• Journal of Sensor Science and Technology
• /
• v.20 no.4
• /
• pp.249-253
• /
• 2011

This paper describes the fabrication and characteristics of vibration-driven electromagnetic energy harvester without spring to use at low frequency like a human body motion. The implemented energy harvester consists of NdFeB magnets, copper coil. The optimization of induced voltage was done by the various widths of coil, number of the turns, size of fixed and moving magnets and thicknesses of the cylinder. The fabricated energy harvester is capable of producing up to 15.0 $V_{pp}$ for basic model and 28.80 $V_{pp}$ for improved model at 5.0 Hz resonance frequency and 0.75 g acceleration level. The basic model and improved model are provided a maximum power of 6.375 mWand 25.831 mW at 1 KHz of load resistance in rectifier circuit.

• Journal of Environmental Science International
• /
• v.31 no.9
• /
• pp.757-766
• /
• 2022

This study is to examine how well the hydrologic model reproduces the dam collapse. To do this, A hydrologic model FLO-2D is being operated to reproduce dam collapse with rainfall data and surface data in a small dam. In order to examine the performance of the model, the simulation was compared and reviewed with the data collected through the field survey. The results show that it takes about 2 hours to reach 1 km downstream. Inundation areas are about 188,640 m2 by the simulation and the difference from the field investigation is about 6.1%. Ten representative points were selected from the areas where the simulation and the field survey did not match. The discrepancy is less than about 0.08 m and does not appear to be significant. This study will present basic information on disaster preparedness operation and planning to minimize damage caused by sudden collapse of agricultural soil dams in the future.

• Advances in Traditional Medicine
• /
• v.8 no.4
• /
• pp.354-364
• /
• 2008

The present study was carried out to investigate the antihypertensive effect of a folklore herbal formulation (HF) (300mg/kg/day; p.o.) in deoxycorticosterone acetate (DOCA)-salt induced and fructose induced hypertensive rats. In DOCA model, DOCA (15 mg/kg, s.c., twice a week) was administered to unilateral nephrectomized rats for 4 weeks. In fructose model, drinking water was replaced with 10% fructose solution for 6 weeks to induce hypertension. Systolic blood pressure (BP) was measured once every week during the treatment schedule. After completion of treatment schedule, BP and vascular reactivity to various agonists like Noradrenaline, Adrenaline, Phenylephrine and Serotonin (5-hydroxytrptamine; 5-HT) were recorded in rats of both models. A cumulative concentration response curve of 5-HT was carried out in isolated rat fundus strip of the DOCA-salt induced and fructose induced hypertensive rats. The results tend to suggest that HF possesses antihypertensive activity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.1
• /
• pp.9-17
• /
• 2001

In this study, flow boiling experiments were performed using R-134a on a plain tube bundle. Tests were conducted for the following range of variables; quality from 0.1 to 0.9, mass flux from $8\;kg/m^2s$ to $26\;kg/m^2s$ and heat flux from $10\;kW/m^2s$ to $40\;kW/m^2s$. The heat transfer coefficients were strongly dependent on the heat flux. However, they were almost independent on the mass flux or quality. The data are compared with the modified Chen model, which satisfactorily () predicted the data. Original Chen model, however, did not adequately predict the effect of quality. The reason may be attributed to the flow pattern of the present test, where the bubbly flow prevailed for the entire test range. The heat transfer coefficients of the tube bundle were 6~40% higher than those of the single tube pool boiling.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.31-39
• /
• 2004

In this paper, an experimental study on the hydroelastic behaviors of a VLFS with L=5,000m was made considering a breakwater. The principal dimensions of the VLFS model were 9m${\times}$1.8${\times}$0.0108m(L${\times}$B${\times}$D) and the length of breakwater was 12.6m (1.4L). The distance between the VLFS and the breakwater varied from B/2 to 28. The wide tank test results were compared with the numerical predictions and the comparison showed a little gap along its longitudinal axis, in spite of using the very small model size due to the scale 1/555.5

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1731-1738
• /
• 2021

The objective of this study was to extract individual trees and tree heights using UAV drone images. The study site was Gongju national university experiment forest, located in Yesan-gun, Chungcheongnam-do. The thinning intensity study sites consisted of 40% thinning, 20% thinning, 10% thinning and control. The image was filmed by using the "Mavic Pro 2" model of DJI company, and the altitude of the photo shoot was set at 80% of the overlay between 180m pictures. In order to prevent image distortion, a ground reference point was installed and the end lap and side lap were set to 80%. Tree heights were extracted using Digital Surface Model (DSM) and Digital Terrain Model (DTM), and individual trees were split and extracted using object-based analysis. As a result of individual tree extraction, thinning 40% stands showed the highest extraction rate of 109.1%, while thinning 20% showed 87.1%, thinning 10% showed 63.5%, and control sites showed 56.0% of accuracy. As a result of tree height extraction, thinning 40% showed 1.43m error compared with field survey data, while thinning 20% showed 1.73 m, thinning 10% showed 1.88 m, and control sites showed the largest error of 2.22 m.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.591-607
• /
• 2013

