• 제목/요약/키워드: 6FDA

검색결과 221건 처리시간 0.026초

진공증착중합에 의해 제조된 6FDA/4-4' DDE 폴리이미드 박막의 열처리 특성에 관한 연구 (A Study on the curing characteristics of 6FDA/4-4' DDE Polyimide thin film fabricated by vapor deposition polymerization)

  • 황선양;이붕주;김형권;김종택;김영봉;박강식;이덕출
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.816-818
    • /
    • 1998
  • In this paper Polyimide(PI) thin film are fabricated by vapor deposition polymerization(VDP) of dry process which are easy to control the film's thickness and hard to pollute due to volatile solvent. The FT-IR spectrum show that PAA thin films fabricated by VDP are changed to PI thin film by thermal curing. From AFM(Atomic Force Microscopy) experimental as the higher curing temperature. the thin film thickness decreases and roughness decresse.

  • PDF

Electrical Characteristics of Organic TFTs Using ODPA-ODA and 6FDA-ODA Polyimide Gate Insulators

  • Lee, Min-Woo;Pyo, Sang-Woo;Jung, Lae-Young;Shim, Jae-Hoon;Sohn, Byoung-Chung;Kim, Young-Kwan
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.770-772
    • /
    • 2002
  • A new dry-processing method of organic gate dielectric film in field-effect transistors (FETs) was proposed. The method use vapor deposition polymerization (VDP) that is continuous and low temperature process. It has the advantages of shadow mask patterning and dry processing in flexible low-cost large area applications. Here, 80 nm-thick Al as a gate electrode was evaporated through shadow mask. Gate insulators used two different polyimides. The one material was 4,4'-oxydiphtahlic anhydride (ODPA) and 4,4'-oxydianiline (ODA). Another was 2,2-bis(3,4-dicarboxyphenyl) Hexafluoropropane Dianhydride (6FDA) and 4,4' -oxydianiline (ODA). These were co-deposited by high-vaccum thermal-evapora and cured at 150 $^{\circ}C$ for 1 hour, respectively. Pentacene as a semiconductor and 100 nm-thick Au as a source and drain electrode were evaporated through shadow mask.

  • PDF

폴리이미드/제올라이트 막의 기체투과 특성 (The Gas Permeation Properties of Polyimide/Zeolite Membrane)

  • 최익창;김건중;남세종
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1998년도 춘계 총회 및 학술발표회
    • /
    • pp.46-48
    • /
    • 1998
  • 1. 서론 : 최근에 기체분리막의 재료로 많이 연구가 되고 있는 폴리이미드는 열, 화학적으로 안정하며 기계적 강도가 우수한 고분자재료이다. 그동안 본 연구실에서는 폴리이미드를 직접 합성하여 플라즈마처리, UV 처리등과 같은 고분자막수식에 의한 방법과, 무기재료와 폴리이미드를 이용하는 복합막 제조 등으로 폴리이미드의 투과특성을 향상시키는 연구를 진행해 왔다. 본 실험에서는 고분자재료로 폴리이미드 계열 중 가장 산소투과계수가 높은 6FDA-p-TeMPD 폴리이미드와 산소투과계수는 작고 선택도가 높은 6FDA-m-TeMPD 폴리이미드를 사용하였고, 무기재료는 surface pore size가 7.3${\AA}$, super cage가 13${\AA}$인 다공성 물질로 흡착력이 뛰어난 NaX형 제올라이트를 사용하였다. (생략)

  • PDF

비만 약물 치료의 최신 지견 (Recent Advances in Anti-Obesity Agents)

  • 김민경;김철식
    • The Korean Journal of Medicine
    • /
    • 제93권6호
    • /
    • pp.501-508
    • /
    • 2018
  • Obesity is a chronic disorder that is a significant risk factor for diabetes, cardiovascular diseases, malignancy, and other chronic diseases. Lifestyle modifications form the basis of most treatments for obesity, but it has become clear that such modifications alone are not enough for many obese patients. When a behavioral approach is insufficient, pharmacological treatment may be recommended. In recent years, the US Food and Drug Administration (FDA) has withdrawn several therapeutic options for obesity due to their side effects, but has approved four novel anti-obesity agents. Until recently, orlistat was the only drug approved for the management of long-term obesity, but the US FDA approved the novel anti-obesity drugs lorcaserin and phentermine/topiramate in 2012, and naltrexone/bupropion and liraglutide in 2014. The present review discusses the different pharmacotherapeutic options for the treatment of obesity.

