• 한국멀티미디어학회논문지
• /
• 제25권2호
• /
• pp.297-310
• /
• 2022

Road facilities such as CCTV poles have potential risk of collision accidents with a car. A collision detection algorithm installed in the facility allows the collision accident to be known remotely. Most collision detection algorithms are operated by simply focusing on whether a collision have occurred, because these methods are used to measure only acceleration data from a 3-axis sensor to detect collision. However, it is difficult to detect other detailed information such as malfunction of the sensor, collision direction and collision strength, because it is not known without witness the accident. Therefore, we proposed enhanced detection algorithm to get the collision direction, and the collision strength from the tilt of the facility after accident using a 9-axis sensor in this paper. In order to confirm the performance of the algorithm, an accuracy evaluation experiment was conducted according to the data measurement cycle and the invocation cycle to an detection algorithm. As a result, the proposed enhanced algorithm confirmed 100% accuracy for 50 weak collisions and 50 strong collisions at the 9-axis data measurement cycle of 10ms and the invocation cycle of 1,000ms. In conclusion, the algorithm proposed is expected to provide more reliable and detailed information than existing algorithm.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.347-354
• /
• 2021

화학공장과 같은 장치산업은 고온·고압·유독성 유체가 배관을 통하여 각종 설비들 사이를 이동한다. 온도변화, 진동, 지진, 지반침하와 같은 주변환경의 변화에 의한 배관의 위치 이동과 파손은 인명피해를 수반하는 큰 사고로 연결되는 경우가 많다. 이러한 사고를 방지하기 위하여 배관에 가해지는 각종 충격을 흡수하고, 보완하여 사고를 미연에 방지하기 위한 여러 가지 종류의 익스펜션 조인트(Expansion Joint)를 사용한다. 따라서 사용된 익스펜션 조인트의 변형을 측정하고, 수명을 예측하는 것은 대형사고를 방지하기 위하여 매우 중요하다. 본 논문에서는 익스펜션 조인트의 변형을 일종의 모션으로 이해하고, Hall Effect Sensor와 9-Axis Sensor를 사용하여 변화를 측정하였다. 그리고 범용의 마이컴보드 아두이노와 C언어를 사용하여 측정된 데이터를 모으고, 분석하여 익스펜션 조인트의 변형을 예측할 수 있는 시스템에 대하여 연구하였다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권12호
• /
• pp.585-588
• /
• 2015

사물이 실제로 움직이는 속도와 다양한 위치를 정확하게 인식하여 정확하게 3차원 영상정보로 표현하는 기술개발 시도는 무선센서를 활용하여 다양한 분야에서 응용할 수 있다. 3차원 위치 및 속도센서를 조합하여 이동 물체의 위치를 추적하는 시도는 동작의 정확성과 교정을 목적으로 하는 스포츠, 건강관리 분야 등에서 동영상 디스플레이 및 분석 기술과 접목하여 다양한 분석 정보를 제공할 수 있는 특징을 가지고 있다. 본 논문에서는 9축-센서로부터 수집되는 정보를 데이터베이스로 구축하고 이를 웹과 앱의 3차원 공간에서 모니터링할 수 있는 3D 모션 디스플레이를 개발하였다.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.876-882
• /
• 2010

Stroke patients can't use their hands because of the paralysis their fingers. Their fingers are recovered by rehabilitating training, and the rehabilitating extent can be judged by measuring the pressing force to be contacted with two fingers (thumb and first finger, thumb and middle finger, thumb and ring finger, thumb and little finger). But, at present, the grasping finger force of two-finger can't be accurately measured, because there is not a proper finger-force measuring system. Therefore, doctors can't correctly judge the rehabilitating extent. So, the finger-force measuring system which can measure the grasping force of two-finger must be developed. In this paper, the finger-force measuring system with a three-axis force sensor which can measure the pressing force was developed. The three-axis force sensor was designed and fabricated, and the force measuring device was designed and manufactured using DSP (Digital Signal Processing). Also, the grasping force test of men was performed using the developed finger-force measuring system, it was confirmed that the grasping forces of men were different according to grasping methods.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.183-190
• /
• 2022

Based on the linear electro-optic (EO) effect of lithium niobite (LiNbO₃, LN) crystal, an intense two-dimensional (2D) electric field sensor was analyzed, fabricated and experimentally demonstrated. The linear polarized light beam transmits along the optical axis (z-axis) of the LN crystal, and the polarization direction of the polarized light is 45° to the y-axis. The sensor can detect the intensity of a 2D electric field that is perpendicular to the z-axis. Experimental results demonstrated that the minimum detectable electric field of the sensor is 10.5 kV/m. The maximum detected electric field of the sensor is larger than 178.9 kV/m. The sensitivity of the sensor is 0.444 mV/(kV·m^-1). The variation of the sensitivity is within ±0.16 dB when the sensor is rotated around a z-axis from 0° to 360°. The variation of the sensor output optical power is within ±1.4 dB during temperature change from 19 ℃ to 26 ℃ in a day (from 7:00 AM to 23:00 PM) and temperature change from 0 ℃ to 40 ℃ in a controllable temperature chamber. All theoretical and experimental results revealed that the fabricated sensor provides technology for the direct detection of intense 2D electric fields.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권9호
• /
• pp.418-423
• /
• 2003

