• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.303-304
• /
• 2012

본 논문에서는 IEEE 802.11e 무선 애드 혹 네트워크 환경에서의 Throughput 향상을 위한 자원 할당 기법을 제안하였다. 제안하는 기법은 무선 애드 혹 네트워크에서 전송 홉 수 증가 및 네트워크 혼잡 상황에 따른 전송 손실을 최소화 하기 위한 기법으로 전송 큐 상태를 주기적으로 측정하여 큐에 쌓여지는 데이터의 가속도와 전송 큐에 쌓여있는 데이터의 비율을 측정한다. 측정된 가속도와 데이터의 비율을 통해 네트워크 상황에 적합한 자원을 할당하는 기법이다. 제안한 기법을 통해 무선 애드 혹 네트워크 환경에서 전송 홉 수 증가 및 네트워크 혼잡 상황에서의 성능 감소를 개선할 수 있었다.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.311-321
• /
• 2014

This paper focuses on contention-based medium access control (MAC) protocols used in wireless local area networks. We propose a novel MAC protocol called adaptive backoff tuning MAC (ABTMAC) based on IEEE 802.11 distributed coordination function (DCF). In our proposed MAC protocol, we utilize a fixed transmission attempt rate and each node dynamically adjusts its backoff window size considering the current network status. We determined the appropriate transmission attempt rate for both cases where the request-to-send/clear-to-send mechanism was and was not employed. Robustness against performance degradation caused by the difference between desired and actual values of the attempt rate parameter is considered when setting it. The performance of the protocol is evaluated analytically and through simulations. These results indicate that a wireless network utilizing ABTMAC performs better than one using IEEE 802.11 DCF.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1371-1374
• /
• 2005

지금까지 IEEE 802.11 WLAN 에서 많이 연구되어진 주제는 노드들 간의 공평성(fairness)과 처리량(throughput)을 높이는데 중점이 맞추어진 것들이 대부분이었다. 성능을 높이기 위한 AP의 CW값에 관한 연구는 노드들 간에 관한 연구에 비하여 비교적 적은 편이다. 지금은 노드들과 AP가 충돌하게 되면 BEB(Binary Exponential backoff)방식으로 셋팅되어 사용하게 있기 때문에 1:N의 불공평한(unfairness) 상황이 발생한다. AP에서 노드들로 가는 하향링크(downlink) 전송이 많은 상황에서 AP가 다른 노드들과 똑같은 채널 접근확률을 가지는 것은 바람직하지 않기 때문에 AP에게 우선권(priority)을 주어 전체 성능을 높이는 것이 필요하다. 따라서 본 논문에서는 AP의 CW(Contention Window)값이 변화함에 따라 전체 성능에 끼치는 영향과 노드 수의 변화에 따른 AP의 적절한 백오프 CW값을 분석해 보고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.683-684
• /
• 2009

최근 IEEE 802.11n 표준의 상용화와 함께 무선랜 환경에서 실시간 멀티미디어 서비스를 이용하려는 수요가 증가하고 있다. 그러나 IEEE 802.11i 보안표준에서 정의한 IEEE 802.1x 인증과정은 끊김 없는 실시간 멀티미디어 서비스를 제공하기에는 핸드오프 지연시간이 너무 길다. 본 논문은 Ticket이라는 새로운 인증 기법을 도입하여 고속의 로밍을 지원하는 핸드오프 메커니즘을 소개한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.64-72
• /
• 2012

Synchronization including timing recovery, frequency offset compensation, and frame synchronization is most important signal processing block in all wireless/wired communication systems. In most communication systems, synchronization schemes based on training sequences or preambles are used. WLAN standards of 802.11a/g/n released by IEEE are based on OFDM systems. OFDM systems are known to be much more sensitive to frequency and timing synchronization errors than single carrier systems. A loss of orthogonality between the multiplexed subcarriers can result in severe performance degradations. The starting position of the frame and the beginning of the symbol and training symbol can be estimated using correlation methods. Correlation processing functionality is usually complex because of large number of multipliers in implementation especially when the reference signal is non-binary. In this paper, a simple correlation based synchronization scheme is proposed for IEEE 802.11a/g/n systems. Existing property of a periodicity in the training symbols are exploited. Simulation and implementation results show that the proposed method has much smaller complexity without any performance degradation than the existing schemes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.643-646
• /
• 2002

In this paper, we analyse the performance of the system connected with several networks, that is, the system has one bulk input and several server by using queueing model - G $I^{⒳}$/M/c/N. in this paper we investigate some parameters from steady state probability and examine the average waiting time and blocking probability from those parameters.s.