동결-융해된 돼지난포란의 생존성에 대한 항동해제와 평형시간의 영향 (Effects of Cryoprotectants and Equilibration Time on the Viability of Frozen-thawed Porcine Oocytes)

  • 이장희;김창근;박충생
    • 한국수정란이식학회지
    • /
    • 제12권3호
    • /
    • pp.315-324
    • /
    • 1997
  • This study was undertaken in an effort to develop a cryopreservation system of immature and mature porcine oocytes. For this aim, the experiments were designed to examine the effect of cryoprotectants and equdibration time on the viability of frozen-thawed oocytes by using trypan blue(TB) and fluorescene diacetate(FDA) test. The viability of frozen immature oocytes evaluated by TB test was slightly higher than that of frozen mature oocytes. The viability(25.O%) after IVM of frozen-thawed immature oocytes greatly decreased that(42.9%) of oocytes just after thawing, but it was higher than frozen-thawed mature oocytes(15.8%). When immature oocytes were equilibrated for 10, 20 and 30 minutes before freezing the oocyte viability was 20.0, 31.3 and 42.9%, respectively. There was a tendency for long equilibration before oocyte freezing to be more effective for the immature oocytes and a short equilibration time for mature oocytes. Although there was no difference in viability index of frozen oocytes hetween the viability test methods, the index of TB test was slightly higher than that of FDA test. The viability(FDA test) of frozen-immature oocytes with 3 different crtoprotectants was 22.2% for propylene glycol(PG), 9.3% for polyehtylene glycol(PEG) and 65.6% for PG+PEG, in which PG+PEG was more protective against freezing effect.

  • PDF

In utero exposure to 2.3', 4.4', 5- Pentachlorobiphenyl (PCB 118) alters postnatal reproductive development in female rat

  • Kim, Soon-Sun;Rhee, Gyu-Seek;Kim, So-Hee;Sohn, Kyung-Hee;Kwack, Seung-Jun;Lee, Rhee-Da;Park, Chul-Hoon;Kil, Kwang-Sup;Choi, Kwang-Sik;Park, Kui-Lea
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
    • /
    • pp.296.2-296.2
    • /
    • 2002
  • Our previous study demonstrated that 2.3', 4.4'. 5- Pentachlorobiphenyl (PCB 118) showed an antiestrogenic activity in vitro and in vivo. In the present study. we examined the effect of PCB 118 on postnatal reproductive development in female rats. PCB 118 (0.001. 0.01 or 0.1 mg/kg/day) was administered to pregnant female SD rats from gestation day (GO) 6 to 18 via subcutaneous injection. and developmental parameters such as vaginal opening were determined. PCB 118 significantly delayed vaginal opening of female offsprings at dose of 0.1 ${\mu}g$/kg/day. whereas had no effects on body weights. In addition. in utero treatment of PCB 118 caused significant decreases in serum levels of E2, T3 and T4 in female oftsprings at certain doses on postnatal day (PND) 22. Our data of results indicate that in utero exposure to PCB 118 may postnatal reproductive development in female rat through its antiestrogenic activity.

  • PDF

식종물질이 음식물쓰레기 퇴비화정도 및 미생물활성에 미치는 영향 (Effect of Inoculating Materials on Food Waste Composting)