This paper describes an electronic compass using micromachined X- and Y-axis micro fluxgate sensors which were perpendicularly aligned each other to measure X- and Y-axis magnetic fields respectively. The fluxgate sensor was composed of rectangular-ring shaped magnetic core and solenoid excitation(49 turns) and pick-up(46 turns) coils. Excitation and pick-up coil patterns which were formed opposite to each other wound the magnetic core alternatively to improve the sensitivity and to excite the magnetic core in an optimal condition with reduced excitation current. The magnetic core has DC effective permeability of ~1000 and coercive field of ~0.1 Oe. The magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. To decrease the difference of induced second harmonic voltages from X- and Y-axis, excitation condition of 2.8 $V_{P-P}$ and 1.2 MHz square wave was selected. Excellent linear response over the range of -100 $\mu$T to +100 $\mu$T was obtained with 210 V/T sensitivity. The size of each micro fluxgate sensor excluding pad region was about 2.6${\times}$1.7 $mm^2$ and the power consumption was estimated to be 14 mW.W.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.400-403
• /
• 2018

4차 산업혁명의 핵심 기술인 가상현실(Virtual Reality)과 증강현실(Augmented Reality)의 발달로 인해 VR/AR 시장이 크게 성장하였다. 한국과학기술기획평가원(KISTEP)이 발표한 보고서에 따르면 2022년 전 세계 VR/AR 시장은 1050억 달러 규모로 성장하게 된다고 명시했다. VR/AR 시장 성장의 중요한 핵심은 사용자의 몰입감이다. VR은 디스플레이와 생체신호인식을 위한 센서 등 하드웨어의 기술의존도가 상당한데 사용자의 몰입감을 향상시키기 위해서는 센서의 데이터를 보다 정확하고 빠르게 디스플레이 기기에 전송하는 것이 중요하다. 본 논문에서는 VR의 센서 하드웨어 의존도를 고려하여 센서 디바이스를 이용하여 사용자 움직임이 디스플레이에 완전히 반영되는 시간 MTP(Motion to Photon)을 낮추기 위한 여러 가지 보정방법과 필터링에 대한 비교 실험을 진행하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권4호
• /
• pp.71-75
• /
• 2019

Sleep apnea is a disease that causes various complications, and the polysomnography is expensive and difficult to measure. The purpose of this study is to develop an unrestricted wearable monitoring system so that patients can be examined in a familiar environment. We used a method to detect sleep apnea events and to determine sleep satisfaction by non-constrained method using SpO2 measurement sensor and 3-axis acceleration sensor. Heart rate and SpO2 were measured at the finger using max30100. After acquiring the SpO2 data of the user in real time, the apnea measurement algorithm was used to transmit the number of apnea events of the user to the mobile phone using Bluetooth (HC-06) on the wrist. Using the three-axis acceleration sensor (mpu6050) attached to the upper body, the number of times of tossing and turning during sleep was measured. Based on this data, this algorithm evaluates the patient's tossing and turning during sleep and transmits the data to the mobile phone via Bluetooth. The power source used 9 volts battery to operate Arduino UNO and sensors for portability and stability, and the data received from each sensor can be used to check the various degree between sleep apnea and sleep tossing and turning on the mobile phone. Through thisstudy, we have developed a wearable sleep apnea measurement system that can be easily used at home for the problem of low sleep efficiency of sleep apnea patients.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1746-1754
• /
• 2016

In this paper, we provide a development and evaluation method for an archery posture analyzing system, using an inertial sensor. The system was developed using LabVIEW2014 by National Instruments and evaluated using the DTW algorithm. To convert the voltage value of the inertial sensor into a physical value, a coordinate transformation matrix bias was applied. To evaluate the similarity of movement in archery shooting, the DTW distance was calculated and similarity was confirmed based on simple mechanical movement, the same person's shooting movement, shooting movement with another person, and the noise signal. The average similarity comparison results were as follows: simple mechanical movement was 17.05%, the same person's shooting movement was 26.48%, shooting movement with another person was 62.8%, and the noise signal was 328.5%; a smaller value indicates a higher level of similarity. We confirmed the possibility of analyzing the archery posture using 3-axis acceleration of the inertial sensor. We inferred that the proposed method might be important means for assessing shooting skills, evaluation of archer's progress, and finding talented archers in advance.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.190-196
• /
• 2015

본 논문은 항법장치 위치보정을 위해 칼만필터를 적용한 GPS/INS융합의 다중보정방법을 제안한다. 연구에서는 관성항법장치를 구현하기 위해 9축 항법장치로 보정알고리즘을 적용하여 위치오차를 감소시킨 방법을 적용했다. 일반적으로 GPS/INS는 위치정보를 얻어낼 수 있지만 위치정보를 구하는 과정에서 오차 또한 더불어 커지게 되기에 이를 보정하기 위한 강인한 오차 보정 알고리즘이 필요하다. 본 논문에서는 9축 관성센서(mpu-9150)의 외란에 대한 강인성 향상을 위해 가속도계 보정 알고리즘을 사용하여 tilt보정을 수행했으며, 제어 대상체의 정확한 방위를 파악할 수 있도록 Yaw각 재정의 알고리즘을 적용하였다. 최종적으로 GPS/INS와 칼만 필터를 함께 결합한 통합시스템을 구현하였다.