• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1189-1193
• /
• 2010

Mobility management is one of the most important research issues in 6LoWPAN, Since the IP-WSN application domain is expanded to real-time applications such as healthcare and surveillance systems, a fast and seamless handover becomes an important criterion in 6LoWPAN. However, a draft of IETF 6LoWPAN WG for mobility support does not decrease handover delay. Although LoWMob supports a fast intra-PAN handover. it can be supported when the infrastructure node has the location information of the other nodes in the mobile node's moving direction. In this paper, we propose a fast and seamless mobility protocol to support intra-PAN handover, named intra-MARIO. In intra-MARIO, a parent node of the mobile node preconfigures its handover to the PAN when the parent node detects its movement, thereby reducing the handover delay. Since intra-MARIO also supports route optimization, the mobile node can communicate with its corresponding nodes through the optimal route. In this paper, we analysis the signaling cost and evaluates that the handover can be completed in 20ms by simulation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.744-747
• /
• 2011

센서 네트워크는 다수의 센서노드를 통해 특정한 요청에 대한 정보를 수집하고 공유하는 네트워크이다. 센서 네트워크에는 많은 수의 센서들이 존재하기 때문에 센서노드를 관리하고 모니터링 하기 위한 효율적인 방법이 필요하다. 센서 네트워크에 IPv6를 적용한 기술로써 6LoWPAN이 있다. SNMP 사용 등 IP를 이용함으로 얻을 수 있는 다양한 장점이 있지만 센서의 배터리 용량과 메시지 사이즈가 제한적이기 때문에 메시지 사이즈가 큰 기존의 SNMP를 그대로 적용하기는 어렵다. 따라서 센서 네트워크에서 제한된 배터리 용량과 메시지 사이즈에 적용할 수 있는 효율적인 네트워크 기법이 필요하다. 본 논문에서는 네트워크 관리 프로토콜인 SNMP를 경량화 하여 6LoWPAN 환경에서도 적합한 방안을 제안하였다. 특히, SNMP 버전 중 SNMPv1, v2보다 보안성이 강화된 SNMPv3을 경량화 하여 6LoWPAN에 적합하고 보안적인 네트워크 관리를 위한 기법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.687-699
• /
• 2013

IP-based IP-USN overcomes that disadvantages of verify the existence and geographic limits of the sensor by applying a standard technique called 6LoWPAN. However, in terms of the management and cost, The USN node should work for a long period of time without periodic batter replacement. but this solution is insufficient.In this paper, we configure the node using TI's CC2530 that low-power Soc solution and Contiki OS for optimal low-power operation IP-USN and implement the gateway to support connecting IP networks and Sensor networks. In addition, a system implemented to measure and analyze the energy consumption of an independent power supply to look for ways.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.59-64
• /
• 2016

6LoWPAN (IPv6 over Low Power Wireless Sensor Network) standardized by IETF does not support the mobility of wireless sensor nodes. Since the wireless sensor node, subject to a lot of constraints in the CPU, memory, a battery is not easy to apply to existing protocols such as Mobile IPv6. In this paper, we propose a novel mobility management architecture and methods to work with 6LoWPAN based on the analysis on FPMIPv6 (Fast PMIPv6) the host is not a handover procedure performed in order to support the mobility of such sensor nodes. It was suggested the use of a dispatch code pattern that is not currently used in 6LoWPAN for inter-working, MAG and MAC, MAC in order to reduce packet loss caused as the authentication delay in the handover process to minimize the power consumption of a sensor node that is caused by the re-transmission the new concept of temporary guarantee (temporary guarantee) and trust relationships (trust relationship) between AAA and introduced.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1561-1569
• /
• 2016

As the use of the sensor device increases in IoT environment, the need for device security is becoming more and more important When a sensor device is deployed in IEEE 802.15.4-based LoWPAN, it has to perform the join operation with PAN Coordinator and the binding operation with another device. In the join and binding process, authentication and key distribution of the device are performed using the pre-distributed network key or certificate. However, the network key used in the conventional method has problems that it's role is limited to the group authentication and individual identification is not applied in certificate issuing. In this paper, we propose a secure join and binding protocol in LoWPAN environment that solves the problems of pre-distributed network key.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.1
• /
• pp.1-14
• /
• 2010