  • 남궁완;김미자;김정대
    • 유기물자원화
    • /
    • 제5권1호
    • /
    • pp.15-23
    • /
    • 1997
  • 본 연구는 음식쓰레기 분해촉진용으로 시판되고 있는 식종물질을 음식쓰레기에 첨가하여 처리했을 때의 음식쓰레기 분해정도를 숙성퇴비를 사용한 경우와 비교한 것이다. 시판 중인 식종물질로는 GM(Green Microorganisms)과 EM (Effective Microorganisms) 두가지를 실험대상으로 하였다. 음식쓰레기 분해효과를 비교하기 위하여 일반적인 퇴비화실험과 식종물질제품의 시방내용을 준수한 간이처리실험을 병행하였다. 음식쓰레기 분해효과는 온도와 VS 감소율, 그리고 FDA (Fluorescein DiAcetate) 가수분해활성의 변화를 통하여 비교하였다. 온도변화 및 도달한 최고온도를 비교할 때 일반퇴비화실험에서는 $55{\sim}57^{\circ}C$까지 상승하였으나 간이처리실험에서는 거의 온도상승이 관찰되지 않았다. 퇴비화실험에서는 숙성퇴비를 첨가한 음식쓰레기의 최고온도가 GM을 첨가한 경우보다 $2^{\circ}C$ 높았다. VS 함량의 변화를 볼 때 일반 퇴비화실험에는 VS가 27~32% 감소하였으나 간이처리실험에서는 불과 6~7%만이 감소하였다. 퇴비화실험에서 숙성퇴비를 첨가한 음식쓰레기의 VS 감소율은 GM을 첨가한 음식쓰레기의 경우보다 약 5% 높았다. FDA 가수분해활성도를 이용하여 측정한 미생물활성은 퇴비화실험에서는 초기 10일까지 증가한 후 감소하기 시작하였으나 간이처리한 음식쓰레기에서는 초반부터 줄곧 감소하였다. 수치상으로 대소를 비교하여 보면 초반에는 간이처리실험의 미생물활성이 일반퇴비화실험의 경우보다 높게 나타났으나 반응기간이 경과하여도 활성이 계속 감소하여 결국 일반 퇴비화실험보다 미생물활성이 전반적으로 낮았다. 퇴비화실험에서는 숙성퇴비를 첨가한 음식쓰레기의 미생물활성이 GM을 첨가한 경우보다 높았다.

  • PDF

선박평형수 처리장치 효율 검증을 위한 해양미소부유생물 생사판별기법 (A staining method to determine marine microplanktonic organism viability and investigate the efficacy of a ship's ballast water treatment system)

  • 백승호;신경순
    • 한국산학기술학회논문지
    • /
    • 제16권6호
    • /
    • pp.4328-4334
    • /
    • 2015
  • 본 연구는 선박평형수처리장치 성능을 평가하기 위한 일환으로 Evan blue, Aniline blue 그리고 CMFDA 염색방법을 활용하여 해양부유생물의 생사판별을 이해하고자 하였다. Evans blue와 Aniline blue의 염색은 죽은 생물을 파란색으로 염색하여 죽은 생물을 평가하는 방법이고, CMFDA의 방법은 살아있는 생물을 녹색으로 염색하여 평가한다. 현장 동 식물플랑크톤 군집을 대상으로 Evans blue와 Aniline blue의 방법을 적용한 결과, 죽은 생물을 90%이상 염색시키는 것으로 나타났다. 하지만, 살아있는 일부 식물플랑크톤의 군집에서도 파란색으로 염색 되어, 실제 선박평형수 처리장장치의 성능을 평가하기에는 일정의 한계성을 나타내었다. 한편, 살아있는 생물을 염색하는CMFDA방법을 적용한 결과, 현장의 부유생물의 70%의 염색효과를 보였다. CMFDA방법은 FDA방법과 유사하게 살아있는 생물을 녹색으로 염색하여 생물 생사판별이 가능하게 함으로, 두 가지 방법을 중복염색(double staining)하는 방법을 고안해 보다 높은 효율의 생사판별방법을 찾고자 노력하였다. 그 결과, 두 가지의 염색시약을 중복으로 염색한 실험군에서 95%이상의 높은 효율을 보였고. 이는 단일 염색한 실험군보다 상대적으로 높은 염색효율을 얻을 수 있었다. 따라서 CMFDA+ FDA를 중복염색한 평가법이 해양생물의 생사를 판별하는데 보다 높은 효율을 보였고, 선박평형수처리장치의 성능을 평가하는 방법으로 활용이 가능할 것으로 판단된다.

