• The Journal of Engineering Geology
• /
• v.15 no.4 s.42
• /
• pp.391-405
• /
• 2005

Chemical and isotopic analysis for stream water, shallow groundwater, intermediate groundwater and deep groundwater was carried out to grasp hydrogeochemical characteristics of groundwater in the Heunghae area, Pohang city. Water type of stream water and shallow groundwaters is typified as Ca-Cl type, intermediate groundwater is $Na-HCO_3$, and deep groundwater is prominent in Wa-Cl type. $HCO_3^-\;and\;SiO_2$ in shallow groundwater are originated from weathering of silicate minerals, whereas those of deep groundwaters are resulted from weathering of carbonate minerals. Ca and Mg ions in both shallow and deep groundwaters are resulted from weathering of calcite and dolomite. $SO_4^{2-}$ in shallow groundwater is originated mainly from pyrite oxidation. As well depth increases, pH and TDS increase, but Eh and DO decrease. Alkali metal contents(K, Na, Li) increases as well depth increases, but alkali earth metal(Mg, Ca) and hi concentrations increase as well depth decreases. Anions, halogen elements(F, Cl, Br), and $HCO_3$ contents increase as well depth increases. The average stable isotope value of the groundwater of each depth is as follows; deep groundwater: ${\delta}^{18}O=-10.1\%o,\;{\delta}D=-65.8\%_{\circ}$, intermediate groundwater: ${\delta}^{18}O=-8.9\%_{\circ},\;{\delta}D=-59.6\%_{\circ}$, shallow groungwater : ${\delta}^{18}O=-8.0\%_{\circ},\;{\delta}D=-53.6\%_{\circ}$, surface water : ${\delta}^{18}O=-7.9\%_{\circ},\;{\delta}D=-53.3\%_{\circ}$ respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.3
• /
• pp.259-268
• /
• 2022

Molten salt consisting primarily of eutectic LiCl-KCl is currently being used in electrorefiners in the Fuel Conditioning Facility at Idaho National Laboratory. Options are currently being evaluated for storing this salt outside of the argon atmosphere hot cell. The hygroscopic nature of eutectic LiCl-KCl makes is susceptible to deliquescence in air followed by extreme corrosion of metallic cannisters. In this study, the effect of occluding the salt into a zeolite on water sorption/desorption was tested. Two zeolites were investigated: Na-Y and zeolite 4A. Na-Y was ineffective at occluding a high percentage of the salt at either 10 or 20wt% loading. Zeolite-4A was effective at occluding the salt with high efficiency at both loading levels. Weight gain in salt occluded zeolite-4A (SOZ) from water sorption at 20% relative humidity and 40℃ was 17wt% for 10% SOZ and 10wt% for 20% SOZ. In both cases, neither deliquescence nor corrosion occurred over a period of 31 days. After hydration, most of the water could be driven off by heating the hydrated salt occluded zeolite to 530℃. However, some HCl forms during dehydration due to salt hydrolysis. Over a wide range of temperatures (320-700℃) and ramp rates (5, 10, and 20℃ min^-1), HCl formation was no more than 0.6% of the Cl^- in the original salt.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.780-783
• /
• 2002

We report very efficient white OLEDs consisting of a blue-emitting 4,4'bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl (${\alpha}$-NPD), a hole-blocking layer of 2,9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline (BCP) doped with red fluorescent dye of 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro- 1H, 5H-benzo[i,j]quinolizin-8-yl) vinyl]-4H-pyran) (DCM2), and green-emitting tris(8-hydroxyquinoline) aluminum ($Alq_3$). The device with the structure of ITO/${\alpha}$-NPD (50 nm)/BCP:DCM2 (0.8 %, 4 nm)/$Alq_3$ (50 nm)/LiF (0.5 nm)/Al shows a white emission with the CIE coordinates (0.329, 0.333). The maximum luminance of 20,800 cd/$m^2$ is obtained at 15.4 V. The power efficiency is 2.6lm/W and the external quantum efficiency is 2.1 % at a luminance of 100 cd/$m^2$ at the bias voltage of 6 V.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1184-1191
• /
• 2011

