free water component before weighing with same condition. According to this, the treated silk showed much denaturing after the finishing, but the standard silk progressed the denaturing by and by with the repeat of washing and drying, finally reached the same swollen degree of treated silk, Such treating result explains that the treated silk happened to be stebilized nature by the treating immediately. On the other that the treated silk happened to be stebilized nature by the treating immediately. On the other hand, standard silk may reach to such condition by the time of worn out clothes after repeat of washing and drying for many years while the clothes will be no more useful. The decreased swelling nature has brought about the drying period in half against standard silk after all. Not only the tests of tenacity and elongation but also crease resistance recovery, stiffness and shrinkage tests were carried out after each washing and drying which he has found better result on the treated silk textile against the standard silk. The most important thing was to keep the textile feeling of silk by such finishing work before improve any poor nature of silk. The general silk has a nature to absorb smoke or dirt from its surrounding air and reaches to dirty color shade upon such exposure, but the treated one has improved such nature because of its artificial denaturing, another word, it keeps clean longer than the normal silk. Many previous finishing works could improve some specific nature of silk, but it happened to deprave other important natures. The reporters work is, however, specialized to improve the silk to be useful as Wash and Wear Silk without harming its standard natures. So far, this work happened to be a overall innovative finishing method of silk textile.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.992-997
• /
• 2012

This study was conducted to get the basic information for absorb enhancement of accumulated soil nutrients in plastic film house. The grain sorghum (Sorghum bicolor L.) was sowing in plastic film house which soil nutrient accumulated moderately and was cutting at major growth period of sorghum. We were analyzed the regrowth pattern, biomass due to cutting time and amount of plant nutrient of grain sorghum. The obtained results were as follows. The heading date after cutting of sorghum in plastic film house was came to about 35 days. The accumulated of plant height were the longest as 379.4 cm in cutting at milk stage. The total biomass of sorghum in cutting at heading stage was 1.73 ton $10a^{-1}$ in cutting at heading stage. The high grain yields were produced with non-cutting and cutting at 10 leaves stage as 75~113 kg $10a^{-1}$ but the lowest grain yields were the cutting plots at booting stage as below 24 kg $10a^{-1}$. The content of nutrient in sorghum plant was low as progress of growth. The concentrations in aboveground sorghum due to plant parts was in order to leaves > panicle > stalk. The nitrogen content of sorghum was 0.6~0.7% in stalk, 1.5~1.6% in panicle and 1.8~2.3% in leaves. The amount of nutrient absorbed in sorghum was 4.2 kg $10a^{-1}$ in nitrogen, 1.7 kg $10a^{-1}$ phosphorus and 7.7 kg $10a^{-1}$ in potassium and the absorbing different by cutting time in order to booting > non-cutting > panicle formation ${\geq}$ milk ripe > 10 leaves stage.