• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.137-163
• /
• 1990

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the Properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of the consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfate and the magnesium sulfate promoted the hardening and the aluminium phosphate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect of the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate and cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.139-165
• /
• 1991

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfata and the magnesium sulfate promoted the hardening and the aluminium phoshpate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect fo the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near $250^{\circ}C$ and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate ad cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.421-428
• /
• 2005

Dissolved air flotation (OAF) is a solid-liquid separation system that uses fine bubbles rising from bottom to remove particles in water. In this study, we investigated the effect of L/W (L; Length, W; Width) on the hydro-dynamic behavior in DAF system using CFD (Computational Fluid Dynamics) and ADV (Acoustic Doppler Velocimetry) technique. The factual full-scale DAF system, L/W ratio of 1:1, was selected and various L/W ratio (2:1, 3:1, 4:1 and 5:1) conditions were simulated with CFD. For modelling, 2-phase (gas-liquid) flow equations for the conservation of mass, momentum and turbulence quantities were solved using an Eulerian-Eulerian approach based on the assumption that very small particle is applied in the DAF system. Also, for verification of CFD simulation results, we measured the factual velocity at some points in the full-scale DAF system with ADV technique. Both the simulation and the measurement results were in good accordance with each other. As the results of this study, we concluded that L/W ratio and outlet geometry play important role for flow pattern and fine bubble distribution in the flotation zone. In the ratio of 1:1, the dead zone is less than those in other cases. On the other hands, in the ration of 3:1, the fine bubbles were more evenly distributed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.158-167
• /
• 2018

The role of S/W in weapon systems has been developed with various functions and complex structures. As the weapon system S/W is directly related to quick and accurate decision making of users, more accurate evaluation is required during the training. However, situation awareness of weapon system S/W users has only been assessed qualitatively such as by simple test or qualitative judgement. Therefore, this study suggests the 'Cognition Ratio' concept which represents the quantitative of users by combining ACT-R cognitive architecture to SA (Situation Awareness) and Fitts' Law based on the theory of cognitive engineering. The cognition ratio is a ratio of cognition among the whole cognitive behavior process including perception and psychomotor. Moreover, this study provides a systematic assessment process of situation awareness that will be applicable to various weapon system S/W for effective assessment.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.3
• /
• pp.32-38
• /
• 2012

This paper is aimed to propose the design database(DB) of the inline micro-turbine for 5kW class. CFD analysis is performed to investigate the effect of a turbine on each parameter. This study showed that RadhaKrishna's data is different from the 5kW class in the low-head and the micro-turbine. Therefore, new DB for the design of inline micro-turbine for 5kW class could be needed. This study configured new design DB for the design of inline micro-turbine for 5kW class. The DB of this study showed that the optimal hub ratio(Dp/DR), the optimal body ratio(Db/DR) and the optimal range of body length ratio(Lh/DR) is 50%, 1.1 and 2.3 to 2.9, respectively.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.801-810
• /
• 2015

The ultimate pullout capacity under inclined dynamic loading is an important measure of the destruction degree of vertical screw piles (anchors) under dynamic actions. Based on the static and dynamic tests on two kinds of model screw piles, the ultimate bearing capacity was researched considering different distance-width ratio of blade (D/W) and preloading ratio. The results compared well with other experimental data available in the literature. This research reveals that D/W might determine the failure model of the piles (anchors), for example D/W = 3.14 or 5; a critical dynamic-static loading ratio (DSLR) existed in the experiments. The critical DSLR was reached under the conditions of 40%~60% preloading (D/W = 3.14) or 20%~40% preloading (D/W = 5), respectively.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.124-128
• /
• 1999

Product background of cement, sand and coarse aggregate differ from country to country, so that thermal behaviour of concrete make a difference in high temperature. To cope with demand, this paper is a study on compressive strength for W/C 45%, 55% and 65% by using domestic portland cement, Han-river sand, sea sand and crushed-coarse aggregate. As a result, it is shown that it is estimating to the mechanical properties of heated concrete specimens under various W/C ratio.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.365-374
• /
• 2010

The ash reduction effects and fuel property changes of spent mushroom substrates by acid solution extraction, and the production possibilities of wood pellet fuel using them were studied. The ash weight of spent Pleurotus eryngii substrates was reduced from 8.81%(w/w) to 3.33%(w/w), and calorific value was increased from 3,958.3 kcal/kg to 4219.2 kcal/kg when extracted with a mixture of Acetic acid 2%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $55^{\circ}C$ and extraction time 180 min. The ash weight of spent Flammulina velutipes substrates was reduced from 14.91%(w/w) to 4.07%(w/w), and calorific value was increased from 4,190.3 kcal/kg to 4,219.2 kcal/kg when extracted with a mixture of Acetic acid 3%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $65^{\circ}C$ and extraction time 180 min. The ash weight of spent Pleurotus osteratus substrates was reduced from 3.31%(w/w) to 0.59%(w/w), and the smallest reduction was in calorific value from 4,558.6 kcal/kg to 4,216.2 kcal/kg when extracted with a mixture of Acetic acid 1%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $65^{\circ}C$ and extraction time 180 min.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.2
• /
• pp.45-57
• /
• 1998

The object of this experiment was to determine the optimum mixing ratio of paper mill sludge and sewage sludge with woodchips as a bulking agent. The bulking agent was mixed with the mixture of paper mill sludge and sewage sludge(2:1 by dried weight) at the rates of 0(W-0), 20(W-20), 33(W-33), and 50(W-50)% on volume basis, and then the mixtures were composted by forced aerated static pile. The changes of physicochemical properties of the mixtures were measured during the composting in order to evaluate the maturity of composts. The temperatures of W-30 and W-50 treatments increased rapidly as soon as the composting started, and reached $60^{\circ}C$ in the fifth day of composting. Reduction of hot water soluble C/N ratio of W-33 and W-50 treatments showed faster than that of W-0 and W-20 treatments at early stage of the composting. The contents of hot water soluble $NO_3{^-}-N$ showed little change in the early stage of the composting in all treatments, but increased rapidly after 20 days of the composting, and the contents of W-0 among all treatments were lower than the others. The G.I. values of W-50 treatment were over 80 before 20 days after starting the composting, those of W-0 treatment were over 80 after 30 days. As a result of evaluation of compost, W-33 and W-50 treatments were found very reasonable at the mixing ratio of a bulking agent. But it is very difficult to aerate compost pile for W-50 treatment than W-33 treatment due to intensified fluctuation of temperature. Considering cost, availability of a bulking agent, and productivity of compost, W-33 treatments more efficient than W-50 treatment.

• Journal of the Korea Furniture Society
• /
• v.14 no.2
• /
• pp.31-38
• /
• 2003

This study was carried out to investigate characteristics of wood-based panels and wood-cement board for the possible uses as flooring and wall materials. The optimum cement/wood ratio(C/W ratio) of wood~cement board manufactured by clamp-pressing was from 2.7 to 3.2. The dimesional stability was superior in the C/W ratio of 3.2. Particularly, the dimensional stability of cement board using fine particle for particleboard face layer was favorable through three levels of C/W ratio. According to types of wooden material, bending strength of cement board using coarse particle for particleboard core layer or old newspaper(ONP) fiber was relatively higher than others. Thermal conductivities of wood-cement boards were no lower than that of gypsum board, and higher than those of plywood and boards. In case of wood-cement board of the C/W ratio of 2.7, the fire-proof performances of cement composite boards were greater than that of gypsum board, and weight loss reached to about a half of gypsum board. Then, wood-cement boards showed superior fire-proof performance compared to wood-based panels.