• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.263-267
• /
• 2006

OFDM(A) 기반 네트워크는 IEEE 802.16e 시스템 및 WiBro 시스템 등으로 구현되고 있으며, 4G 시스템과 같은 차세대 이동통신 시스템의 기반 기술로서 많이 연구되고 있는 시스템이다. 이와 같은 OFDM(A) 시스템을 기반으로 IP 네트워크를 구축하게 된다면, 단말의 핸드오버를 지원하기 위하여 MAC 및 IP 계층에서의 핸드오버 기법에 대한 정의가 필요하다. IP 네트워크의 가장 큰 특징은 CDMA와 같은 서킷 네트워크가 아니라 패킷 네트워크라는 것이다. 이러한 패킷기반 네트워크에서의 소프트 핸드오버 기법은 CDMA 네트워크에서 제공되고 있는 소프트 핸드오버 기법을 그대로 적용할 수 없다. CDMA 소프트 핸드오버 기법은 물리계층에서의 신호 결합을 수행하게 되는데 패킷 네트워크에서 두 기지국으로부터 전송되는 패킷은 MAC 및 IP 헤더를 가지게 되고, 헤더에 포함되는 정보는 각 기지국에서 서로 다르게 전송하므로 물리계층에서의 신호 결합을 수행할 수가 없다. 본 논문에서는 기존에 제안된 소프트 핸드오버 기법의 단점을 보완하고 IP 기반 네트워크에 적용 가능한 소프트 핸드오버 기법을 제안한다. 제안하는 소프트 핸드오버 기법은 패킷 네트워크의 특성을 반영하여 소프트 핸드오버에 참여하는 기지국이 서로 다른 패킷을 전송하도록 디자인하였고, 에러 발생률을 낮추기 위하여 AMC (Adaptive Modulation and Coding) 기법을 적용하였다. 또한 OFDM(A) 시스템의 multi-carrier 특성을 이용하여 네트워크 자원을 효율적으로 사용함으로써 네트워크의 전체적인 성능 향상이 가능하도록 개발되었다.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.719-731
• /
• 2008

This paper defines QoE (Quality of Experience) for multi-view video streaming service over WiBro and proposes the CLO (Cross-Layer Optimization) algorithm can maximize this. Proposal CLO algorithm contains from physical layer to video layer. Under the time-varying wireless channel condition, the CLO technique takes view-wise and the temporal priority of the multi-view video into consideration in order to decide the transmission of frames and its FEC level. At the handover situation, it is shown through computer simulation that the optimal quality of the multi-view video can be achieved using the minimum amount of resources if the proposed CLO technique is applied.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.168-171
• /
• 2003

IEEE 802.16 Wireless MAN standard specifies the air interface of fixed point-to-multipoint broadband wireless access systems providing multiple services. Among the service classes supported by the wireless MAN, the best effort service class is ranked on the lowest position in priority and is assisted by a MAC scheme based on reservation ALOHL Such MAC scheme must include a number of components, while many of them are not specified in the standard. In this paper, we thus reveal main components of a MAC scheme supporting the best effort service and present candidate schemes implementing such components. Combining schemes for implementing components, we then construct distinctive MAC schemes supporting best effort service. In designing a MAC scheme, the delay performance induced by the scheme should be considered since scarce resource may be available for the best effort service after the preemptive resource occupation by other service classes. In this paper, we focus on the delay fairness among the subscriber stations using the best effort service. For evaluating a MAC scheme in delay fairness, we present two definitions of delay fairness and provide a criterion for optimal MAC scheme according to each definition of delay fairness. Using a simulation method we investigate the mean delay performance exhibited by each MAC scheme arid find an optimal scheme in delay fairness. From numerical examples, we observe that SR/ED/PG＋P scheme has strong delay fairness compared with MR/ED/PG＋P and SR/ED/PG＋D schemes according to a definition of delay fairness. However, other schemes are rather shown to have better delay fairness when the other definition is adopted.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.798-802
• /
• 2013

In a conventional DC power supply used for CO2 laser, the circuit elements such as a rectifier bridge, a current-limiting resistor, a high voltage switch, energy storage capacitors ans a high-voltage isolation transformer using high turn ratio are necessary. Consequently, those supplies are expensive and require a large space. Thus, laser resonator and power supply should be optimally designed. In this paper, we propose a new power supply using high frequency resonance phenomena for CW(Continuous wave) CO2 laser (maximum output of 23W with discharge length of 450mm). It consists of a transformer including leakage inductance, magnetizing inductance and half-bridge converter, a three-stage Cockcroft-Walton and PFC(Power factor correction) circuit. The output ripple voltage can be controlled the minimum of 0.24% under the high frequency switching of 231kHz. Furthermore, the output efficiency was improved to 16.4% and the laser output stability of about 5.6% was obtained in this laser system.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.397-406
• /
• 2014