• The Magazine of the IEIE
• /
• v.35 no.2
• /
• pp.81-89
• /
• 2008

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.741-753
• /
• 2008

This paper explores the throughput performance of CSMA/CA-based DCF protocol over both ideal channels and fading channels with payload size at the MAC layer in the 802.11a wireless LAN. In the ideal channel, there are no errors and at the transmission cycle there is one and only one active station which always has a packet to send and other stations can only accept packets and provide acknowledgements. In the fading channel, bit errors appear in the channel randomly and the number of stations is assumed to be fixed. And each station always has packets for transmission. In other words, we operate in saturation conditions. Up to now conventional research work about DCF throughput analysis of IEEE 802.11 a wireless LAN has been done over the ideal channel, but this paper is done over the Rayleigh/Ricean fading channel. So, the ratio of received average energy per bit-to-noise power spectral density $E_b/N_o$ is set to 25 dB and the ratio of direct-to-diffuse signal power in each sub-channel $\xi$ is set to 6 for combined Rayleigh/Ricean fading channel. In conclusion, it is shown that the saturation throughput is always less than the maximum throughput at all the payload size and the higher the transmission rate be, the higher the decreasing rate of saturation throughput compared to the maximum throughput be.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.178-203
• /
• 2018

In this paper, authors have been evaluated the Frame Error Rate (FER) performance of IEEE 802.11 a/g/p standard 5 GHz frequency band WLAN over Rayleigh and Rician distributed fading channels in presence of Additive White Gaussian Noise (AWGN). Orthogonal Frequency Division Multiplexing (OFDM) based transceiver is implemented by using real-time signal processing frameworks (IEEE 802.11 Blocks) in GNU Radio Companion (GRC) and Ettus USRP N200 is used to process the symbol over the wireless radio channel. The FER is calculated for each sub-carrier conventional modulation schemes used by OFDM such as BPSK, QPSK, 16, 64-QAM with different punctuated coding rates. More precise SNR is computed by modifying the SNR calculation process of YANS and NIST error rate model to estimate more accurate FER. Here, real-time signal constellations, OFDM signal spectrums etc. are also observed to find the effect of multipath propagation of signals through flat and frequency selective fading channels. To reduce the error rate due to the multipath fading effect and Doppler shifting, channel estimation (CE) and equalization techniques such as Least Square (LS) and training based adaptive Least Mean Square (LMS) algorithm are applied in the receiver. The simulation work is practically verified at GRC by turning into a pair of Software Define Radio (SDR) as a simultaneous transceiver.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.20-28
• /
• 2017

A fully integrated dual-band CMOS power amplifier (PA) is developed for 802.11n WLAN applications using wafer-level package (WLP) technology. This paper presents a detailed design for the optimal impedance of dual-band PA (2 GHz/5 GHz PA) output transformers with low loss, which is provided by using 2:2 and 2:1 output transformers for the 2 GHz PA and the 5 GHz PA, respectively. In addition, several design issues in the dual-band PA design using WLP technology are addressed, and a design method is proposed. All considerations for the design of dual-band WLP PA are fully reflected in the design procedure. The 2 GHz WLP CMOS PA produces a saturated power of 26.3 dBm with a peak power-added efficiency (PAE) of 32.9%. The 5 GHz WLP CMOS PA produces a saturated power of 24.7 dBm with a PAE of 22.2%. The PA is tested using an 802.11n signal, which satisfies the stringent error vector magnitude (EVM) and mask requirements. It achieved an EVM of -28 dB at an output power of 19.5 dBm with a PAE of 13.1% at 2.45 GHz and an EVM of -28 dB at an output power of 18.1 dBm with a PAE of 8.9% at 5.8 GHz.