• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.511-521
• /
• 2018

Proportional capacitor current feedback active damping (CCFAD) has a limited valid damping region in the discrete time domain as (0, $f_s/6$. However, the resonance frequency ($f_r$) of an LCL-type filter is usually designed to be less than half the sampling frequency ($f_s$) with the symmetry regular sampling method. Therefore, ($f_s/6$, $f_s/2$) becomes an invalid damping region. This paper proposes an improved CCFAD method to extend the valid damping region from (0, $f_s/6$ to (0, $f_s/2$), which covers all of the possible resonance frequencies in the design procedure. The full-valid damping region is obtained and the stability margin of the system is analyzed in the discrete time domain with the Nyquist criterion. Results show that the system can operate stably with the proposed CCFAD method when the resonance frequency is in the region (0, $f_s/2$). The performances at the steady and dynamic state are enhanced by the selected feedback coefficient H and controller gain $K_p$. Finally, the feasibility and effectiveness of the proposed CCFAD method are verified by simulation and experimental results.

• Journal of Veterinary Science
• /
• 제23권1호
• /
• pp.7.1-7.14
• /
• 2022

Background: Enterotoxigenic Escherichia coli (ETEC) infection is a primary cause of livestock diarrhea. Therefore, effective vaccines are needed to reduce the incidence of ETEC infection. Objectives: Our study aimed to develop a multivalent ETEC vaccine targeting major virulence factors of ETEC, including enterotoxins and fimbriae. Methods: SLS (STa-LTB-STb) recombinant enterotoxin and fimbriae proteins (F4, F5, F6, F18, and F41) were prepared to develop a multivalent vaccine. A total of 65 mice were immunized subcutaneously by vaccines and phosphate-buffered saline (PBS). The levels of specific immunoglobulin G (IgG) and pro-inflammatory cytokines were determined at 0, 7, 14 and 21 days post-vaccination (dpv). A challenge test with a lethal dose of ETEC was performed, and the survival rate of the mice in each group was recorded. Feces and intestine washes were collected to measure the concentrations of secretory immunoglobulin A (sIgA). Results: Anti-SLS and anti-fimbriae-specific IgG in serums of antigen-vaccinated mice were significantly higher than those of the control group. Immunization with the SLS enterotoxin and multivalent vaccine increased interleukin-1β (IL-1β) and tumor necrosis factor-α (TNF-α) concentrations. Compared to diarrheal symptoms and 100% death of mice in the control group, mice inoculated with the multivalent vaccine showed an 80% survival rate without any symptom of diarrhea, while SLS and fimbriae vaccinated groups showed 60 and 70% survival rates, respectively. Conclusions: Both SLS and fimbriae proteins can serve as vaccine antigens, and the combination of these two antigens can elicit stronger immune responses. The results suggest that the multivalent vaccine can be successfully used for preventing ETEC in important livestock.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.173-178
• /
• 2013

We present six-degree-of-freedom (6DoF) haptic rendering algorithms using translational ($PD_t$) and generalized penetration depth ($PD_g$). Our rendering algorithm can handle any type of object/object haptic interaction using penalty-based response and makes no assumption about the underlying geometry and topology. Moreover, our rendering algorithm can effectively deal with multiple contacts. Our penetration depth algorithms for $PD_t$ and $PD_g$ are based on a contact-space projection technique combined with iterative, local optimization on the contact-space. We circumvent the local minima problem, imposed by the local optimization, using motion coherence present in the haptic simulation. Our experimental results show that our methods can produce high-fidelity force feedback for general polygonal models consisting of tens of thousands of triangles at near-haptic rates, and are successfully integrated into an off-the-shelf 6DoF haptic device. We also discuss the benefits of using different formulations of penetration depth in the context of 6DoF haptics.

• Natural Product Sciences
• /
• 제22권3호
• /
• pp.154-161
• /
• 2016

Phytochemical investigation on the leaves of Pileostegia viburnoides Hook.f.et Thoms led to the isolation of twenty-five compounds, and their structures were identified as n-dotriacontane (1), taraxeryl acetate (2), friedelin (3), epifriedelinol (4), canophyllal (5), stigmast-4-en-3-one (6), stigmasterol (7), (24R)-5A-stigmastane-3,6-dione (8), ursolic acid (9), pomolic acid (10), umbelliferone (11), 4-epifriedelin (12), n-octatriacontanol (13), ${\beta}$-amyrin (14), ${\alpha}$-amyrin (15), taraxerol (16), nonadecanol (17), friedelane (18), arachic acid (19), protocatechuic acid (20), n-pentatriacontanol (21), hexadecanoic acid (22), vincosamide (23), daucosterol (24), and skimming (25), respectively. To our best knowledge, compounds 1, 2, 12, 13, 17 - 19 and 21-23 were new within Saxifragaceae family. Compounds 15, 16, and 20 were produced from this genus for the first time. Compounds 4, 14 and 25 were first obtained from species P. viburnoides and compounds 3, 5 - 11, and 24 were achieved from the leaves of P. viburnoides for the first time. Furthermore, the anti-neuroinflammatory activity of these isolates was evaluated.

