• 약학회지
• /
• 제31권4호
• /
• pp.219-223
• /
• 1987

2-Cyclohexylimino-3-cyclohexyl-5-methyl-4-oxo-2H, 5H-1, 3-oxazino [5,6-C]-1, 2-benzothiazine-6,6-dioxide 2 was hydrolized in d-HCl/$CH_3$CN to give 5-methyl-3-cyclohexyl-2H, 5H-1, 3-oxazino [5, 6-C]-1, 2-benzothiazine-2, 4(3H)-dione 6, 6-dioxide 3 in 82% yield. The alkaline hydrolysis of 3 afforded to 4-hydroxy-2-methyl-N-(cyclohexyl)-2H-1, 2-benzothiazine-3-carboxamide-1, 1-dioxide 4 in 88% yield. On the other hand 3 was synthesized from 4 and ethylchloroformate on the reversed procedure.

• 미생물학회지
• /
• 제37권1호
• /
• pp.66-71
• /
• 2001

1.5 L 교반 탱크반응조에서 이미 그 특성 이 밝혀진 TNT 분해세균인 Stenorophomonas maltophilia의 배양을 이용하여 dinitrotoluenes (DNTs) [2,4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT)]를 호기적 조건하에서 미생물학적으로 제거하는 시험을 하였다. 2,4-DNT와 2,6-DNT는 각각 10일과 14일의 배양기간 중에 완전히 분해되었다. 이차 탄소는 DNT리 분해에 필수적이었으며 이차 탄소가 없는 상태에서는 거의 분해되지 않았다. DNTs의 분해에 이차 탄소가 미치는 효과에 대하여 조사하였다. 이차 질소원이 없는 상태에서 DNTs는 완전히 분해되었으나 이차 탄소원이 첨가된 배지에서는 부분적으로 분해되었다. HPLC와 GC-MS가 잔존 DNTs와 중간대사산물을 확인하기 위하여 사용되었다. 그 결과, HPLC와 GC-MS chromatograms은 대상 화합물인 2,4-DNT와 2,6-DNT, 그리고 각각의 중간대사산물인 2-amino-4-nitrotoluene과 2-amino-6-nitrotoluene을 성공적으로 확인할 수 있었다.

• 한국잠사곤충학회지
• /
• 제45권1호
• /
• pp.25-30
• /
• 2003

뇌신경세포주(PC12)에 백강잠의 분획물(조추출물)을 10 $\mu\textrm{g}$/ml 농도로 처리한 결과 헥산분획층과 부탄올분획층에서 뇌신경세포성장을 촉진하는 활성을 나타내어 헥산분획물로부터 화합물 4종(Fig.2: compound 1-4)과 부탄올분획물로부터 화합물 5종(Fig.2: compound 5-9)을 분리하여 각각의 화합물에 대하여도 검색한 결과 모두 뇌신경세포주(PC12)에 뇌신경세포 성장 촉진효과를 나타냈으며 특히 이들중 3종(4E, 6E, 2S, 3R)-2-N-Eicosanoy1-4,6-tetrade-casphingadienine,(4E, 6E, 2S, 3R)-2-N-Docosanoyl-4,6-tetradecasphingadienine, Urea)이 화합물은 NGF보다 우수한 활성을 나타냈다. 또한 헥산분획물로부터 분리한 4종의 스핑고신 유도체는 천연에서 처음 보고되는 물질이다. 이러한 결과로부터 백강잠 유래의 유효성분을 함유하는 추출물은 뇌졸중, 뇌허혈, 파킨슨, 노인성치매 및 헌팅턴질환을 포함하는 뇌질환 예방 및 치료를 위한 약학적 제제로 활용할 수 있을 것으로 기대된다.

