• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2317-2323
• /
• 2017

Recently, linear compressors of cooling systems such as refrigerators, which have a free piston driven by a linear motor, have attracted much attention because of their high efficiency. For structural reasons, linear compressors applied in refrigerators should use an AC capacitor to ensure stable control. However, AC capacitors are expensive and bulky. In this paper, we propose a new method to realize stable control without a real AC capacitor by implementing a virtual AC capacitor with software. To realize a virtual AC capacitor, a pure integral is calculated. Nonetheless, if an offset current exists, the calculation may diverge to infinity. To solve this problem, a high-pass filter is applied and the compensation for the phase angle and magnitude are realized with a new method. Finally, a virtual AC capacitor enables variable frequency operations. Hence, in case of a lack of voltage, we can compensate by running the linear compressor in high-frequency operations. To improve efficiency, we may optimize the operation frequency. The validity of a virtual AC capacitor has been verified through simulations and experimental results.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.53-56
• /
• 2000

그로벌최적화문제(Global optimization problem)의 부류인 다목적선형계획법 ( MOLP ) (Multiple objective linear programming)에서 결정된 유효해집합(a set of efficient solutions)위에서 선형함수 최적화문제 ( Ρ )는 해집합이 볼록집합이 아니므로(nonconvex set) 일반적인 선형계획법을 활용하기가 어렵다. 현재까지 ( Ρ )의 최적화를 위해서 유효해집합의 모든 꼭지점(extreme point)를 찾거나 일련의 선형계획문제들을 최적화하여 최적해를 찾는 접근방법들이 있다. 이러한 방법들에는 ( MOLP )의 해집합의 차원(dimension)이 커짐에 따라 문제해결이 실제적으로 가능하지 않는 경우가 많다. 본 연구는 주어진 선형함수와 다목적선형함수들간 관계를 고찰하여 선형목적함수를 구성하고 그 목적함수를 이용하여 주어진 문제 (Ρ) 의 최적해를 찾는 선형계획적 접근방법을 제안한다.

• 대한수학회지
• /
• 제46권3호
• /
• pp.643-656
• /
• 2009

The family of demi-linear mappings between topological vector spaces is a meaningful extension of the family of linear operators. We establish equicontinuity results for demi-linear mappings and develop the usual theory of distributions and the usual duality theory.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.450-453
• /
• 2001

Linear motor is characterized by its high velocity, high acceleration and good positioning accuracy. In recent years, linear motor is often used as a fast feed mechanism for high-speed machine tools. For the effective application of linear motors to machine tools, many demands on machine conceptions must be fulfilled. In this paper, some important construction concepts such as bending deformation of machine table, frictional force on the linear guidance and thermal behavior of linear motors are presented.

• Communications for Statistical Applications and Methods
• /
• 제10권1호
• /
• pp.125-134
• /
• 2003

Standard estimation methods for linear mixed models are sensitive to influential observations. However, tools and concepts for linear mixed model diagnostics are rudimentary until now and research is heavily demanded in linear mixed models. In this paper, we consider two diagnostics to evaluate the effects of individual observations in the estimation of fixed effects for linear mixed models. Those are Cook's distance and COVRATIO. Results of our limited simulation study suggest that the Cook's distance is not good statistical quantity in linear mixed models. Also calibration point for COVRATIO seems to be quite conservative.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권1호
• /
• pp.19-24
• /
• 2008

We propose a new miniature air-bearing stage with a moving-magnet slotless linear motor. This stage was developed to achieve the precise positioning required for submicron-level machining and miniaturization by introducing air bearings and a linear motor sufficient for mesoscale precision machine tools. The linear motor contained two permanent magnets and was designed to generate a preload force for the vertical air bearings and a thrust force for the stage movement. The characteristics of the air bearings, which used porous pads, were analyzed with numerical methods, and a magnetic circuit model was derived for the linear motor to calculate the required preload and thrust forces. A prototype of a single-axis miniature stage with dimensions of $120\;(W)\;{\times}\;120\;(L)\;{\times}\;50\;(H)\;mm$ was designed and fabricated, and its performance was examined, including its vertical stiffness, load capacity, thrust force, and positioning resolution.

• 센서학회지
• /
• 제30권6호
• /
• pp.420-428
• /
• 2021

In this study, linearized sweeping of a wavelength sweeping laser was realized. This technique was used to measure the strain on a fiber Bragg grating(FBG) sensor. For linear sweeping, PID control over the wavelength difference between linear and nonlinear sweeping was employed. The performance test showed that linear sweeping with a 46 nm range and a 1 kHz frequency held up well with a 99.5 % decrement in nonlinearity after the 120th feedback. When attached to a strain gage, the FBG sensor registered strain that matched the data sheet within a difference of 4.5[με]. Altogether, linear sweeping can play a leading role in monitoring a safety of large SOC structures as well as in other wavelength sweeping laser related fields.

• 한국통신학회논문지
• /
• 제32권10A호
• /
• pp.958-964
• /
• 2007

이 논문은 maximum a posteriori (MAP) 비트 검출(bit detection)의 비트 오류 확률 (bit error probability: BEP)과 비트 최소 평균 제곱 오류(bit minimum mean square error: bit MMSE)사이의 관계를 유도한다. BEP는 bit MMSE의 1/4 보다 크고 1/2보다 작음을 유도한다. 이 결론을 이용하면 bit-linear linear-dispersion (BLLD) 부호를 적용한 다중 입출력 (multiple-input multiple-output: MIMO) 통신 시스템에서 가우시안 채널의 mutual information의 미분 값의 하한과 상한을 BEP로부터 얻을 수 있고 나아가서 mutual information의 하한과 상한을 구할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.208-213
• /
• 1992

In this paper we are concerned with optimal control problems whose costs am quadratic and whose states are governed by linear delay equations and general boundary conditions. The basic new idea of this paper is to Introduce a new class of linear operators in such a way that the state equation subject to a starting function can be viewed as an inhomogeneous boundary value problem in the new linear operator equation. In this way we avoid the usual semigroup theory treatment to the problem and use only linear operator theory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.27-29
• /
• 2006

In this paper, we propose a new method of automatic white balance which is one of the image signal processing techniques. Our method is conceptually based on gray world assumption. However, while previous methods generate linear results as multiplying pixel values by a gain, our method generates non-linear results using the feature of B-Spline curves. The two merits of deriving non-linear results are preventing AWB failure from transforming strong color of high level into wrong color and well preserving original contrast of an input image.