The objectives of the study were to evaluate the aquatic environment of an urban stream using various ecological parameters of biological biomarkers, physical habitat quality and chemical water quality and to develop a "Multimetric Eco-Model" ($M_m$-E Model) for the ecosystem evaluations. For the applications of the $M_m$-E model, three zones including the control zone ($C_Z$) of headwaters, transition zone ($T_Z$) of mid-stream and the impacted zone ($I_Z$) of downstream were designated and analyzed the seasonal variations of the model values. The biomarkers of DNA, based on the comet assay approach of single-cell gel electrophoresis (SCGE), were analyzed using the blood samples of Zacco platypus as a target species, and the parameters were used tail moment, tail DNA(%) and tail length (${\mu}m$) in the bioassay. The damages of DNA were evident in the impacted zone, but not in the control zone. The condition factor ($C_F$) as key indicators of the population evaluation indicator was analyzed along with the weight-length relation and individual abnormality. The four metrics of Qualitative Habitat Evaluation Index (QHEI) were added for the evaluations of physical habitat. In addition, the parameters of chemical water quality were used as eutrophic indicators of nitrogen (N) and phosphorus (P), chemical oxygen demand (COD) and conductivity. Overall, our results suggested that attributes of biomarkers and bioindicators in the impacted zone ($I_Z$) had sensitive response largely to the chemical stress (eutrophic indicators) and also partially to physical habitat quality, compared to the those in the control zone.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.6
• /
• pp.1585-1594
• /
• 2018

In recent years The importance of information security management for securing information collection and analysis, production and distribution is increasing. Companies are assured of confidence in information security through authentication of information Security Management System. However, level assessment and use of domains that make up the management system is limited. On the other hand, the security maturity model is able to diagnose the level of information protection of the enterprise step by step. It is also possible to judge the area to be improved urgently. It is a tool to support goal setting according to the characteristics and level of company. In this paper, C2M2, which is an example of security maturity model, is compared and analyzed with Korea Information Security Management System certification. Benchmark the model to check the level of information security management and derive the priority among the items that constitute the detailed area of information security measures of ISMS certification. It also look at ways to check the level of information security management step by step.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.85-95
• /
• 2017

This study aims to identify the throw distance in terms of truck weight, bumper height, and speed in a truck and pedestrian collision, and to propose a model for throw distance estimates. For this purpose, a simulation analysis is performed using the PC-crash program with the following experiment conditions: Truck weight of 5t, 15t, and 25t, Bumper height from 0.3m to 0.6m by 0.1m, and speed from 10km/h to 100km/h by 10 km/h. Experimental results show that the truck speed and bumper height are found to be significant factors for pedestrian throw distance, but truck weight is not a significant factor. Also, a regression model is developed for pedestrian throw distance estimate from the multiple regression analysis. The adjusted $R^2$ value of the model is 93.3%, which is very good explanatory power.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.311-324
• /
• 2023

As an advanced study on the method of calculating the target revenue water ratio of local waterworks through the leakage component analysis method proposed by Kim et al. (2022), this study developed a model to calculate the achievable revenue water ratio within the specified project cost, the required project cost to achieve the specified target revenue water ratio, and the economically appropriate target revenue water ratio level by considering the leakage reduction cost and leakage reduction benefit for each revenue water ratio improvement strategy, and conducted an applicability evaluation of the developed model using actual field data. The procedure for calculating the target revenue water ratio of local waterworks considering economics proposed in this study consists of three stages: physical data linkage model construction, leakage component analysis, and economic analysis, and the applicability was evaluated for Zone H with branch type and the Zone M network type. As a result of the application, it was calculated that approximately 32.5 billion won would be required to achieve the target revenue water ratio of 70% in the Zone H, and approximately KRW 10.5 billion would be required to achieve the target revenue water ratio of 75% in the Zone M. If the business scale of Zones H and M was corrected to 10,000 m³/day of water usage, the required project cost for a 1% improvement in the revenue water ratio of Zone H was calculated to be 0.7642 billion won and 0.4715 billion won for Zone M.