• 마이크로전자및패키징학회지
• /
• 제28권3호
• /
• pp.17-24
• /
• 2021

페로브스카이트 태양전지는 용액공정으로 제작되어 공정 중 전구체 조성제어를 통해 밴드갭을 용이하게 조절할 수 있다. 탠덤 태양전지의 상부셀로 활용하여 실리콘 태양전지와 접합 시 30% 이상의 효율 달성이 가능하지만, 페로브스카이트 태양전지의 낮은 안정성이 상용화의 걸림돌로 작용하고 있다. 아이오딘 이온 및 전극 물질 확산이 주된 열화기구로 알려져 있어 장기 안정성을 확보하기 위해서는 이러한 이온 이동의 방지가 필요하다. 본 연구에서는 층간소재와 페로브스카이트 광활성층 사이의 이온이동에 의한 열화현상을 관찰하고, 이를 억제하기 위해 페로브스카이트 소재와 은전극 사이에 버퍼층을 도입하여 소자의 안정성을 확보하였다. 85℃에서 300시간 이상 보관 시 버퍼가 없는 소자는 페로브스카이트 층이 PbI₂ 및 델타상으로 변화하며 변색되었으며 AgI가 형성되는 것을 확인했다. LiF와 SnO₂ 버퍼 도입 시 이온이동 억제 효과를 통해 페로브스카이트 태양전지의 열안정성이 향상되었다. LiF버퍼층 적용 및 봉지를 한 소자는 85℃-85%RH damp heat 시험 200시간 후 효율감소가 발생하지 않았으며 추가로 AM 1.5G-1SUN 하에서 최대출력점을 추적하였을 때 200시간 후 초기 효율의 90% 이상 유지하는 것을 확인했다. 이 결과는 버퍼층 형성을 통한 층간 물질이동 억제가 장기안정성을 확보하기 위한 필요조건임을 보여준다.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.42-47
• /
• 2000

The amorphous vanadium oxide thin films for thin-film rechargeable lithium batteries were fabricated by r.f. reactive sputtering at room temperature. As the experimental parameter, oxygen partial pressure was varied during sputtering. At high oxygen partial pressures(>30%), the as-deposited films, constant current charge/discharge characteristics were carried out in 1M $LiPF_6$, EC:DMC+1:1 liquid electrolyte using lithium metal as anode. The specific capacity of amorphous $V_2O_5$ after 200cycles of operation at room temperature was higher compared to crystalline $V_2O_5$. The amorphous vanadium oxide thin film and crystalline film showed about 60$\mu$Ah/$\textrm{cm}^2\mu\textrm{m}$ and about 38$\mu$Ah/$\textrm{cm}^2\mu\textrm{m}$, respectively. These results suggest that the battery capacity of the thin film vanadium oxide cathode strongly depends on the crystallinity.

• 약학회지
• /
• 제52권6호
• /
• pp.488-493
• /
• 2008

2-Aminothiazole ring as a bioisoster of catechol in dopamine has provided with good oral availability and lipophilic property. 2-Aminoindan, is a rigid form of dopamine, was evaluated as a dopamine D3 agonist with low neurotoxicity. Dopamine D3 agonist was evaluated as selective for the treatment of Parkinson's disease. In order to develop a novel dopamine D3 agonist, we tried to synthesize the aminothiazoloindenoxazine derivative that is a hybrid structure of aminoindenoxazine and thiazole ring. cis-2-Amino-1-indanol (2) was synthesized from 1,2-indandione-2-oxime by catalytic hydrogenation and it was treated with chloroacetyl chloride and NaH in benzene solution to give (${\pm}$)-cis-4,4a,5,9b-tetrahydroindeno[1,2-b][1,4]oxazin-3(2H)-one (6). Nitration of 6 by the mixed acid gave 8-nitro compound (7) and the carbonyl group of 7 was reduced with $LiAlH_4$ to afford compound (8). 8 was reduced to form (${\pm}$)-cis-8-amino-2,3,4,4a,5,9b-hexahydroindeno[1,2-b][1,4]oxazine (9) and finally it was cyclized with KSCN in glacial acetic acid to yield (${\pm}$)-cis-8-amino-2,3,4,4a,5,10b-hexahydrothiazolo[4,5-f]indeno[1,2-b][1,4]oxazine (10).