• 소성∙가공
• /
• 제29권4호
• /
• pp.211-217
• /
• 2020

This paper presents a study on the hydrogen embrittlement of Ti-6Al-4V alloys with different microstructures depending on annealing treatment. They were electrochemically charged with hydrogen and subjected to tensile tests to investigate hydrogen embrittlement behavior. Tensile test results showed that the elongation of Ti-6Al-4V alloy specimens was remarkably decreased with increasing the volume fraction of β phase after hydrogen charging. This is because the β phase with a relatively low diffusivity tends to easily form a hydride at grain boundaries during electrochemical hydrogen charging. After hydrogen charging of the Ti-6Al-4V alloy specimen, it found that silver particles were decorated mostly at the grain boundary, and coarser silver particles were usually formed in the specimen annealed at 950 ℃. Therefore, the specimen having higher β phase fraction shows a poor hydrogen embrittlement resistance because the β phase promotes the formation of coarse hydride during electrochemical hydrogen charging, which leads to a large decrease in ductility.

• 대한통합의학회지
• /
• 제7권4호
• /
• pp.89-104
• /
• 2019

Purpose : The purpose of this study was to investigate the development of korean vowels by acoustically analyzing whether children produce Korean vowels differently according to their age and gender between ages 4 and 6. Methods : A total of 104 children aged 4~6 years (56 males and 48 females) participated in this study. The participants were classified as either 4, 5, or 6 years old. Vowel speech data was obtained by asking the subjects to pronounce meaningful words in which the vowel in question was located in the first syllable. Speech analysis was performed using the Multi-speech 3700 program. Results : Age, gender, and vowel being pronounced all had significant effects on intensity. There was significant decrease with increasing age, and the intensity was significantly higher in male children than female children. Neither age, gender, nor the vowel being produced affected the fundamental frequency. The fundamental frequency produced did not differ by age or gender. The first and second formants had considerable effect on age and vowels, significantly decreased with age, and did not have a gender difference. Conclusion : The results of this study showed that children aged 4~6 have similar anatomical structures, but that maturity of speech motor skills required to pronounce vowels was correlated with age. The results of this study can be used to evaluate children's speech and develop speech therapy programs.

• Corrosion Science and Technology
• /
• 제22권4호
• /
• pp.257-264
• /
• 2023

Ti-6Al-4V alloys are mainly used as dental materials due to their excellent biocompatibility, corrosion resistance, and chemical stability. However, they have a low bioactivity with bioinertness in the body. Therefore, they could not directly bond with human bone. To improve their applications, their bone bonding ability and bone formation capacity should be improved. Thus, the objective of this study was to improve the bioinert surface of titanium alloy substrate to show bioactive characteristics by performing surface modification using wollastonite powder. Commercial bioactive wollastonite powder was successfully deposited onto Ti-6Al-4V alloy using a room temperature spray process. It was found that wollastonite-coated layer showed homogeneous microstructure and uniform thickness. Corrosion resistance of Ti-6Al-4V alloy was also improved by plasma electrolytic oxidation treatment. Its wettability and bioactivity were also greatly increased by wollastonite coating. Results of this study indicate that both plasma electrolytic oxidation treatment and wollastonite coating by room temperature spray process could be used to improve surface bioactivity of Ti-6Al-4V alloy substrate.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.29-35
• /
• 2001

The cutting characteristics of Ti-6Al-4V alloy and total wear when machining Ti-6Al-4V alloy was studied to understand the machining characteristics. This material is one of the strong candidate materials present and future aerospace or met ical applications. Nowadays their usage has already been broaden to commercial applications such as golf club head, finger rings and many decorative items. Anticipating the general use of this material and development of the titanium alloy in domestic facilities, the review and the study of the machining parameters far those alloys are deemed necessary. This study is concentrated to the machining parameters of the Ti-6Al-4V alloy due to their dominant position in the production of tita mum alloys.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.129-131
• /
• 2011

