• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2001

Due to the friction characteristics of cylinders and the rail of a passenger car, in the elevator actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. To overcome the drawbacks, in this paper, we first try a hybrid controller which switches between a fuzzy logic controller and a PID controller. However, because the hybrid control scheme uses only a single type controller, except the switched layer, the high control performance can not be achieved. To solve this problem, we propose a new type fuzzy hybrid control scheme, which outputs of the output mixer arc controlled by a fuzzy logic. The hydraulic elevator system controlled by inverters has more then one switched layers due to the highly nonlinear characteristics. The proposed fuzzy hybrid control scheme achieves improved control performances by using both controllers with weighted outputs depend on the system status, to achieve improved control performances. The effectiveness of the proposed control scheme arc shown by simulation results, which the proposed fuzzy hybrid control method yields good control performance not only in the zero crossing speed region but also in the overall control region including steady-state region.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2
• /
• pp.103-110
• /
• 2005

Providing adequate amount of spatial impression for spaciousness) has been known to be one of the most important design considerations for the good acoustics of rooms for music. and the measurement, of room acoustics using parameters. such as LEF and IACC, forms an essential part of such evaluation. However. it is unavoidable to use different transducers (figure of eight microphones. head and torso) for the measurement of each parameter and it tends to make the measurement procedure complicated. The Present work tried to provide a simpler way to measure these binaural room acoustic parameters including monaural ones with a single measurement system using both spatial information collected through a 5-channel microphone and a trained neural network. A computer simulation program, CATT-Acoustic V7.2. which allowed us to obtain exactly the same spatial information as a 5-channel microphone was used. since it requires quite a large amount of data for practical training of a neural network. Since each reflection has different energy. delay and direction, energy should be integrated properly. the concept of ray tracing method was applied inversely in this work. Also applying weightings according to the delay times was considered in this work. Finally, predicted results were compared with the measured data md their correlations were analyzed and discussed.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1235-1244
• /
• 2010

Most emerging smart phones support capacitive touch sensors. It renders existing gesture-based interfaces not suitable since they were developed for the resistive touch sensors and pen-based input. Unlike the flick gestures from the existing gesture interfaces, the finger flick gesture used in this paper reduces the workload about half by selecting the target and the command to perform on the target at a single touch input. With the combination with multi-touch interface, it supports various menu commands without having to learn complex gestures, and is suitable for the touch-based devices hence it minimizes input error. This research designs and implements the multi-touch and flick interface to provide an effective file management system on the smart phones with capacitive touch input. The evaluation proves that the suggested interface is superior to the existing methods on the capacitive touch input devices.

• Earthquakes and Structures
• /
• v.7 no.6
• /
• pp.955-967
• /
• 2014

Storage racks are used worldwide in industries and commercial outlets due to the advantage of lighter, faster erection and easy alteration of pallet level as required. The studies to understand the behaviour of cold formed steel pallet racks, under seismic action is one of the emerging area of research. The rack consists of perforated uprights and beams with hook-in end connector, which enables the floor height adjustments. The dynamic characteristics of these racks are not well established. This paper presents the dynamic characteristics of 3-D single bay two storey pallet rack system with hook-in end connectors, which is tested on shake table. The sweep sine test and El Centro earthquake acceleration is used to evaluate the seismic performance of the cold formed steel pallet racks. Also an attempt is made to evaluate the realistic dynamic characteristics by using STAAD Pro software. Modal analysis is performed by incorporating the effective moment of inertia of the upright, which considers the effect of presence of perforations and rotational stiffness of the beam-to-upright connection to determine the realistic fundamental frequency of pallet racks, which is required for carrying out the seismic design. Finite element model of the perforated upright section has been developed as a cantilever beam through which effective moment of inertia is evaluated. The stiffness of the hook-in connector is taken from the previous study by Prabha et al. (2010). The results from modal analysis are in good agreement with the respective experimental results.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.4
• /
• pp.215-222
• /
• 1991

The absorption characteristics of itraconazole, which is an antifungal agent, from intestinal segments in the anesthetized rat i1l situ were investigated in order to design an effective oral drug delivery system. The pH-solubility profile of itraconazole, the rate and extent of absorption of itraconazole, the optimal absorption site(s) of itraconazole and the absorption enhancing effect of sodium cholate on itraconazole were examined in the present study. In situ single-pass perfusion method and recirculating perfusion technique using duodenum(D), jejunum(J) and ileum(I) were employed for the calculation of apparent permeability(Pe) and apparent first-order rate constant(Kobs). respectively. The results of this study were as follows; (1) Itraconazole showed appreciable aqueous solubility only at pH values of below 2.0. (2) pe(cm/sec) decreased in the following order: $D(10.24{\pm}1.78{\times}10^{-4})>J(8.86{\pm}0.79{\times}10^{-4})>I(3.78{\pm}0.13 X 10^{-4})$. (3) $Kobs(min^{-1})$ decreased in the following order: $J(17.12{\pm}3.19{\times}10^{-3})>D(13.37{\pm}0.6{\times}10^{-3})>I(11.05{\pm}0.91{\times}10^{-3})$. (4) The solubility of itraconazole markedly increased with the increase of the concentration of sodium cholate. (5) The addition of 10 mM sodium cholate significantly increased the apparent first-order rate constant of itraconazole in the ileum by a factor of 6.8.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1340-1350
• /
• 2009

