• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.1-14
• /
• 2010

Bio-ethanol is a promising alternative energy source for reducing both consumption of crude oil and environmental pollution from renewable resources like lignocellulosic biomass such as wood, forest residuals, agricultural leftovers and urban wastes. Based on current technologies, the cost of ethanol production from lignocellulosic materials is relatively high, and the main challenges are the low yield and high cost of the hydrolysis process. Development of more efficient pretreatment technology (physical, chemical, physico-chemical, and biological pretreatment), integration of several microbiological conversions into fewer reactors, and increasing ethanol production capacity may decrease specific investment for ethanol producing plants. The purpose of pretreatment of lignocellulosic material is to improve the accessible surface area of cellulose for hydrolytic enzymes and enhance the conversion of cellulose to glucose and finally high yield ethanol production which is economic and environmental friendly.

• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.455-463
• /
• 2021

This study investigated the biomass content of fluff type SRF(Solid refuse fuel) operated in B city according to the physical composition. As a result of analyzing the physical composition of SRF, it was investigated that papers 25.2%, fiber 15.1%, vinyl·plastics 42.6%, woods 9.4%, rubbers 1.5%, diapers 3.2% and incombustibles 3.0%. The average of ash and combustible content of SRF was 10.5% and 89.5%, and the higher the proportion of paper and wood, the lower proportion of ash. In addition, the biomass of SRF is 24.9%~58.0%, with an average of 42.6%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.156-161
• /
• 2012

Marine biomass is considered an important substrate for anaerobic digestion to recovery energy i.e. methane. Nevertheless, marine biomass has attracted little attention by researchers compared to terrestrial feedstock for anaerobic digestion. In this study, biochemical methane potential (BMP) test was used to evaluate generation of renewable energy from starfish. A cumulative biogas yield of $748{\pm}67mL\;g^{-1}VS^{-1}$ was obtained after 60 days of digestion. The cumulative methane yield of $486{\pm}28mL\;CH_4\;g^{-1}VS^{-1}$ was obtained after 60 days of digestion. The methane content of the biogas was approximately 70%. The calculated data applying the modified Gompertz equation for the cumulative $CH_4$ production showed good correlation with the experimental result obtained from this batch study. Since the result obtained from this study is comparable to results with other substrates, marine biomass can be co-digested with food waste or swine wastewater to produce $CH_4$ gas that will help to reduce the gap in global energy demand.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.273-283
• /
• 1999

When microorganism is injected into porous medium such as soils, biomass is retained in the pore. Soil pore size and shape are varied from the initial condition as a result of biofilm formation which makes hydraulic conductivity reduced and friction rate between soil aggregates increased. In this research, hydraulic conductivity reduction was measured after microorganism are inoculated and cultured with synthetic substrate and nutrient. In addition, this research evaluated the applicability of biomass-soil mixture to the field condition as an alternative cover material in landfill by measuring hydraulic conductivity change after repetitive freeze-thaw cycles. Hydraulic conductivity of silty soil decreased by approximately 1/50 after biomass inoculation and cultivation. Biofilm attached on soil aggregates is resistant to acidic or basic condition. After repetitive freeze-thaw cycles, however, hydraulic conductivity increase implies that biomass clogging can be impaired.

• Journal of Aquaculture
• /
• v.8 no.4
• /
• pp.285-294
• /
• 1995

In Bouin polder, one of the oyster culture zone on landbase in France, artificial substrate was suspended every week to study the variation of the biomass of benthic microalgae as the chlorophyll a. The meteorological and physico-chemical factors in sea water were studied by analysing the correlationship, correlation circle and principal component of these factors. Among the meteorological factors such as insolation, precipitation and wind, insolation was one of the most prominant factors associated with the increase of water temperature, salinity, pH and biomass but with the decrease of turbidity, dissolved oxygen and nitrate. Nitrate was the main contributor for the variation of biomass among the other nutrient components, while phosphate and silicate increased in summer when the biomass increased.

