• 한국지능시스템학회논문지
• /
• 제9권6호
• /
• pp.577-582
• /
• 1999

Using a sole input variable simplifies the design process for the fuzzy logic controller(FLC). This is called single-input fuzzy logic controller(SFLC). However it is still deficient in the capability of adapting to the varying operating conditions. We here design a single-input adaptive fuzzy logic controller(AFLC) using a switching function of the sliding mode control. The AFLC can directly incorporate linguistic fuzzy control rules into the controller. Hence some parameters of the membership functions characterizing the linguistic terms of the fuzzy rules can be adjusted by an adaptive law. In the proposed AFLC center values of fuzzy sets are directly adjusted by a fuzzy logic system. We prove that 1) its closed-loop system is globally stable in the sense that all signals involved are bounded and 2)its tracking error converges to zero asymptotically. We perform computer simulation using a nonlinear plant.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.408-418
• /
• 1998

This paper presents the implementation of comparator which is self-testing with respect to the faults caused by any single physical defect likely to occur in NMOS and CMOS integrated circuit. The goal is to use it for the fault-tolerant system. First, a new fault model for PLA(Programmable Logic Array) is presented. This model reflects several physical defects in VLSI circuits. It focuses on the designs based on PLA because VLSI chips are far too complex to allow detailed analysis of all the possible physical defects that can occur and of the effects on the operation of the circuit. Second, this paper shows that these design, which has been implemented with 2 level AND-ORor NOR-NOR circuit, are optimal in term of size. And it also presents a formal proof that a comparator implemented using NOR-NOR PLA, based on these design, is sol f-testing with respect to most single faults in the presented fault model. Finally, it discusses the application of the self-testing comparator as a building block for the implementation of the fault-tolerant system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.44-49
• /
• 2001

For minimum phase systems, the conventional fuzzy logic controllers (FLCs) use the error and the change-of-error as fuzzy input variables. Then the control rule table is a skew symmetric type, that is, it has UNLP (Upper Negative and Lower Positive) or UPLN property. This property allowed to design a single-input FLC (SFLC) that has many advantages. But its control parameters are not automatically adjusted to the situation of the controlled plant. That is, the adaptability is still deficient. We here design a single-input direct adaptive FLC (SDAFLC). In the AFLC, some parameters of the membership functions characterizing the linguistic terms of the fuzzy rules are adjusted by an adaptive law. The SDAFLC is designed by a stable error dynamics. We prove that its closed-loop system is globally stable in the sense that all signals involved are bounded and its tracking error converges to zero asymptotically. We perform computer simulations using a nonlinear plant and compare the control performance between the SFLC and the SDAFLC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.651-656
• /
• 1991

A mixed $H_2/H{\infty}$ design methodology is proposed for a single-input-single-output system. The reciprocal stability margin(RSM) function is defined for the perturbed plant with additive uncertainties. A suboptimal $H_2$ controller is sought to minimize the RSM function.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.136-144
• /
• 2004

In general a hydraulic system which uses a single rod hydraulic as an actuator is modeled as a nonlinear system and reveals uncertain Parameter characteristics such as the density variation of hydraulic oil and is subject to load variations and severe disturbances during operation. A variable design-parameter fuzzy PID controller is adopted to solve these undesirable internal and external problems and its effectiveness is verified through computer simulations for control performance and real time control possibility.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.557-560
• /
• 2005

This paper considers a global asymptotic output tracking problem with a prescribed constant reference signal for a class of single-input and single output-output nonlinear systems. It is shown that under some mild conditions on such a system there is a smooth output feedback achieving global asymptotic output tracking and such a smooth output controller is explicitly constructed by a new design method proposed. The usefulness of our result is illustrated by a numerical example.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1004-1013
• /
• 2002

A multirate state feedback control (MRSFC) method is proposed for systems sensitive to disturbance and noise based on the multirate estimator design using current estimator. MRSFC updates the controller output slower than the measurement sampling fiequency of system output by a lifting factor $R=T_c/T_s$ The closed-loop MRSFC system is less sensitive to disturbance and noise due to filtering effect than the conventional single-rate control system The multirate estimator gain can be obtained by solving a conventional pole placement problem such that MRSFC has the same spectrum of eigenvalues in the s-plane as the single-rate control. We applied the proposed multirate state feedback controller to a galvanometer servo system Simulation and experimental results show that settling and tracking performances are improved compared with a conventional single-rate pole placement control (PPC).

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.654-663
• /
• 2012

In this paper, a digital control strategy based on equivalent fundamental and odd harmonic resonators is proposed for single-phase DVRs. By using a delay block, which can be equivalent to a bank of resonators, it rejects the fundamental and odd harmonic disturbances effectively. The structure of the single closed-loop control system consists of a delay block, a proportional gain and a set of zero phase notch filters. The principle of the controller design is discussed in detail to ensure the stability of the system. Both the supply voltage and the load current feedforwards are used to improve the response speed and the ability to eliminate disturbances. The proposed controller is simple in terms of its structure and implementation. It has good performances in harmonic compensation and dynamic response. Experimental results from a 2kW DVR prototype confirm the validity of the design procedure and the effectiveness of the control strategy.

• 한국소음진동공학회논문집
• /
• 제13권12호
• /
• pp.965-971
• /
• 2003

고밀도, 고정밀의 정보저장기를 실현하기 위해서 높은 서보대역이 요구되고 있다 이러한 요구조건을 만족시키기 위해서 이단구동시스템이 도입되었다. 이 시스템은 기존의 VCM을 조동구동기로, 추가적인 밀리엑츄에이터를 미동구동기로 사용하는 것이다. 이를 위해 우리는 압전형 밀리엑츄에이터를 서스펜션 부에 설계하였다 이러한 시스템의 제어를 위하여 PQ 제어 방법을 도입하였으며, 이 방식은 이중입력/단일출력 시스템을 두개의 단일 입출력 시스템으로 단순화시키는 것이다. 이 논문은 PQ 제어 방식을 적용시켜 설계하고. 설계된 제어기의 성능 평가로써 기존의 HDD의 PES을 받아서 외란제어 능력을 평가하는 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.554-559
• /
• 1986

This paper considers the problem of stabilizing a composite system formed by interconnecting a number of single-input single-output linear continuous systems. The problem is general in the sense that in addition to the standard assumption about the uncertainty of the subsystems, the strength of interconnections is assumed unknown. A method to design a local adaptive feedback control is first presented, and then the resultant closed-loop system is assured to be globally stable. Also, a numerical example is illustrated via computer simulation.