It is recently issued scalability, mobility and external internet connection on Wire-less sensor network. The low power wireless sensor networks based on IPv6 technology 6LoWPAN technology is being standardized in the IETF. This paper for the 6LoWPAN environment based on the routing protocol LOAD, route cost applied the packet re-transmission rate which follows in Link Qualities price which uses at course expense and packet transmission Minimum route Cost routing protocol where does on the course wherethe smallest packet re-transmission becomes accomplished proposed. The technique which proposes compared and LOAD and AODV that about 13%, about 16% energy consumption is few respectively averagely, Energy of the entire network equally, used and energy effectiveness and improvement of network life time experiment led and confirmed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.53-61
• /
• 2018

Recently, technologies related to the Internet of Things have developed rapidly and research on mobile environment home network systems is actively in progress. The Internet Engineering Task Force (IETF) Working Group proposed the CoAP/6LoWPAN technology as a suitable protocol for internetworking IoT devices with the Internet in a limited environment and adopting it as a standard. However, the existing home network systems hardly include security protocols. IETF recommends DTLS(Datagram Transport Layer Security) on UDP as security protocol suitable for IoT environments. In this paper, smart home network system based on CoAP/6LoWPAN by using DTLS is implemented in mobile environments. The data transfer time is measured according to each procedure of the DTLS protocol and the need to improve DTLS protocol is suggested.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.274-280
• /
• 2011

Due to their rapid growth and new paradigm applications, wireless sensor networks(WSNs) are morphing into low power personal area networks(LoWPANs), which are envisioned to grow radically. The fragmentation and reassembly of IP data packet is one of the most important function in the 6LoWPAN based communication between Internet and wireless sensor network. However, since the 6LoWPAN data unit size is 102 byte for IPv6 MTU size is 1200 byte, it increases the number of fragmentation and reassembly. In order to reduce the number of fragmentation and reassembly, this paper presents a new scheme that can be applicable to 6LoWPAN. When a fragmented packet header is constructed, we can have more space for data. This is because we use 8-bits routing table ill instead of 16-bits or 54-bits MAC address to decide the destination node. Analysis shows that our design has roughly 7% or 22% less transmission number of fragmented packets, depending on MAC address size(16-bits or 54-bits), compared with the previously proposed scheme in RFC4944. The reduced fragmented packet transmission means a low power consumption since the packet transmission is the very high power function in wireless sensor networks. Therefore the presented fragmented transmission scheme is well suited for low-power wireless sensor networks.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.45-50
• /
• 2008

Many applications of sensor network require connection to the Internet. The transmission protocol of traditional sensor network was designed within the sensor network itself. However, based on 6LoWPAN which can be accessed using IPv6, direct connection is possible between the sensor network and the TCP/IP network outside. Transmission of data in applications of sensor network falls into two main categories. One is a small packet that is periodically produced such as packet related to temperature and humidity. The other is a relatively large packet that brings about network overheads such as images. We investigated the conformance test and pros and cons of application data over the transmission protocol of Zigbee and 6LoWPAN. As a result, both Zigbee and 6LoWPAN have shown low rate of loss for periodic data and have in creased reliability of data transfer. When transmitting streaming image data, both ACK, non ACK mode of Zigbee and UDP of 6LoWPAN minimized transmission time but suffered the consequences of high packet loss. Even though TCP of 6LoWPAN required a long transmission time, we were able to confirm that no loss has occurred.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.296-305
• /
• 2007

The HiLow, a hierarchical routing protocol for 6LoWPAN, needs smaller memory allocation and energy than other routing protocols. However, the HiLow has a weak point that does not provide the optimized routing path. In this paper, we propose the algorithm that can find the optimum next hop using neighboring nodes around the source node as well as hierarchical routing path information. We evaluate the performance of proposed algorithm using the computer simulation, and we can acquire results that decreases a number of hop count and transmitted message.