We attempted to generate a linkage map using Illumina Porcine 60K SNP Beadchip genotypes of the $F_2$ offspring from Korean native pig (KNP) crossed with Yorkshire (YS) pig, and to identify quantitative trait loci (QTL) using the line-cross model. Among the genotype information of the 62,136 SNPs obtained from the high-density SNP analysis, 45,308 SNPs were used to select informative markers with allelic frequencies >0.7 between the KNP (n = 16) and YS (n = 8) F0 animals. Of the selected SNP markers, a final set of 500 SNPs with polymorphic information contents (PIC) values of >0.300 in the $F_2$ groups (n = 252) was used for detection of thirty meat quality-related QTL on chromosomes at the 5% significance level and 10 QTL at the 1% significance level. The QTL for crude protein were detected on SSC2, SSC3, SSC6, SSC9 and SSC12; for intramuscular fat and marbling on SSC2, SSC8, SSC12, SSC14 and SSC18; meat color measurements on SSC1, SSC3, SSC4, SSC5, SSC6, SSC10, SSC11, SSC12, SSC16 and SSC18; water content related measurements in pork were detected on SSC4, SSC6, SSC7, SSC10, SSC12 and SSC14. Additional QTL of pork quality traits such as texture, tenderness and pH were detected on SSC6, SSC12, SSC13 and SSC16. The most important chromosomal region of superior pork quality in KNP compared to YS was identified on SSC12. Our results demonstrated that a QTL linkage map of the $F_2$ design in the pig breed can be generated with a selected data set of high density SNP genotypes. The QTL regions detected in this study will provide useful information for identifying genetic factors related to better pork quality in KNP.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.819-826
• /
• 2009

An in vitro study was conducted to investigate the effect of malate or fumarate on fermentation characteristics, and production of conjugated linoleic acid (CLA) and methane ($CH_4$) by rumen microbes when incubated with linolenic acid (${\alpha}-C_{18:3}$). Sixty milligrams of ${\alpha}-C_{18:3}$ alone (LNA), or ${\alpha}-C_{18:3}$ with 24 mM malic acid (M-LNA) or ${\alpha}-C_{18:3}$ with 24 mM fumaric acid (F-LNA) were added to the 150 ml culture solution consisting of 75 ml strained rumen fluid and 75ml McDougall's artificial saliva. Culture solution for incubation was also made without malate, fumarate and ${\alpha}-C_{18:3}$ (Control). Two grams of feed consisting of 70% concentrate and 30% ground alfalfa (DM basis) were also added to the culture solution of each treatment. In vitro incubation was made anaerobically in a shaking incubator up to 12 h at $39^{\circ}C$. Supplementation of malate (M-LNA) or fumarate (F-LNA) increased pH at 6 h (p<0.01) and 12 h (p<0.001) incubation times compared to control and linolenic acid (LNA) treatments. Both malate and fumarate did not influence the ammonia-N concentration. Concentration of total VFA in culture solution was higher for M-LNA and F-LNA supplementation than for control and LNA treatments from 6 h (p<0.040) to 12 h (p<0.027) incubation times, but was not different between malate and fumarate for all incubation times. Molar proportion of $C_3$ was increased by F-LNA and M-LNA supplementation from 6 h (p<0.0001) to 12 h (p<0.004) incubation times compared to control and LNA treatments. No differences in $C_{3}$ proportion, however, were observed between M-LNA and F-LNA treatments. Accumulated total gas production for 12h incubation was increased (p<0.0002) by M-LNA or F-LNA compared to control or LNA treatment. Accumulated $CH_4$ production for 12 h incubation, however, was greatly reduced (p<0.0002) by supplementing malate or fumarate compared to the control, and its production from M-LNA or F-LNA treatment was smaller than that from LNA treatment. Methane production from LNA, M-LNA or F-LNA treatment was steadily lower (p<0.01 - p<0.001) from 3 h incubation time than that from the control, and was also lower for M-LNA or F-LNA treatment at incubation times of 6 h (p<0.01) and 9 h (p<0.001) than for LNA treatment. Methane production from LNA, however, was reduced (p<0.01 - p<0.001) from 3 h to 9 h incubation times compared to the control. Both malate and fumarate increased concentration of trans11-$C_{18:1}$ from 3 h to 12 h incubation (p<0.01), cis9,trans11-CLA up to 6 h incubation (p<0.01 - p<0.01), trans10,cis12-CLA at 3 h (p<0.05) and 12 h (p<0.01), and total CLA for all incubation times (p<0.05) compared to corresponding values for the ${\alpha}-C_{18:3}$ supplemented treatment (LNA). In conclusion, malate and fumarate rechanneled the metabolic $H_2 pathway to production of propionate and CLA, and depressed the process of biohydrogenation and methane generation. Linolenic acid alone would also be one of the optimistic alternatives to suppress the $CH_4$ generation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1651-1654
• /
• 2007

