• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.130-134
• /
• 2020

This paper proposes a new method for the digit recognition on a 7-segment display. The proposed method uses morphological processing that dilates segments of digits and connects them into strokes. The digits are extracted by connected component analysis and finally, template matching method recognizes the extracted digits. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. Experiments were conducted by using various 7-segment LED displays and 7-segment mono LCD displays. The results show that the proposed method is successful for the digit recognition on the 7-segment displays.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.60-63
• /
• 2000

In this paper, 7-segment was implemented using AC powder EL. ZnS:Cu and BaTiO3 was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectric layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display, driving circuit, software for driving. The properties of fabricated devices was measured with EL spectrum and brightness.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.3
• /
• pp.11-17
• /
• 1978

A medium scale integrated circuit, BCD to seven segment decoder/driver is designed and fabricated by employing P-channel metal-oxide-semiconductor technology. The device configuration is specifically designed for a common cathode seven segment LED display unit. The decoder logic is composed of two serially connected read-only-memory matrices and the LED drivers are implemented with wide channel FET's. The fabricated integrated circuit performed successfully with a supply voltage between -7 Volt and -26 Volt and the non-uniformity of the LED segment current is about 10%.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1526-1528
• /
• 1999

In this papaer, 7-segment was implemented using AC powder EL. ZnS:Cu and $BaTiO_3$ was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectic layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display. driving circuit. software for driving. The properties of fabricated devices was measured with EL spectrum. brightness and J-V.

• Journal of applied mathematics & informatics
• /
• v.7 no.2
• /
• pp.629-640
• /
• 2000

this paper present an efficient line-drawing algorithm that reduces the amount of space required, Because of its efficiency , this line-drawing algorithm is faster than the Bresenham algorithm or the recursive bisection method. this efficiency was achieved through a new data structure; namely , the modified segment tree (MST). Using the modified segment tree and the distribution rule suggested in this paper, we dra lines without generating the recursive calls used in [3] and without creating the binary operation used in [4]. we also show that line accuracy improves in proportion to the display resolution . In practice, we can significantly improve the algorithm's performance with respect to time and space, This improvement offer an increase in speed, specially with lines at or near horizontal, diagonal. or vertical ; that is, this algorithm requires the time complexity of (n) and the space complexity O(2k+1), where n is the number of pixels and k is a level of the modified segment tree.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.590-593
• /
• 2009

In the 2D local dimmable LED backlight system, each LED segment can be controlled separately. This can enhance the contrast ratio and reduce overall power consumption of LCDs. However, an artifact such as 'halo mura' can be observed around the bright object in the dark background. This is caused by the light leakage from the bright area into the dark one. Therefore, the 'halo mura' can be more easily observed in the oblique viewing direction. Thus, in this study, the perceivable degree of the halo mura is evaluated according to the level of the off-axis light leakage of LCDs. It is found that an acceptable degree of halo mura can be obtained in 2.0 cd/$m^2$ of the diagonal light leakage. In addition, the halo mura is unperceivable under 0.7 cd/$m^2$ of the diagonal light leakage which can be achieved with optimally compensated polarizers.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.357-359
• /
• 2010

본 논문에서는 논리 설계를 위해서 I-ROB 3000이라는 로봇 키트를 사용하여 논리 설계를 검증하였다. 이 검증에는 iRoV-Lab 3000의 장착된 로봇 모듈인 FPA 모듈,Stepper Motor 모듈,적외선 송수신센서 모듈, 카메라 모듈,RF 모듈 LED,TEXT LCD, 7-segment를 제어하기 위한 FPGA를 사용하며,FPGA설계를 위해 Schematic Design 또는HDL에 대해 연구한다.로봇 설계 시스템의 내부구조를 이해하고 개발환경을 구축할수 있다. 로봇의 구성요소와 각각의 구성요소(Sensor 모듈,display 모듈, Stepper Motor 모듈,RF 모듈)의 동작 원리를 개발한다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.360-362
• /
• 2010

본 논문에서는 SoC 키트에 해당하는 iRoV-Lab 3000의 장착된 로봇 모듈인 FPA 모듈, Stepper Motor 모듈, 적외선 송수신 센서 모듈, 카메라 모듈, RF 모듈 LED, TEXT LCD, 7-segment를 제어하기 위한 FPGA를 사용하며, FPGA설계를 위해 Schematic Design 또는 HDL에 대해 연구한다. FPGA의 내부구조를 이해하고 개발환경을 구축할 수 있다. 로봇의 구성요소와 각각의 구성요소(Sensor 모듈, display 모듈, Stepper Motor 모듈, RF 모듈)의 동작 원리를 개발한다.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.529-532
• /
• 2005

A novel amphiphilic, symmetric rod-coil, triblock copolymer (denoted as PHEMA-b-PF-b-PHEMA) of poly(9,9-didodecylfluorene-2,7-diyl) (PF) and poly(hydroxyl ethyl methacrylate) (PHEMA) was synthesized. A $\pi$-conjugated poly(9,9-didodecylfluorene-2,7-diyl) (PF) was used as a rodlike midblock segment and connected with hydrophilic end blocks of poly(hydroxyl ethyl methacrylate) (PHEMA) by using an ATRP technique. The chemical structure of PHEMA-b-PF-b-PHEMA was confirmed by $^{1}H$-NMR and GPC, and its PL properties were investigated in selected solvents. Due to the dissimilarities in molecular conformation and solubility between PHEMA and PF blocks, both block segments were segregated to display a phase-separated morphology on a Si wafer.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.10-14
• /
• 2015

Video Content owners seek to squeeze the maximum amount of revenue from their assets via distribution into more territories. Digital Cinema Package(DCP), trusted solution to distribute protected content to theaters, caters to relatively small user base, which limits revenue. With the growth of the Internet & other digital media, the economics of media content has changed dramatically. Security remains main concern to deliver content to millions of consumers using intelligent digital display devices like Tablets, Smartphones, Smart TVs, Desktop & Laptop. By making the video content available to this segment securely, content owners will benefit from increased revenue. Through this paper we propose Open Source HomeDCP model to distribute the content to home users for offline viewing. We propose to include other open source CODEC than JPEG2000/MPEG2, which are specifically designed for theatrical performance. Final image size will be further reduced considering the display device resolution where video will be finally played. Key Delivery Message(KDM) system to be altered to suit new devices. This will be a big boost to Content Economy as content owners would be able to distribute the content securely to the wider audience & ensure more revenue.