• Journal of Plant Biology
• /
• 제38권2호
• /
• pp.165-171
• /
• 1995

Plants of G. furcata were divided into four variant populations. The habit characteristics, external and internal morphology were analysed quantitatively in order to clarify their morphological variation. Among four variant populations, type I(typical G. furcata type) and type II(G. furcata f. intricata type) may be influenced by the time when the develop from the crustose basal discs and the tidal level. Type III is the immature plants, and type IV (G. furcata f. coliformis type) is a G. furcata population in late spring after the luxuriant season. For the reason, the formas of G. furcata f. intricata and f. coliformis are no more valid in Gloiopeltis furcata.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.52-59
• /
• 1997

An experimental study is presented for the characteristics of the high temperature superconductor as an application of the repulsive type magnetic bearing. A ring shaped YBCO type superconductor and Neodium permanent magnets are employed for the experiment. For the case of field cooling, superconductor shows strong repulsive force, which is due to the Meissner effect, as the gap between the superconductor and the magnet gets closer. The repulsive force variation with respect to the gap change shows hysterisis characteristics. The area of the loop of the hysterisis curve represents the dissipation of energy, which reveals that the magnetic bearing with superconductor has large damping. The effect of the initial gap and the magnetic flux density on the repulsive force is analyzed experimentally and the static stiffness variation is calculated from the measured repulsive force variation. The relative sliding velocity between the superconductor and the magnet has little effect on the repulsive force which is quite different from the usual sliding element bearing. As the initial gap for the field cooling becomes larger, the maximum repulsive force at the minimum gap increases and approaches to the value for the case of zero field cooling.

• 음성과학
• /
• 제11권3호
• /
• pp.23-36
• /
• 2004

Many languages show reverse durational variation between preceding vowel and following voiced/voiceless (lax/tense) consonants. This study investigated the likely effects of phoneme type (tense vs. lax) on the timing structure (duration of syllable, word, phrase and sentence) of Korean. Three rates of speech (fast, normal, slow) applied to stimuli with the target word /a-Ca/ where /C/ is one of /p, p', $p^h$/. The type (tense/lax) of /C/ caused marked inverse durational variations in the two syllables /a/ and /Ca/ and highly different durational ratios between them. Words with /p', $p^h$/ were significantly longer than that with /p/, which contrasts with many other languages where such pairs of words have a similar duration. The differentials between words remained up to the phrase and sentence level, but in general the higher linguistic units did not statistically differ within each level. Thus, the phrase is suggested as a compensatory unit of phoneme type effects in Korean. Different rates did not affect the general tendency. Distribution of time variations (from normal to fast and slow) to each syllable (/a/ and /Ca/) was also observed.

• 교육시설 논문지
• /
• 제21권3호
• /
• pp.11-18
• /
• 2014

This study was carried out to observe movement behavior of students about a change of physical condition in moving space of variation type using simulation technique. The moving pattern of students was checked by SIMULEX program. The width of corridor was adjusted to 2.4m, 3.0m and 3.9m and a flow coefficient of simulation was estimated with the change of width. The wider the width of corridor was, the lower a flow coefficient was, and the difference was large when the width of corridor was narrow. It was also observed that the flow coefficient was relatively high in all types of corridor setup individual locker. Unit occupation area with the change of width was additionally measured, as shown in the results, the occupation density was low when the width of corridor was wide and a stationary time was short.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.58-68
• /
• 2000

본 논문에서는 다대식 가열로내의 산소 농도 변화를 표현하는 모델이 제안되었다. 설계된 모델은 크게 '잔류 가스에 대한 모델'과 '산소에 대한 모델'의 두가지로 구성되었다. 각각의 모델은 산소농의 변동에 관여하는 네가지 요인들올 화학, 유체 이론적 관계식과 퍼지 이론을 이용하여 설계되었다. 고려된 네가지 요인들은 버너에서 의 연소반응, 연소대간의 유체 이동, 가열로 내부로부터 외부로의 유체 흐름 및 출입구를 통한 외부 공기의 유입 등이다. 모의 실헝 결과블 통해 제안된 모델로 계산된 각 연소대내의 산소 농도 변화가 설제 조업시 발생하는 유형과 유시함을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권3호
• /
• pp.31-44
• /
• 1987

