• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.77-78
• /
• 2020

An alkaline activator was synthesized by dissolving waste glass powder (WGP) in NaOH-4M solution to explore its effects on the Class-C fly ash (FA) and ground granulated blast furnace slag (GGBS) based alkali-activated material (AAM). The compressive strength and porosity were measured, and (SEM-EDX) were used to study the hydration mechanism and microstructure. Results indicated that the composition of alkali solutions was significant in enhancing the properties of the obtained AAM. As the amount of dissolved WGP increased in alkaline solution, the silicon concentration increased, causing the accelerated reactivity of FA/GGBS to develop Ca-based hydrate gel as the main reaction product in the system, thereby increasing the strength. Further increase in WGP dissolution led to strength loss, which were believed to be due to the excessive water demand of FA/GGBS composites to achieve optimum mixing consistency. Increasing the GGBS proportion in a composite also appeared to improve the strength which contributed to develop C-S-H-type hydration.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.21-22
• /
• 2021

This study incorporates fine waste glass (GS) as a replacement for natural sand (NS) in ground granulated blast furnace slag (GGBS) based alkali activated mortar (AAm). Tests were conducted on the AAm to determine the mechanical properties, apparent porosity and the durability based on its resistance to Na2SO4 5% and H2SO4 2% concentrated solutions. The study revealed that increasing GS up to 100 wt%, increased strength and decreased porosity. The lower porosity attained with the incorporation of GS, improved the resistance of mortar to Na2SO4 and thus increasing durability. However, the durability of mortar to H2SO4 solution was negatively impacted with the further reduction of porosity observed with increasing GS above 50 wt.% believed to be caused by the stress induced as a result of expansive reaction products created when the mortar reacted with acid.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.1
• /
• pp.39-48
• /
• 2024

Aviation industry is moving towards the third innovative era of AAM with electric power and AI after the JET-powered era following the Wright brothers' first flights. Research on UAM, eVTOL development, certification, and operations is competitively progressing, primarily in aviation-leading countries, aiming to resolve urban traffic saturation and foster the future aviation industries. This study introduces the concept of the pilot's role transition in operational safety as AI autonomous flight advances, comparing K-UAM operational concept with research from FAA, NASA, and EASA. It is to identify and propose solutions for challenges from the pilot's perspective in developing UAM and its safe operation system. To succeed in Advanced Air Mobility National Project, we suggest the collaboration among industry, academia, and institutions, along with the cooperation between civilians, governments, military, and the need for Urban Air Mobility integrated policies.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.1
• /
• pp.49-60
• /
• 2024

This study used the Unified Theory of Acceptance and Use of Technology(UTAUT) model to find factors that influence consumer acceptance intention toward Vertiport, a physical ground support technology required to implement AAM services. The analysis showed that among the four independent variables, Vertiport's social influence and facilitating conditions have a significant impact on future Vertiport usage behavior. At this point, the public has not yet had actual experience with Vertiport, so there is a limitation of considering it as a future concept based on speculation and measuring acceptance by actual behaviors related to its use (inquiries, information gathering, interest, etc.). Research on acceptance and attitudes toward new transportation methods should be further activated and developed along with future service development. Through the results of this study, we aim to understand the initial public acceptance of Vertiport as a ground-based infrastructure in the AAM field (or UAM) and propose strategic implications for the direction of service development.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.442-449
• /
• 2024

In this paper, we aim to propose a comprehensive framework for cyber threat analysis of urban air mobility (UAM) or advanced air mobility (AAM) communications, navigation, surveillance, and information system infrastructure. By examining potential vulnerabilities and threat vectors, we seek to enhance the security and resilience of UAM infrastructure. We conduct a detailed cyber threat analysis to identify and categorize various types of cyber threats, assess their impact on the CNSi systems, and evaluate the vulnerabilities within these systems that may be exploited by such threats. This analysis will provide valuable insights for stakeholders involved in the deployment and operation of UAM systems, ultimately contributing to the safe and efficient integration of urban air transportation.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.32 no.4
• /
• pp.13-28
• /
• 2019

