• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.122-126
• /
• 2006

This study investigated effect of arm posture, wrist motion repetition and external load on perceived discomfort through an experiment. Eleven female college students participated in the experiment, where shoulder, elbow and wrist motion, wrist motion repetition, and external load were used as independent variables. The results showed that only external load had a significant effect on perceived discomfort. The perceived discomfort linearly increased with external load. Based on the results of this and the previous study for males, it was concluded that effect of external load on perceived discomfort was larger than that of other posture and motion repetition related variables. This implies that effect of external load is the most important factor considered in the first place when assessing postural load.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.41-49
• /
• 1996

Effects of ambient geometry on the liftoff characteristics are experimentally studied for nonpremixed turbulent jet flames. To clarify the inconsistency of the nozzle diameter effect on the liftoff height, the ambiences of finite and infinite domains are studied. For nonpremixed turbulent jet issuing from a straight nozzle to infinite domain, flame liftoff height increases linearly with nozzle exit mean velocity and is independent of nozzle diameter. With the circular plate installed on the upstream of nozzle exit, flame liftoff height is lower with plate at jet exit than without, but flame liftoff characteristics are similar to the case of infinite domain. For the confined jet having axisymmetric wall boundary, the ratio of the liftoff height and nozzle diameter is proportional to the nozzle exit mean velocity demonstrating the effect of the nozzle diameter on the liftoff height. The liftoff height increases with decreasing outer axisymmetric wall diameter. At blowout conditions, the blowout velocity decreases with decreasing outer axisymmetric wall diameter and liftoff heights at blowout are approximately 50 times of nozzle diameter.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.23-25
• /
• 1998

Many of the currently used PN code acquisition algorithms detect the phase of the incoming PN signal on the basis of ML estimation principle and utilize statistics grounded in taking inner products. By showing that any set of 2n-1 PN sequences arising in SSRG or MSRG (those typically used in IS'95 implementations) configuration constitutes a linearly independent set and that the number of candidate PN sequences has to equal the dimension of the span of the candidate PN sequences, we prove that the lowerbounding computational complexity involved in any PN code acquistion, utilizing (only) inner product computations at each stage of acquisition, corresponds precisely to those, such as double dwell acquistion circuitries, currently used.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.8-15
• /
• 1965

Justifications for the use of ${\sigma}$ and Y as independent potential energy variables in the general equation have been reviewed and some mechanistic significances of the relationship discussed. Analysis of the activation parameters for the solvolysis of benzyl chlorides in ethanol-water mixture showed that there are two distinct series of substrate constants ${\alpha}'$, which can be correlated linearly within a series with the substituent constants ${\sigma}$ conforming to the generally accepted concept of change in mechanism from $S_N1$ to $S_N2$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.354-357
• /
• 2001

The developed method is proposed to identify rotor dynamic parameters. The method known imbalance vector, which renders over-determined linear system equation. The solution of the system equation can be obtained using least square method. The sensitivity analysis is performed to extract optimized solution, which is considered to be insensitive to inherent measurement errors. As an alternative approach to identify the parameters of bearings and rotor, adding a known imbalance to the rotor produces another equation set to make the system equations over-determined and linearly independent.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.6
• /
• pp.330-335
• /
• 1999

This paper proposed the p-q-r coordinate system where the instantaneous active power p, and the two instantaneous reactive powers qq, qr were defined. The three power components are linearly independent, so the compensation for the two instantaneous reactive powers leads to control the two components of the current space vector. With the theory, the neutral current of a three-phase four-wire system can be eliminated by only compensating the instantaneous reactive power using no energy storge element.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.1
• /
• pp.1-8
• /
• 1987

It is shown that irregular frequencies in the source and doublet distribution method, can be eliminated if the Green function associated with Kelvin's source of pulsating strength, is modified only in the region inside the body at the level of the undisturbed free surface. The system of the resulting Green integral equation is augmented without loss of the square-integrable property of its kernel so hat the discretisation yield N linearly independent equations for N unknown variables. From the solution, the potential and velocity at any point on the wetted surface of a surface-piercing body can be found using the properties of the double layer composed of the source and normal doublet distribution.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.11
• /
• pp.759-766
• /
• 2012

To estimate the cooling load for the following day, outdoor temperature and humidity are needed in hourly base. But the meteorological administration forecasts only maximum and minimum temperature. New methodology is proposed for predicting hourly outdoor temperature and humidity by using the forecasted maximum and minimum temperature. The correlations for normalized outdoor temperature and specific humidity has been derived from the weather data for five years at Seoul, Daejeon and Pusan. The correlations for normalized temperature are independent of date, while the correlations for specific humidity are linearly dependent on date. The predicted results show fairly good agreement with the measured data. The prediction program is also developed for hourly outdoor dry bulb temperature, specific humidity, dew point, relative humidity, enthalpy and specific volume.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.171-178
• /
• 2000

In this study, an indirect method to estimate the setup runout of a ball-end mill from cutting force signal is proposed. This runout makes cutting forces of each tooth of the milling cutter unequal. By transforming the cutting force model from time domain to frequency domain through time-convolution theorem, the magnitude and phase angle of runout can be explicitly expressed with material constants, cutting conditions, and force signal. The static setup runout can be obtained by extrapolating estimated effective runout, which is independent of feedrate but decreases linearly with increase in axial depth of cut. The setup runout estimated by slot cutting experiments, shows good agreement with the measured one.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.175-182
• /
• 2009

The stress-strain relationship of an unsaturated soil was analyzed by Bishop stress descriptions in this study. The failure criteria could be defined uniquely by the Bishop stress and were also independent of matric suctions. In the low level of matric suctions the failure criteria have a linear relationship and the estimated criterion fitted the measured accurately. Deformation moduli in the small strain level were linearly increased generally with respect to Bishop stress.