• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.988-995
• /
• 2015

Gaps between the upper edges of brassiere mold cups and the breasts are one of the most serious issues in realizing comfort wearing of commercial brassieres for small-breasted women. The surplus ease amounts causing the fit problem were measured from 3D wearing images of the small-breasted women's brassieres. The effect after the removing the surplus ease amounts from the upper edge of mold cup was approved by subjective wearing evaluation. Since the volume distribution of mold cup can also affect the wearing sensation of brassiere, the subjective wearing sensation was compared for two brassieres of different volume distributions, V_L, of which volume was concentrated at the lower cup, and V_C, which has the thickest part at the nipple. As the results, the suitable sensation for cup volume and the natural wearing silhouette could be accomplished by removing the surplus ease amounts from the upper edge of mold cup to reduce the gaps between brassieres and the breasts, which could be accomplished through an approach reducing the volume near the upper edge of mold brassiere cup and making the volume concentrated at the lower cup. These works provide a useful information on the design of the brassiere mold cups for small-breasted women. Moreover, modeling methods of 3D scan data and 3D printing technique for making more accurate mold cases used in this research can be helpful to develop and evaluate clothing products in future.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.38-43
• /
• 2002

Characteristics of cell growth and heavymetal adsorption by recombinant Saccharomyus cerevisiae strains harboring multiple copies of the CUP1 gene encoding metallothione (MT) protein were studied in batch cultures. Recombinant S. cerevisiae strains harboring multiple copies of the CUP1 gene were superior to the host and wild-type yeast strains in terms of cell growth and heavy metal removal, indicating that the copy number of the CUP1 gene for MT expression played an important role in the adsorption of heavy metals. It was suggested that the CUP1 promoter for the MT expression is induced by manganese and zinc as well as copper An optimum copper concentration for MT expression and concomitant adsorption of heavy metals by recombinant S. cerevisiae was found to be 0.31 mM. A nonionic surfactant Triton X-100 enhanced cell growth by 17.7% and removal of zinc by 6.1% compared with the control case.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.549-559
• /
• 2012

The purpose of this study was to analyze the comfort of sports bras by style and bra cup size. The comfort of wear was measured with compression level. The displacement of breast points (BP) after wearing a sports bra was measured. Study subjects evaluated the comfort level of the compression type and encapsulation type sports bras after walking and running. The results showed that all types of experimental sports bras provided more coverage than everyday bras. The compression type bra placed more pressure on the breast, chest, and under-bust than the encapsulation type bra. The BP distance decreased for all types. The C cup subjects' breasts were raised after wearing the sports bras. The B cup subjects had less comfort with the compression style bra than C cup subjects. The racer back style bra with high neckline and small band girth placed more pressure than others. They were difficult to don and doff and the least comfortable. These results imply that the racer back compression style sports bra was uncomfortable for women with large breast, while the encapsulation style bra with the compressing panel at upper chest was the most comfortable. The bras that shortened BP distance placed more pressure on the breast. But the bra that raised and shorted the distance of BP provided better comfort for large-breasted subjects.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.109-119
• /
• 2008

The purpose of this study is to dvelop the basic pattern of wome which are fitting for 75A. The collected data were statistcally processed usig the SPSS 10.0 for Mans Standard Deiation, Cronbach's $\alpha$, etc. This study suggested a size chart for body measurement for constructing basic brssiere patterns with size of 75A. The construction of this experimental brassiere were lower cup, upper cup, front panel and wing and characterized by a round cup wired as well as a full cup embrcing the entire breasts. The drafting method for constructing basic brassiere patterns for 75A was completed by selecting a total of 11subjects, and two wearing tests were carried out with the subjects. the dimensions and shapes of the basic brassiere pattern suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Journal of Acupuncture Research
• /
• v.38 no.2
• /
• pp.159-164
• /
• 2021

Background: Cupping is widely used in Korean medicine, but there is a risk of bacterial infection if the suction pump (used for inducing negative pressure) and the patients' skin are not separated. This study aimed to investigate the effect of layer cupping by comparing the pressure changes between layer cupping and conventional cupping. Methods: To evaluate pressure changes the study was designed with 3 types of conditions applied to a skin model: (1) a Dongbang cup with a manual or motor suction pump (conventional cupping); (2) layer cupping with 2 Dongbang cups; and (3) layer cupping with a cup made by 3D printing and a Dongbang cup. Results: When a manual suction pump was used (conventional cupping), the pressure did not decrease steadily, and in 1 section there was an increase in pressure. When layer cupping was used, the pressure in the lower cup (which would be directly applied to the patient's skin), decreased steadily. Conclusion: In the pressure change graph for layer cupping in this skin model, the pressure in the lower cup (which would be placed on the patient's skin) steadily decreased, and reached equilibrium. Therefore, the layer cupping model may help to reduce the risks of bacterial infection.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.767-775
• /
• 1999

The purpose of this study is to investigate the visual sensibilities of brassiere design. Brassieres were divided into three types according to connection of a cup and a strp. In each type Lace was used where the part of the cup divided by Lines which were constructed such as a mold a horizontal a vertical a mixed and an oblique design. As a result 39 brassieres were obtained. The experiment has been done for seven groups which were divided by the type line and lace with 5 semantic differential bi-polar scales and 10 specialists. The data was analyzed using the statistical SPSS package. The major findings of this research were as follows. An oblique design line in the brassiere were effective in making the breast look bigger more buxom and more voluminous. To make the breast look small and unvoluminous the use of a mold in the 1/2 cup brassiere was effective. Also a mold using lace ion the 1/2 cup brassiere had an effect in making the breast look flatter and broader.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.197-199
• /
• 2002

This paper describes the effects of chip arrangement configurations and the dimension of a reflecting cup upon the light output characteristics of a white lamp composed of RGB LED chips. As a result of simulation, the shorter distance between adjacent chips leads to a relative decrease in the light output efficiency due to inter-chip absorption of quanta, but rather uniform color mixing is expected. Among the factors of designing a reflecting cup it is the tilt angle of the cup wall that plays a determining role upon the variation of the light distribution. The light distribution shows a sudden change of pattern from Lambertian to Batwing at about $35^{\circ}{\sim}40^{\circ}$ of tilt angle in case of a silver-coated wall cup.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.5
• /
• pp.29-33
• /
• 2001

This paper summarizes the design and construction of the roof canopy structure for the SEOUL 2002 World Cup Main Stadium with a design inspired by Korean traditional beauty emphasizing images of the Pangpae kite. The stadium has also been designed for maximization of its post-World Cup utility to be used on as every basis by the citizens. The stadium canopy is a unique spatial network of truss members with a tensile membrane roof suspended from 16 masts. The canopy covers 40,950 ㎡. which is clad with a pre-stressed tensile membrane of PTFE coated fiberglass fabric and the glass.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.45-48
• /
• 1999

A program for initial blank design in sheet forming which contains the capabilities of forward loading simulation by the finite element method and backward tracking simulation has been developed and proved the effectiveness by applying to a square cup stamping process. In the blank design of square cup stamping the backward tracing program can produce an optimum blank configuration which forms a sound net-shape cup produce without machining after forming. Another general application appears in the blank design of a cup stamping with protruding flanges one of typical automobile components. The blank configurations derived by backward tracing simulation have been confirmed by a series of loading simulations. The approach for decision of an initial blank configuration presented in this study will be a milestone in fields of sheet forming process design.