Nowadays, the problems of energy and environmental pollution become serious day by day and the diesel engine, which has been proved to be superior to gasoline engine with respect to fuel consumption and ecological problems of exhaust gas, has been adopted widely for various purposes from the marine diesel engine and the dynamo engine to all kinds of engine on land. Therefore, extensive parametric studies on combustion of diesel engine should be done for its desing and improvement. To predict the behavior of diesel engien according to variable operating conditions by means of cycle simulation, the reasonable pattern of heat release rate has to be asumed. But it is necessary to know the actual variation of heat release rate in order to assume the reasonable pattern of heat release rate according to the actual operating conditions. In this paper, on a high speed small bore diesel engine with pre-combustion chamber, experimental investigations were carried out to determine the relationship between the heat release pattern and parameters such as engine load and speed. And also, the theoretical investigations about the performance variations of the above diesel engine according to the predicted pattern of heat release rate variation were performed. From the above observations, it may be said that the Fanboro indicator, which was used to get the cylinder pressure, can be used to estimate a reasonable pattern of heat release rate and it is confirmed that the pattern of heat release rate for the pre-combustion type engine is different from that of the direct injection type engine.

• 교육시설 논문지
• /
• 제20권5호
• /
• pp.11-18
• /
• 2013

This study has revisited the definition and characteristics of BIM to contribute to the better understanding of this concept. For the successful application of BIM in architectural design field, it should start with public buildings like schools which can be standardized. Since a number of conditions of school design appear to suit the schematic design phase for BIM application more than do other types of building design, the viability of BIM was examined by applying parametric modeling(one of BIM's basic characteristics) to mass study in schematic design phase for the configuration of schools that adopt the variation type of subject classroom design of the $7^{th}$ National Educational Curriculum. In addition, this modeling technique was used with software of Rhino 3D and Grasshopper, which will have a linkage to environmental analysis in near future. Finally, it can be expected that the work efficiency will be maximized if BIM is going to be applied in the early design stage instead of the end stage.

• 산업공학
• /
• 제16권3호
• /
• pp.344-351
• /
• 2003

Critical dimension is one of the most important characteristics of up-to-date integrated circuit devices. Hence, critical dimension control in a semiconductor wafer fabrication process is inevitable in order to achieve optimum device yield as well as electrically specified functions. Currently, in complex semiconductor wafer fabrication processes, statistical methodologies such as Shewhart-type control charts become crucial tools for practitioners. Meanwhile, given a critical dimension sampling plan, the analysis of variance technique can be more effective to investigating critical dimension variation, especially for on-chip and on-wafer variation. In this paper, relating to a typical sampling plan, linear statistical models are presented for the analysis of critical dimension variation. A case study is illustrated regarding a semiconductor wafer fabrication process.

• 대한전기학회논문지
• /
• 제44권1호
• /
• pp.97-103
• /
• 1995

This paper reports the following two topics : $\circled1$ ozone concentration (O$\sub$3con/) and discharge characteristics in flowing O$\sub$2/ with variation of Re$\sub$3/ at high voltage nozzle (HVN) of HVN 10 type ozonizer. $\circled2$ O$\sub$3con/ with variation of Re$\sub$3/ at HVN of HVN 25 type ozonizer. The important conclusions obtained from this paper are as follows. 1) In HVN 10 type ozonizer : $\circled1$ The discharge pattern can be controlled by adjustment of the Re$\sub$3/. $\circled2$ V$\sub$c/ is inversely proportional to pulse width (P$\sub$w/) and pulse frequency (P$\sub$f) $\circled3$ O$\sub$3con/ increase as decreasing of Re$\sub$3/ for constant P$\sub$w/ and P$\sub$f/. $\circled4$ O$\sub$3con/ increase as decreasing of P$\sub$w/, O$\sub$3con/ is proportional to P$\sub$f/. 2) In HVN 25 type ozonizer : O$\sub$3con/ of HVN 25 type ozonizer can increase than that of HVN 10 type ozonizer, according to parallel circuit of applied voltage and serial of supplied gas. As a result, we can obtain O$\sub$3con/ of 825[ppm] as the maximun value.

• 교육시설 논문지
• /
• 제23권6호
• /
• pp.19-26
• /
• 2016

In this study, moving awareness of students having different physical conditions in homebase and attitudes of students to spacial use in user's aspect were analyzed. As shown in the results, the dissatisfaction degree of the second grade using homebase type was higher than the first and the third grades using exclusive space for a class, homeroom type. The necessity of exclusive space for a class was highly shown in the second grade students. Students of the first and the third grades showed similar pattern in using frequency of homeroom. The results showed that behavior pattern of students was different with their physical conditions. Especially, factors showing obvious differences between the two groups were possession awareness of their belongings, tendency to route choice of high frequency, stay awareness of main stay in time to rest and point of time using restroom. These results will be useful to design various models in variation type of schools.