The mouse myxovirus resistance protein 1 (Mx1) is known to be sufficient to confer resistance to influenza viruses, and the gene encoding Mx1 is, therefore, an interesting candidate gene for disease resistance in farm animals. The porcine Mx1 gene has already been identified and characterized based on its homology with mouse Mx1; the full-length coding region of the pig Mx1 gene spans 2,545 bp (M65087) and is organized into 17 exons compared with the human ortholog mRNA. In this study, the exons 9, 10 and 11 and introns 6 and 9 of the porcine Mx1 gene were cloned and sequenced. Two SNPs were identified in exons 9, 10 and 11 but none of the SNPs led to an amino acid exchange, and the other eleven variants were detected in introns 6 and 9, respectively. Differences in allele frequency between Meishan and other pig breeds were observed within intron 6, of which an $A{\rightarrow}G$ substitution at position 371 was detected as an SnaBI PCR-RFLP. The association analysis using the Large White${\times}$Meishan $F_2$ offspring suggested that the Mx1 genotype was associated with variation in several immunity traits that are of interest in pig breeding. However, further investigations in more populations are needed to confirm the above result.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2361-2366
• /
• 2014

A new aliphatic acid amide, ZP-amide F (1), and eight known compounds, including bungeanumamide A (2), tumuramide C (3), ZP-amide A (4), ZP-amide B (5), ZP-amide D (6), hyperin (7), quercitrin (8), and (-)-sesamin (9), were isolated from pericarps of Zanthoxylum piperitum. The effects of these compounds on $TNF{\alpha}$-induced NF-${\kappa}B$ activation and transactivational activity of PPARs, including $PPAR{\alpha}$, $PPAR{\beta}({\delta})$ and $PPAR{\gamma}$ subtypes, were evaluated. Compounds 7 and 9 exhibited potent inhibitory effects on $TNF{\alpha}$-induced NF-${\kappa}B$ activation with $IC_{50}$ values of 5.50 and $8.10{\mu}M$, respectively. Aliphatic acid amide compounds 3, 4 and 6 displayed enhanced effects on PPAR transactivational activity with $EC_{50}$ values of 47.12, 19.13 and $12.02{\mu}M$, respectively. Among them, compound 4 demonstrated an increase in $PPAR{\alpha}$ transactivational activity, compound 3 showed a moderate increase on all PPAR subtypes, whereas compound 6 displayed weak PPAR transactivational activity.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2438-2442
• /
• 2014

A kinetic study is reported for $S_NAr$ reaction of 1-fluoro-2,4-dinitrobenzene (5a) and 1-chloro-2,4-dinitrobenzene (5b) with alkali-metal ethoxides (EtOM, M = Li, Na, K and 18-crown-6-ether complexed K) in anhydrous ethanol. The second-order rate constant increases in the order $k_{EtOLi}$ < $k_{EtO^-}$ < $k_{EtONa}$ < $k_{EtOK}$ < $k_{EtOK/18C6}$ for the reaction of 5a and $k_{EtOLi}$ < $k_{EtONa}$ < $k_{EtO^-$ < $k_{EtOK}$ < $k_{EtOK/18C6}$ for that of 5b. This indicates that $M^+$ ion behaves as a catalyst or an inhibitor depending on the size of $M^+$ ion and the nature of the leaving group ($F^-$ vs. $Cl^-$). Substrate 5a is more reactive than 5b, although the $F^-$ in 5a is ca. $10pK_a$ units more basic than the $Cl^-$ in 5b, indicating that the reaction proceeds through a Meisenheimer complex in which expulsion of the leaving group occurs after the rate-determining step (RDS). $M^+$ ion would catalyze the reaction by increasing either the nucleofugality of the leaving group through a four-membered cyclic transition state or the electrophilicity of the reaction center through a ${\pi}$-complex. However, the enhanced nucleofugality would be ineffective for the current reaction, since expulsion of the leaving group occurs after the RDS. Thus, it has been concluded that $M^+$ ion catalyzes the reaction by increasing the electrophilicity of the reaction center through a ${\pi}$-complex between $M^+$ ion and the ${\pi}$-electrons in the benzene ring.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.145-149
• /
• 2016

The effect of process parameters such as plasma composition, ICP (Inductively Coupled Plasma) source power and rf chuck power on the etch characteristics of GaN epitaxy layer was studied. $Cl_2/Ar$ ICP discharges showed higher etch rates than $SF_6/Ar$ discharges because of the higher volatility of $GaCl_x$ etch products than $GaF_x$ compounds. As the Ar ratio increases in the $Cl_2/Ar$ ICP discharges, the etch anisotropy was enhanced due to the improved physical component of the etching. For both plasma chemistries, the GaN etch rate increased continuously as both the ICP source power and rf chuck power increased, and a maximum etch rate of 251.9 nm/min was obtained at $13Cl_2/2Ar$, 750W ICP power, 400W rf chuck power and 10 mTorr condition.