Radio frequency (RF) jamming is a denial of service attack targeted at wireless networks. In resource-hungry scenarios with constant traffic demand, jamming can create connectivity problems and seriously affect communication. Therefore, the vulnerabilities of wireless networks must be studied. In this study, we investigate a particular type of RF jamming that exploits the semantics of physical (PHY) and medium access control (MAC) layer protocols. This can be extended to any wireless communication network whose protocol characteristics and operating frequencies are known to the attacker. We propose two efficient jamming techniques: A low-data-rate random jamming and a shot-noise based protocol-aware RF jamming. Both techniques use shot-noise pulses to disrupt ongoing transmission ensuring they are energy efficient, and they significantly reduce the detection probability of the jammer. Further, we derived the tight upper bound on the duration and the number of shot-noise pulses for Wi-Fi, GSM, and WiMax networks. The proposed model takes consider the channel access mechanism employed at the MAC layer, data transmission rate, PHY/MAC layer modulation and channel coding schemes. Moreover, we analyze the effect of different packet sizes on the proposed jamming methodologies. The proposed jamming attack models have been experimentally evaluated for 802.11b networks on an actual testbed environment by transmitting data packets of varying sizes. The achieved results clearly demonstrate a considerable increase in the overall jamming efficiency of the proposed protocol-aware jammer in terms of packet delivery ratio, energy expenditure and detection probabilities over contemporary jamming methods provided in the literature.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.45-52
• /
• 2005

This paper proposes low latency handover procedure for seamless connectivity and QoS support between wired (e.g. Ethernet) and wireless (e.g. WLAN, WiBro(802.16-compatible), CDMA) networks by the mobile-assisted and server-initiated handover strategy. It is assumed that the server decides the best target network considering network status and user preferences. In this procedure, a mobile terminal associates with the wireless link decided at the server in advance and receives CoA as well. When handover occurs without the prediction in wired networks, the server performs fast binding update using physical handover trigger through the MIH (media independent handover) function. As a result, a mobile terminal does not need to perform L2 and L3 handover during handover so that this procedure decreases handover latency and loss.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.9-16
• /
• 2011

This paper represents an interworking architecture for keeping the VLC audio quality between Worldwide Interoperability for Microwave Access (WiMAX) and IEEE 802.11 Mobile Ad hoc Network (MANET) where both mobile routers and mobile nodes are moving dynamically. Systematic performance analysis on the interworking architecture has been conducted by using OPNET simulator to show the results such as Packet Delivery Ratio (PDR) and throughput. Based on simulation results, when the number of MANET nodes is small, PDR remains relatively stable even though data packets increase. However, with the many MANET nodes, PDR decreases as data traffic increases. Throughput is affected by the number of MANET nodes. Especially when the MANET node density has increased further, throughput is much higher, but it is not affected by the mobility speed. However, FTP download and upload response time is not affected much by both the number of MANET nodes and the mobility speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1101-1112
• /
• 2006

With the recent growth in demand for high-data rate multimedia services in the wireless environments, the Mobile Broadband Wireless Access (MBWA) technologies, such as WiBro (Wireless Broadband internet) system, are gradually coming into the spotlight. Unlike the conventional mobile communication networks based on cellular system, the WiBro system basically consists of IP based backbone networks that will be ultimately deployed by Ipv6 (IP version six) based backbone networks according to the All-IP trend for the network evolution. In such wireless mobile environments, it is needed to support the mobility management protocol on network layer as well as physical layer and Medium Access Control (MAC) layer in WiBro system. Accordingly, in this paper, we propose a fast handover scheme for improving the handover performance in IPv6 based WiBro system and show that the proposed scheme achieves loss-free and low handover latency during inter-subnet movement of the mobile stations through the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.505-516
• /
• 2012

According to distribute of resource of macro cell and reduce distance between transmitter and receiver, Femto cell system is promising to provide costeffective strategy for high data traffic and high spectral efficient services in future wireless cellular system environment. However, the co-channel operation with existing Macro networks occurs some severe interference between Macro and Femto cells. Hence, the interference cancellation or management schemes are imperative between Macro and Femto cells in order to avoid the decrease of total cell throughput. First, we briefly investigate the conventional resource allocation and interference cancellation scheme between Macro and Femto cells. So we found that cell throughput and frequency reuse ware decreased Then, we propose an adaptive resource allocation scheme based on the distribution of Femtocell traffic in order to increase the cell throughput and also maximize the spectral efficiency over the FFR (Fractional Frequency Reuse) based conventional resource allocation schemes. Simulation Results show that the proposed scheme attains a bit similar SINR (Signal to Interference Noise Ratio) distribution but achieves much higher total cell throughput performance distribution over the conventional resource allocation schemes for FFR and future IEEE 802.16m based Femtocell network environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1783-1791
• /
• 2010

Mobile WiMAX system provides broadband wireless access with a variety of services such as voice, video and data communications and providing QoS for each of these services become an important issue. In Mobile WiMAX system, it is important to allocate resources appropriately in order to support the efficient utilization of resources among various real-time and non real-time services. Although many packet scheduling schemes for real-time services in OFDMA system have been proposed, it need to be modified to apply to Mobile WiMAX system. Since Mobile WiMAX supports five types of service classes, QoS constraints of each class should be taken into consideration. In this paper, we propose an efficient packet scheduling scheme to support various services by considering the QoS constraints of each class.