Objectives : The purpose of this study is to report the effectiveness of Korean medical treatment on 222 patients with alopecia areata. Methods : The subjects of this study were 222 patients who had received Korean medical treatment among the patients who visited the Balmer's Korean Medicine Clinic from January 1, 2016 to December 31, 2017. The extent of the alopecia areata was measured every month to determine the improvement. We analyzed the relationship between the types of alopecia areata, the extent of hair loss, duration of illness, age at first visit, and the treatment of alopecia areata. Results : 1. There were 100 males(45.0%) and 122 females(55.0%). The mean age of patients was 35.3 years old. 2. Of the 222 patients, 142(64%) were "cured". 31(14%) showed "good", 21(9.5%) showed "fair", 28(12.6%) showed "poor" improvement. 3. According to clinical records, of the 64 patients with alopecia areata(AA), 48(75.0%) were cured. Of the 100 patients with alopecia areata multiplex(AAM), 68 patients (68.0%), 12(50.0%) out of 24 patients with ophiasis, 5(55.6%) out of 9 with alopecia semi-totalis(AST), 3(50.0%) out of 6 patients with alopecia totalis(AT), 6(31.6%) out of 19 patients with alopecia universalis(AU) were cured. 4. Patients with the wider hair loss extent and with more severe type of alopecia areata required longer treatment period to cure, and the cure rate was lowered(p<0.05). 5. The shorter duration of the disease was related to the higher cure rate(p<0.05). If the treatment was started after six months of the duration, the cure rate was lowered. Therefore, beginning treatment within six months of the onset is recommended. 6. The period until terminal hair showed was 1.5 months for AA, 1.7 months for AAM, 1.6 months for ophiasis, 1.9 months for AST, 2.3 months for AT, 3.2 months for AU. 7. The treatment period to cure was 4.9 months for AA, 7.3 months for AAM, 7.7 months for ophiasis, 6.8 months for AST, 7.7 months for AT, 16.3 months for AU. 8. The major prognostic factors were extent and type of alopecia, duration of the disease and relapse. Conclusions : We analyzed the effectiveness of Korean medical treatment through cure rate according to the prognostic factors. This study will provide useful data for the treatment of alopecia areata.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.144-148
• /
• 1993

To increase the moisture content and thereby to reduce the static charge of polyacrylonitrile (PAN), thin layer surface photografting of acylamide (AAm) onto PAN fabrics by using benzophenone as a initiator with a mixtured solvent was carried. The effects of reaction conditions such as monomer, initiator concentrations, UV irradiation time and immersion time of fabrics on grafting were investigated. The percent grafting slightly increased with increasing monomer concentration, benzophenone concentration up to limiting value and thereafter decreased or level offed. The percent grafting was significantly increased with increasing irradiation and immersion times. The moisture regain increased with increasing the percent grafting. The static charge decreased with increasing the percent grafting.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1901-1902
• /
• 2008

얼굴 인식은 얼굴의 특징적인 패턴을 이용하지만, 이러한 패턴은 표정, 포즈, 조명의 변화에 민감하여 인식에 어려움이 있다. 본 논문은 표정 변화에 강인한 인식 모델을 개발하기 위해 Cohn-Kanade 표정 데이터베이스와 AAM을 이용하여 다양한 데이터를 추출하였고, 추출된 데이터를 다선형 분석을 이용하여 분석하였다. 이를 적용한 인식 실험에서 PCA보다 표정에 좀 더 강인한 인식 성능을 나타내었다.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.1
• /
• pp.33-38
• /
• 2011

This paper proposes the method of image cartooning, that makes cartoon-like images of a target, using reference images. We deform a target image using pre-defined reference images. For this deformation, we extract feature points from the target image by Active Appearance Model(AAM) and apply the warping method to the target using feature points of target and feature points of reference image as a basis of warping function. We create simplified cartoon-like images by abstraction of the deformed target image and drawing of edges and quantization of luminance of the abstracted image. Two main concept of cartoon(exaggeration and simplification) is inhered in this method when we use a exaggerated cartoon image as a reference image. It is possible for this method to create various results by control of warping and change of reference image.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.239-245
• /
• 2014

In this paper, a weighted value wrinkle detection method is suggested based on the analysis on the entire facial features such as face contour, face size, eyes and ears. Firstly, the main facial elements are detected with AAM method entirely from the input screen images. Such elements are mainly composed of shape-based and appearance methods. These are used for learning the facial model and for matching the face from new screen images based on the learned models. Secondly, the face and background are separated in the screen image. Four points with the biggest possibilities for wrinkling are selected from the face and high wrinkle weighted values are assigned to them. Finally, the wrinkles are detected by applying Canny edge algorithm for the interested points of weighted value. The suggested algorithm adopts various screen images for experiment. The experiments display the excellent results of face and wrinkle detection in the most of the screen images.