가교형 이미드 올리고머 제조 및 듀얼 오브너블 용기(Dual-Ovenable Packaging) 용 폴리에테르이미드에 대한 적용 연구 (Preparation of crosslinkable imide oligomers and Applications in Polyether Imides for Dual-ovenable Packaging)

  • 서종철;박수일;최승혁;장원봉;한학수
    • Korean Chemical Engineering Research
    • /
    • 제48권1호
    • /
    • pp.45-52
    • /
    • 2010
  • 본 연구에서는 Dual-Ovenable Packaging 용 폴리에테르이미드의 수분흡수 특성을 개선하기 위하여 가교구조를 형성할 수 있는 말단기를 포함한 이미드 올리고머를 신규 합성하였으며, 이를 이용한 폴리에테르이미드와 가교구조 (semi-IPN, semi-interpenetrating network)를 형성을 통하여 수분흡수와 열적 특성 변화, 그리고 구조적 특성에 대하여 조사하였다. 가교 말단기와 용액 이미드화법을 이용하여 두 종류의 이미드 올리고머 6FDA-ODA/APA와 6FDA-MDA/MA를 제조하였으며, 그 특성을 고찰하였다. 또한 이미드 올리고머와 $Ultem^{(R)}$ 혼합물의 semi-IPN 구조를 제조하였으며, 열적 성질, 수분흡수 거동, 그리고 박막의 구조적 특징을 TGA, Thin Film Diffusion Analyzer, 그리고 XRD 분석을 이용하여 해석하였다. 제조한 이미드 올리고머는 말단기의 양을 이용하여 분자량 조절이 가능하였다. 그리고, 온도가 증가함에 따라 가교에 의한 발열반응이 일어나며, 가교 가능한 말단기가 증가할수록 발열량이 증가하였다. $Ultem^{(R)}$과 이미드 올리고머 혼합물에 의한 semi-IPN 구조는 이미드 올리고머의 비율이 증가할수록 5와 10% 질량감소 온도가 상승하였다. 또한, 수분에 대한 친화도가 작은 불소기를 함유하는 이미드 올리고머와 패킹정도의 증가로 인하여 semi-IPN의 확산계수와 수분흡수량이 감소하였다. 이와 같이 열적 성질과 수분에 대한 안정성이 떨어지는 단점을 semi-IPN 구조를 통하여 보완할 수 있었다.

6FDA-p-TeMPD 폴리이미드 비대칭막 제조에서 용매와 비용매가 막구조에 미치는 영향 (The Effects of Solvent and Nonsolvent on Asymmetric Membrane Structure of 6FDA-p-TeMPD Polyimide)

  • 박노춘;김건중;남세종
    • 멤브레인
    • /
    • 제8권3호
    • /
    • pp.157-169
    • /
    • 1998
  • 폴리이미드(6FDA-p-TeMPD) 비대칭막을 습식 상분리법으로 제조하는데 있어서 그 구조에 미치는 용매 (DMAc, NMP, 1,4-dioxane)와 비용매($H_2O$, Methanol, n-hexane)의 영향을 고찰하였다. 고분자/용매/비용매 분리 속도를 예측함으로써 생성된 비대칭막의 구조를 해석하였다. 용해도 곡선이 용매-고분자 축에 가깝고, 응결값이 작으며, 광투과도가 즉시 감소하고, 용해도 계수차가 $\Delta \delta_{S-NS} > \Delta \delta_{P-NS} > \Delta \delta_{P-S}$ 순이면 생성막은 고분자 결절의 불연속 결집속에 finger-like pore가 형성되었다. 용해도 곡선이 용매-고분자 축에서 멀고, 응결값이 크며, 상분리 시간이 길고, 용해도 계수차 $\Delta \delta_{i-j}$$\Delta \delta_{P-NS} >(\Delta \delta_{S-NS} < > \Delta \delta_{P-S})$ 일때, 생성되는 막은 미소 고분자 결절구가 치밀하게 응집된 표피가 있으며, 고분자 연속상 스폰지층에 macropore가 발달되었다. 용해도 곡선이 용매-고분자 축으로부터 멀리 떨어지고, 응결값이 대단히 크며, 상분리 시간이 길고, 용해도 계수차 $\Delta \delta_{i-j}$$\Delta \delta_{S-NS} > (\Delta \delta_{P-NS}$\lessgtr$)\Delta \delta_{P-S}$인 경우는 고분자 미소 결절의 두터운 응집층과 다음에 성근 결절응집층이 나타났다.

  • PDF