• Korean System Dynamics Review
• /
• v.16 no.1
• /
• pp.25-51
• /
• 2015

The purpose of this paper is to analyze nutrients dynamics depending on biomass of Menyanthes trifoliata L., the endangered species, in a small closed-type wetland. In order to understand dynamics between Menyanthes trifoliata L. and eutrophication, causal loops and stock-flow diagram were constructed. The result of the model simulation was matched well with monitoring data (Menyanthes trifoliata L. biomass, TN, TP, DO). The model was simulated with 3 scenarios. In case of scenario 1, the initial value of biomass was 0mg/L, and the eutrophic state period was 77 days. In case of scenario 2, the initial value of biomass was 35.8 mg/L, and the eutrophic state lasted for 13 days. In case of scenario 3, the initial value of biomass was 71.6 mg/L, and the eutrophic state was nonexistent. The scenario 3 was selected as planting plan of Menyanthes trifoliata L. Through this study, planting design with an endangered plant was developed to control eutrophication in small closed-type wetland.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.5
• /
• pp.1037-1043
• /
• 2014

We extensively observed macroalgal assemblages of species composition and biomass of summer benthic marine algae at Dokdo in the East sea of Korea. A total of 102 species (12 Chlorophyta, 36 Phaeophyta, and 54 Rhodophyta) were identified in quadrats and were analysed qualitatively to define the variation patterns. Biomass in dry weight according to various depths ranged between 146.0 to 764.2 g m-2 at study sites. Mean biomass at the investigated sites was greater in the 10m depth range than in the 5 and 15m depths at Dongdo. The flora could be classified into six functional groups: coarsely branched form (51.0%), filamentous form (17.7%), thick leather form (15.7%), sheet form (5.9%), jointed calcareous form (4.9%) and crustose form (4.9%). The R/P, C/P and (R+C)/P value were 1.67, 0.50 and 2.17, respectively. The number of marine algae species and the biomass in Dokdo area were markedly reduced as compared with those in the previous studies. This result suggests possible future changes in the algal vegetation, considering coastal marine environment of this area.

• Journal of Environmental Science International
• /
• v.29 no.2
• /
• pp.155-166
• /
• 2020

This study was conducted to analyze the current situation of the logging operation system and to suggest an effective policy plan to secure important raw materials for the use of forest biomass. The dissemination of forestry mechanization and the establishment of the logging operation are important tasks to establish a system and reduce costs of timber production by increasing the use of forest biomass; this includes increasing the supply of timber for domestic products and increasing the production of wood chips and wood pellets. In particular, the efficiency of steep-slopes catenary system machinery for yarding such as tower-yarder and swing-yarder should be urgently supplied to cope with forest production and supply of forest biomass energy resources. In addition, it is necessary to continuously promote the dissemination of high-performance forestry machinery as is being done in Japan. At the same time, instead of distributing or retaining the spread of forestry machinery to the state and local governments, it is necessary to distribute timber production work centered on forest cooperatives or private timber producers to be carried out by wood producers, forest cooperatives and individuals.

• Journal of Korean Society on Water Environment
• /
• v.30 no.6
• /
• pp.647-652
• /
• 2014

The aim of this study was to investigate the heavy metal removal and biomass productivity in the Acid Mine Drainage (AMD) using eggshell and microalgae. The experiment was operated 6 days in the eggshell and microalgae hybrid system, and using eggshell powder and microalgae as Chlorella vulgaris. The obtained result indicated that the biomass productivity of 2.82 g/L/d from 1.12 g/L initial concentration in 6 days was reached with light transmittance of 97% at a 305 mm depth in the optical panel photobioreactor (OPPBR). The total removal efficiency of Fe, Cu, Zn, Mn and Cd was found to be 98.92%, 99.91%, 98.78%, 88.99% and 98.00% in the AMD using eggshell and Chlorella vulgaris hybrid system, respectively. Additionally, there were significant relationships between biomass and concentration of each heavy metal ($R^2$ = 0.8771, 0.8643, 0.8669, 0.9134 and 0.6277 for Fe, Cu, Zn, Mn and Cd). These results indicated that the eggshell and microalgae hybrid system was highly effective for heavy metal removal when compared to the conventional biological process in the AMD. Therefore, the eggshell and microalgae hybrid system was effective for heavy metal removal and biomass productivity and can be applied to treat AMD in treatment plant.

• Journal of the Korean Society of Combustion
• /
• v.15 no.2
• /
• pp.34-40
• /
• 2010

The effect of co-firing with pulverized coal and wood biomass on ignition and burn-out temperature was investigated at air and oxy-fuel conditions by thermo gravimetric analyzer(TGA). Three kinds of coal(shenhua, adaro, wira) were selected and mixing ratios of coal and wood biomass was set to 1, 0.5, and 0.8. The ignition temperature depended on the amount of volatile matter of blended fuel, while the burn-out temperature was dominated by the oxidant ingredients. The oxy-fuel condition with an oxygen ratio(Ofr,o) of 0.3 showed similar tendency with air condition in the heat flow measurement. Volatile matter reaction, however, became dominant when oxygen ratio exceeded 0.8 for co-firing combustion of wood biomass and pulverized coal.