Hight speed memory application을 위하여 6.4-Gb/s/channel 4-PAM transceiver가 제안된다. Voltage margin과 time margin용 증가시키기 위하여 asymmetric 4-PAM scheme과 이를 위한 회로를 제안한다. 제안된 asymmetric 4-PAM scheme은 기존 회로에 비하여 송신단에서 33%의 기준전압 노이즈 영향을 줄인다. Channel의 ISI를 줄이기 위해서 transmitter의 1-tap pre-emphasis가 사용된다. 제안된 asymmetric 4-PAM transceiver는 1.2V supply 0.13um 1-poly 6-metal CMOS 공정에서 구현되었다. PLL을 포함한 1-channel transceiver의 면적과 전력소모는 각각 $0.294um^2$와 6mW이다.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.222-232
• /
• 2006

Objectives: The objective of this study was to propose the total isocyanate analytical method which involves derivation of 2,4-toluene diisocyanate(2,4-TDI), 2,6-toluene diisocyanate(2,6-TDI), 4,4'-methylenediphenyl diisocyanate(4,4'-MDI) and 1,6-hexamethylene diisocyanate(1,6-HDI) using 2-chlorobenzyl alcohol(2-CBA) or 2,4-dichlorobenzyl alcohol(2,4-DCBA), and analyzing of hydrolysate of the synthesized urethane with the gas chromatography(GC)/flame ionization detector(FID), GC/pulsed discharge ionization detector-electron capture detector(PD-ECD) and GC/mass selective detector(MSD). Methods: Urethanes were synthesized by reacting 2,4-TDI, 2,6-TDI, 4,4'-MDI and 1,6-HDI to 2-CBA or 2,4-DCBA. Urethanes was verified by TLC, HPLC/UVD and GC/MSD. For field application, the most suitable condition that 2-CBA coated in glass fiber filter removed completely and urethanes were not removed was searched. 2-CBA generated from hydrolysis of urethanes according to hydrolysis conditions. Diisocyanates were collected on field air and analyzed. Results: Urethanes which were white and solid phase synthesized by reacting 2,4-TDI, 2,6-TDI, 4,4'-MDI, 1,6-HDI and 2-CBA or 2,4-DCBA. And urethanes were verified by TLC, HPLC/UVD and GC/MSD. The most suitable conditions to remove 2-CBA coated in glass fiber filter were $87^{\circ}C$ and 20 mmHg and urethanes were not removed under same condition. Hydrolysis yields of urethanes were 99 % to 111 %. 2-CBA, the hydrolysate of urethanes was analyzed by GC/FID, GC/PD-ECD and GC/MSD. Conclusions: Simultaneous analysis of 2,4-TDI, 2,6-TDI, 4,4'-MDI and 1,6-HDI deriving with 2-CBA and 2,4-DCBA, along with a total isocyanate analysis, was feasible with GC/FID, GC/PD-ECD and GC/MSD. This result will be a guide of further study on total isocyanate analysis.

• 대한화학회지
• /
• 제46권3호
• /
• pp.213-218
• /
• 2002

(${\eta}^5$-Cyclopentadienyl)(${\eta}^6$-1,2,3,4-tetramethyl-1,4-dibora-2,5-cyclohexadiene)Ni(5)는 cyclopentadienyl (carbonyl)-nickel dimer와 1,2,3,4-tetramethyl-1,4-dibora-2-cyclohexene (1)을 반응시켜서 주생성물로 얻었다. Di-allyl nickel과 2,3-diethyl-1,4-dimethyl-1,4-dibora-2-cyclohexene (2)을 -20$^{\circ}C$에서 반응시켜서 bis[${\eta}^6$-2,3-dimethyl-1,4-diethoxy-1,4-dibora-2,5-cyclohexadiene]nickel (6) 착화합물을 15% 수율로 생성하였다. 그리고 야-allyl nickel과 2,3-dimethyl-1,4-diethoxy-1,4-dibora-2-cyclohexene (3)을 역시 -20$^{\circ}C$에서 반응시켜서 22% 수율로 bis[${\eta}^6$-2,3-dimethyl-1,4-diethoxy-1,4-dibora-2,5-cyclohexadiene] nickel (7)을 생성하였다. 이들 double-decker 착화합물들은 불안정하여 분리하기 어려웠으며, NMR, MS, 원소분석 등으로 확인하였다.