The design and implementation of planar Active Phased Array Antenna System are described in this paper. This Antenna system operates at X-band with its bandwidth 10 % and dual polarization is realized using dual slot feeding microstrip patch antenna and SPDT(Single Pole Double Through) switch. Array Structure is $16\times16$ triangular lattice structure and each array is composed of TR(Transmit & Receive) module with more than 40 dBm power. Each TR module includes digital attenuator and phase shifter so that antenna beam can be electronically steered over a scan angle$({\pm}60^{\circ})$. Measurement of antenna pattern is conducted using a near field chamber and the results coincide with the expected beam pattern. From these results, it can be convinced that this antenna can be used with control of beam steering and beam shaping.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2016

Currently Korean government is rushing the new electronic government system introduced as 'platform e-government' with big data and cloud computing technologies and systems, ultimately intending to provide the public institution services customized from the integrated counter or window for the heterogeneous resident services. In this regard, this study suggested how to design the new metadata information system in which mutual integration of information systems can take place, where heterogeneous services can be shared efficiently at the application and data unit, as a separate application that can provide a single one- stop service for residents' petition at the integrated level in the back-office based on the public data in possession of each of government ministries and related organizations. If this proposed system is implemented, the achievement of customized public service can be advanced one step forward in processing the petitions of the residents by organically connected link between 'Demand Chain' and 'Supply Chain' in the integrated window. In other words, it could be made possible through the unification of both the 'Supply Chain' performed in the office space of the officials at the back-office level and the 'Demand Chain' performed in the living space of the residents at the front-office level.

• Journal of Digital Contents Society
• /
• v.17 no.1
• /
• pp.23-31
• /
• 2016

This study aims to develop a stereoscopic image authoring tool to effectively produce e-Book content that enhances user's sense of immersion in 3D environments. The proposed authoring tool consists of three core systems; 3D object editing, stereoscopic image, and image media production systems. First, the object editing system arranges and produces diverse objects that constitute virtual 3D spaces to fit the purpose of the content. In this case, commercial graphic authoring tools are utilized to design efficient data structures that can include produced external models. In addition, the material and textures of objects are made to be revisable and editable into the form wanted by the user. Thereafter, a stereoscopic image system will be implemented to produce the generated virtual scenes into stereoscopic images. This study uses the Anaglyph method so that the user can implement and use stereoscopic image scenes more easily. This method include functions to change the color of stereo cameras and control depth scaling. Finally, an image media production system will be implemented that will enable producing the produced stereoscopic images into single images or videos so that they can be effectively utilized in e-Book content.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.183-183
• /
• 2017

In the early part of rice growth, root volume primarily limits the amount of plant-accessible nitrogen (N). Therefore, knowledge of the root development is important for modeling N uptake of rice. The timing when the volume of rhizosphere cover the whole soil is also important to carry out timely top dressing. However, information about initial root expansion and associated N uptake is limited due to intrinsic technical difficulties in assessing below-ground processes. Some studies, however, showed a close relationship between below-ground root and above-ground leaf development, suggesting a possibility that above-ground attributes could serve as surrogates for the root processes. In this study, we investigated the relationship between below-ground and above-ground development of rice. Field experiments were conducted where we cultivated Koshihikari (a leading cultivar in Japan) for four different cropping schedules in 2012. In 2016, Gimbozu (HEG4) and three flowering time mutant lines of Gimbozu (X61 (se13), HS276 (ef7), DMG9 (se13, ef7)) were examined for a single season. Experiments were performed with three replications in a completely randomized design. We monitored ammonium-N concentration ([NH4+-N]) in soil solution by repeatedly taking samples from a porous tubing (10-cm long) vertically inserted at the most distant point from surrounding rice hills. Samples were taken in triplicate (= triplicate tubes) and every three days from transplanting in each experimental unit. For above-ground attributes, leaf area index (LAI) was measured in 2012, whereas soil coverage ratio was estimated by image processing in 2016. Results showed that [NH4+-N] increased gradually after transplanting and then rapidly decreased from a certain day. This distinct drop in [NH4+-N] informed us the timing at which the rice root system reached the point of porous tubing and thus essentially covered the whole soil volume. The LAI at the dropping point was about 0.43 regardless of the cropping schedules in 2012 experiment. In 2016, the coverage ratio at the N dropping point was within the range of 0.12 to 0.19 for four genotypes having different growth durations. In addition, the coverage ratios at seven weeks after the transplanting showed a good correspondence to LAI across the four genotypes. We therefore conclude that both LAI and coverage ratio may serve as robust indicators for root development and might be useful to estimate the timing when the root system fully cover the soil volume. Results obtained here will also contribute to develop models that can predict not only above-ground canopy development but also associated below-ground processes.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3633-3650
• /
• 2000

Internet is no longer a network for special communities but became a global means of communication infrastructure for everyday life. People are exchanging their personal messages using e-mails, students are getting their educational aids through the web, people are buying a variety of goods from cyber shopping malls, and companies are conducting their businesses over the Internet. Recently, such an explosive growth of the traffic in the Internet raised a big concern on how to accommodate ever-changing user's needs in terms of an amount of the traffic, characteristics of the traffic, and various service quality requirements, Over provisioning can be a simple solution but it is too expensive and inefficient. Thus many new technologies to solve this very difficult puzzle have bcen introduced recently, Any single solution, however, can be insufficient and a carefully designed architecture, which integrates a group of solutions, is required. In this paper, we propose a policy-based Internet QoS provisioning, traffic engineering and perfonnance management system as our solution to this problem. Our integrated management QoS solution can provide highly responsive flow-through service provisioning, more realistic service and resource policy control based on the real network performance information, and centralized control of traffic engineering for heterogeneous networks.