• 한국광물학회지
• /
• 제16권3호
• /
• pp.223-232
• /
• 2003

리튬2차전지용 양극소재 개발을 위해 Li[L $i_{x}$M $n_{1-x-y}$C $r_{y}$ ] $O_2$를 공침법(co-p.ecipitation method)을 적용하여 각각 $650^{\circ}C$(CR650)와 8$50^{\circ}C$(CR850)에서 합성하였다. 리트벨트 구조분석 결과 계산의 정밀도를 나타내는 R 지수값을 보면 $R_{exp}$에 대한 $R_{wp}$값( $R_{wp}$/ $R_{exp}$)은 CR650과 CR850의 각각에 대해 19.2%/10.1%과 15.9%/9.76%를 보여주며, $R_{b}$값은 각각 10.9%와 8.54%, 그리고 S(GofF)값은 각각 1.9와 1.6으로 계산되었다. 합성된 양극소재는 공간군 R3m의 층상구조(LiMn $O_2$)가 존재하였으며, 전이금속 층 내의 Mn이 Li로 치환되면서(Li[L $i_{1}$3/M $n_{2}$3/] $O_2$) 단사구조(C2/c)의 거대격자(Superlattice) 구조현상도 관찰되었다. 계산된 단위포는 공간군 R3m, CR650이 a=2.8520(2)$\AA$, c=14.248(2)$\AA$, V=100.40(1)$\AA^3$이며, CR850은 a=2.8504(1)$\AA$, c=14.2371(7)$\AA$, V=100.179(8)$\AA^3$으로 각각 계산되었다. 또한 최종 결정된 화학식은 CR650은 Li[L $i_{0.35}$M $n_{0.56}$C $r_{0.09}$] $O_2$, CR850은 Li[L $i_{0.27}$M $n_{0.61}$C $r_{0.13}$] $O_2$으로 각각 구해졌다.다...다..구해졌다.다...다..

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.20-32
• /
• 1992

$Na_2O-CaO-MgO-Al_2O_3-SiO_2$계를 기본조성으로 하여 $Na_2O$에 $Li_2O 0.05wt%, $K_2O$를, CaO에 MgO 12.0wt%, ZnO 6.0%를 각각 치환하여 조성을 선정하였다. 기본 유리조성의 결정상은 wollastonite이고, 치환된 조성들은 diopside, diopside.tremolite의 혼정이 나타났다. $Na_2O$를 $Li_2O$로 치환한 시편은 열팽창계수가 감소하였지만 CaO를 ZnO로 치환한 시편은 열팽창 계수가 증가하였다. 곡강도에 있어서는 치환에 따라 모두 증가시켰다. 핵행성제로 $ZrO_2와 $CaF_2$를 각각 1~2wt%의 변화를 시켜본 결과 핵형성제 $ZnO_2$와 $CaF_2$가 1:1, 1:2인 시편은 $1000~1050^{\circ}C$온도에서 급격한 결정성장을 보였으며 1:2시편이 가장 낮은 열팽창 계수값을 나타냈다. 곡강도는 모두 $1000~1050^{\circ}C$의 결정화 온도 범위에서 높은 강도를 나타내었다. 결정화에 필요한 활성화 에너지는 Ozawa와 Kissinger식으로 plot하여 각각 55.24kcal/mol과 53.05kcal/mol이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.571-574
• /
• 2000

In this study, Tin oxide thin film for secondary battery was deposited on Pt/Ti/Si(100). It was fabricated by r.f. reactive sputtering with Tin metal target. At constant power (130W), pressure (Base 5$\times$10$^{-6}$ Torr, working 5$\times$10$^{-3}$ Torr) and at room temperature, it was fabricated by Ar/O2 gas ratio. After deposition, we got AFM & SEM to investigated surface of thin films and had XRD to find crystalline of thin films. Charge/discharge characteristics were carried out in 1M LiPF$_{6}$ , EC:DMC = 1:1 liquid electrolyte using lithium metal at room temperature.